1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | LOWER TOW HOOK |
1 x | Adjustable launching hook |
1 x | SERVO HOLDER |
1 x | Tow hook for tug |
1 x | Fixed launching hook |
3 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Motor DLE 200cc Std |
3 x | Propeller FALCON 32,5x11 PUSHER Carbono |
4 x | Motor DLE 170 M- Paramotors |
2 x | Small Crow DLE-170M |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Silent-blocks DLE 170M |
2 x | Motor DLE 200cc Premium Muffler |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
3 x | Round Rod 1,25x1000 mm |
1 x | Round Rod 1,5x1000 mm |
2 x | Strip 2,0x2,0x330 mm |
2 x | Round Rod 3,0x1000 mm |
3 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
2 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Round Rod 2,5x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
2 x | Strip 1,5x1,5x330 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | SE Ring 300 mm (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Cinta Goldfix 1m |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Tape GFK 25 mm |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Threaded coupler M2 (10 uds) |
2 x | Angled clevis with threaded rod M3 |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Ferrita 27x14x7 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Propeller POWER-PROP 13x9 Izda |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
2 x | Propeller POWER-PROP 14x9 |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Blue smoke canister 140 g |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Soporte filtro FESTO (4 pcs) |
2 x | Round Rod 5,0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Cable video GoPro |
1 x | Tap FESTO 6-6 mm |
1 x | SERVO DES 588 BB MG |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | SERVO DES 658 BB MG |
1 x | Servo TOPMODEL DS1413 T |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
2 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Gear for MICRO BB |
2 x | Z-shaped servo mount |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | White aluminium 230 mm landing gear |
1 x | PowerBox MAG Sensor |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
2 x | Bearing block for noseleg landing gear |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Tail wheel for 8-12 kg models |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | PowerBox iGyro SAT |
2 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Fail Safe air retract |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Servo HITEC D145 SW |
2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Body for landing gear Ø 3 mm |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo AN-20 MGBBA |
1 x | Charging Extension 50cm for 2 Battery |
1 x | 2 piece mounting frame |
2 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | T-Hose connector 4-4-4mm |
1 x | 90x75 mm standart servo cover |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Servo HITEC D951 TW |
1 x | SERVO DES 568 MG |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | 11 mm wing servo holder |
1 x | Wing Joiner ULTIMATUM 2.0 m |
2 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | T-Hose connector 3-3-3 mm |
1 x | PowerBox Battery 4000 |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | PowerBox 12 |
2 x | Futaba 30 mm servo rounded arm |
1 x | POWERBOX Magic Jeti Switch Royal SRS, Champion SRS |
2 x | SU 29S 140 carbon landing gear |
1 x | USB programador GO servos |
1 x | T-Hose connector 3-3-3 mm |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | 90x60 mm standart servo cover |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Servo HBS 690BB HV Digital |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | 13 mm wing servo holder |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Tail wheel for 5-8 kg models |
2 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Hitec 20 mm servo arm |
1 x | Servo AN-8 HBA |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Hitec 38 mm servo arm |
2 x | Adapter rotula M3 |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Servo HITEC D645 MW |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | PowerBox Evo |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Flap hinge (6 pcs) |
1 x | PowerBox MERCURY SR2 |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Ball bearing 6003 DLE |
3 x | Big Crow DLE-170M |
2 x | Motor holder for AC 28/7 |
2 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | DLE 111 Old Crankshaft keyway |
1 x | Canister combo DLE 170 cc |
1 x | Carburetor DLE 170 |
1 x | DLE 85/111/120 Crankshaft keyway |
2 x | Propeller POWER-PROP 7x7 |
2 x | Motor DLE 430 cc - Paramotors |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | MAMBO 17 |
1 x | Cooler motor type 300 |
1 x | AXI 2814/12 V2 Long |
1 x | VM 2020/20 rear |
1 x | MIG AC 400 /14 |
1 x | XPower XC5030/14 LS |
