1 x | Engine Kolm BX-155-2 with starter |
2 x | Canister combo DLE 170 cc |
2 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | DLE 55 Muffler |
2 x | DLE Ignition 111/120/170 |
1 x | DLE 55-RA Muffler |
1 x | DLE 111 Old Crankshaft keyway |
1 x | Cylynder DLE 20-RA |
1 x | Piston ring for DLE-20 RA |
3 x | Cilinder DLE 30 - DLE 60 |
2 x | Hub propeller DLE 111 V3/120 |
1 x | DLE Ignition 170M |
2 x | Carburetor DLE 30 |
2 x | DLE-55RA Ignition unit |
3 x | Canister combo DLE 120 cc |
2 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Motor holder for AC 28/7 |
2 x | CILINDER FOR DLE55, DLE111, DLE222 |
1 x | GASKET SET FOR DLE40 |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Connectors banna oro 0,8 mm (M/F) |
2 x | Soporte grifo FESTO (2 pcs) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Spinner propeller pleg. 38 mm / 4 mm |
1 x | EasyFLY Addon |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Motor support DLE 55/55RA |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
2 x | Muffler DLE 30 |
1 x | Carburetor DLE 170 |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | Kit repair carburator DLE-170 |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
2 x | Motor ROTO-35 FS BM 4T |
1 x | Piston DLE 30 - DLE 60 |
1 x | Sensor Ignition DLE 20/20RA/30/35RA/55/55RA |
1 x | Connector CAN 15 |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Oracover GREY Seafire Sea 2m |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
1 x | Conector BEC male (10 pcs) |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Ply-Span 450x600/13g Orange |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | Ply-Span 450x600/13g Blue |
1 x | Ply-Span 450x600/13g Yellow |
2 x | Spare white 38-45 mm spinner |
1 x | Spare white 38-45 mm spinner |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | |
1 x | BALSA trip 10x10x1000 mm |
1 x | Gasket set DLE-30 |
1 x | Interface Jack Adapter IKARUS |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | UMS radial-engine, 7 cylinder 90ccm, gas |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Oracover Azul Cielo 2 m |
1 x | 30 cm DEANS female connector |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | DLE 111 pipe plug |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Ignition RM-25V |
1 x | DLE 55 RA pipe plug |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | Ball bearing 6002 DLE |
1 x | Motor UMS Radial-5-125cc gas |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Connectors DEANS (T) |
1 x | GameCommander USB Universal |
1 x | Gasket set DLE-55 |
1 x | Oracover White 2 m |
1 x | Muffler DLE-120 Left |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Gasket set DLE-20 |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Muffler DLE-120 Right |
2 x | Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61 |
1 x | Needle bearing DLE55-RA |
1 x | Z Spinner (CN) 35mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Oracover Orange 2 m |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
2 x | Ferrita 14x8x5.5 mm |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | 90° TUBE-ANGLE Ø 25 mm |
1 x | Dia. 16x35 mm PTFE tube for escape |
1 x | 5 mm gas motor standoff |
1 x | Gasket for motor DA 50 |
1 x | Porex gasoline filter |
1 x | Metalic joint for DA-85/DA170 cilinder/elbow |
1 x | Tubo Teflon Ø25 mm x 10cm |
1 x | Pendulun 27g to tank |
1 x | Extension Ø25mm x L: 60 mm |
1 x | Gasoline filter |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Tube Pitot to PIXHAWK |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Motor OS 3820-1200 electric |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | PHASOR RACE 2035/2100 2D |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Piston DLE 55/111/22 |
1 x | Connectors MPX black male |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Oracover White 10 m |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Giant Scale Muffler D.A. 150 (2 pcs) |
1 x | Saito FG-36 motor support |
1 x | EXHAUST STACK Ø 28 mm DA75/150B2 |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Spark Plug BRISK M14x1.25 |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Support conector MPX (6 pcs) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Spare spinner 65 mm 3-Bl |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | DLE 55 Ignition unit |
1 x | Central piece 62 mm 0º |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
1 x | Spinner 3BL propeller pleg. 36 mm / 4,0 mm |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Central piece 42 mm 0º [6 mm] |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Spare spinner 36 mm 3-Bl |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Central piece 52 mm - 5º |
1 x | Red spinner 45 mm |
1 x | Motor support DLE 30 (1 pcs) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Spare white 30-36 mm spinner |
1 x | Rubber profile 10-2 mm 2M |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Conector JR Servo male (10 pcs) |
1 x | Connectors DEANS (T) micro |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Motor UMS Radial-5-150cc gas |
1 x | RM-130FSI 4-stroke inline gasoline airplane 3 cylinder |
1 x | 30 cm MULTIPLEX female connector |
1 x | Oracover Yellow CADMIO 2 m |
1 x | Oracover ROYAL RED 2m |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Release film 100 cm x 50 m |
1 x | Socket Head Screw M2x8 |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | KS86 V muffler up to 65cc |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Stainless Steel Bend D 20x0,6mm |
1 x | Pitts Muffler for D.A. 120 |
1 x | Stainless Steel Bend D 15x0,4mm |
1 x | 10 mm floating pad (72 pcs) |
1 x | EXHAUST STACK Ø 25 mm DLE 55, ZDZ 50-100B2, 3W60/120B2, ... |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Screw M4x20 (10 pcs) |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Socket Head Screw M2,5x12 |
1 x | 12 mm floating pad (49 pcs) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Central piece 52 mm 0º |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
|
25,551.73EUR |