1 x | Bearing 698-2Z for AXI 5330/xx |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Device Terminal |
1 x | Servo SAVOX SV-1273 TG |
1 x | AXI 2814/16 V2 Long |
1 x | Servo SAVOX SB-2290 SG |
1 x | AXI 2820/14 V2 |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | 2020 motor power ring |
1 x | AXI 2820/10 V2 Long |
1 x | AXI 2814/20 V2 |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | SAVOX SH 1250 MG servo digi |
1 x | AXI 2820/12 V2 Long |
1 x | Servoarm Aluminium SH-82 |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | Adaptadores carga 6s JST-XH |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Electromotor starter EME 35cc |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Electric Fuel Pump 12v |
1 x | Racor 3/3 mm |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Propeller MENZ-S 18x10 |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Propeller MENZ-S 21x10 |
1 x | Propeller MASTER 5,5x4,5 |
1 x | Propeller MENZ-S 20x10 |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | 12x8 tree blades propeller |
1 x | Propeller MENZ-S 18x12 |
1 x | SSPS105 Super Hi-Power servo |
1 x | Compact on-board starting system (9512) |
1 x | ALU servo arm 3 mm shaft |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Servo holder for retract |
1 x | AXI 2826/6 V2 |
1 x | AXI 2808/16 V2 |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | XPower XC4226/12 LS |
2 x | DLE 111 pipe plug |
1 x | Axle for AXI 2814/xx motors |
1 x | Axle for AXI 2217/xx motors |
1 x | Axle for AXI 2208/xx motors |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | POLARON EX 800w charger |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DLE 30 complete electronic ignition |
1 x | Servo HITEC HS-7245MH |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Decorative caps, multicoloured |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Servo HITEC HS-635HB Carbonite |
1 x | Distanzstück motor OS 120 AX |
1 x | MZ-18, 9 Channel HoTT |
1 x | Ignition bed V2 Red color |
1 x | Servo HITEC HS-5685MH |
1 x | Decorative caps, multicoloured, short |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo HITEC HS-65 MG |
1 x | Electric Fuel Pump 12V |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | PowerBox OLED display |
1 x | Aero shocks |
1 x | Quick hose connector 4-4 mm |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Power Box GPS Sensor III |
1 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | Propeller MASTER 6x3 |
1 x | Propeller MENZ-S 15x10 |
1 x | Propeller MENZ-S 20x8 |
1 x | Helice CLASSIC-Prop 20x10 |
1 x | Propeller MASTER AIRSCREW 13x6 |
1 x | 9x7 tree blades propeller |
1 x | Propeller POWER-PROP 16x8 |
1 x | 8x6 tree blades propeller |
1 x | Propeller G-Sonic 20x8 |
1 x | Propeller MASTER 7x3 |
1 x | Propeller MENZ-S 17x10 |
1 x | Propeller MENZ-S 18x10 3-Blades |
1 x | Propeller POWER-PROP 16x10 |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Propeller POWER-PROP 14x10 |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Propeller MENZ-S 17x6 |
1 x | Propeller MASTER 7x6 |
1 x | Propeller MASTER 6x3,5 |
1 x | Propeller POWER-PROP 15x8 |
1 x | Propeller MENZ-S 16x6 3-Blades |
1 x | Propeller MENZ-S 19x12 |
1 x | Propeller MENZ-S 21x10 3-Blades |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | Propeller MENZ-S 17x8 |
1 x | Propeller MENZ-S 20x12 |
1 x | Propeller MENZ-S 16x6 |
1 x | Glow starter with charger 230v |
1 x | Kavan Car 25% nitro 1l |
1 x | Propeller MENZ-S 20x12 3 blades |
1 x | Propeller POWER-PROP 12x8 |
1 x | Propeller MENZ-S 21x8 |
1 x | Propeller POWER-PROP 11x9 |
1 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Extra long horn 60x30 |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller MASTER 7x5 |
1 x | Propeller POWER-PROP 15x10 |
1 x | Fuel bottle 500 ccm |
1 x | Propeller POWER-PROP 11x8 |
1 x | 12x6 tree blades propeller |
1 x | Propeller MENZ-S 16x8 3-Blades |
1 x | MASTER 16x10 tree blades propeller |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | Propeller MENZ-S 18x6 |
1 x | Propeller MENZ-S 15x6 3 blades |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | 11x7 tree blades propeller |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller MENZ-S 19x8 3-Blades |
1 x | Propeller MASTER 6x4 |
1 x | Propeller MASTER 5,5x4 |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Spark motor OS nº 8 |
1 x | Mobile Terminal |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | Servo HITEC D950 TW |
1 x | Fiberglass landing gear for 140-160 |
1 x | Servo HITEC D941 TW |
1 x | Gear set HITEC HS-65 HB |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | ULTIMATUM 2.0 PRO "McLAren" |
1 x | Metalic nose for PROJETI |
1 x | Extension MPX-MPX 20 cm |
1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
1 x | Motor mount class 48" |
1 x | Motor mount EDGE 540 48" |
|
54,149.97EUR |