2 x | BALSA trip 4.0x4.0x1000 mm |
4 x | Balsa panel 6.0x100x1000 mm |
4 x | Balsa panel 2.0x100x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
3 x | A/C quality beech plywood 600x300x0.6 mm |
3 x | Balsa panel 2.5x100x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
3 x | Balsa panel 5.0x100x1000 mm |
4 x | Balsa panel 10x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
3 x | Balsa panel 3.0x100x1000 mm |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
4 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Beech dowels 4.0 x 1000 mm |
3 x | Birch plywood plate 600x300x3.0 mm |
2 x | Balsa panel 1.5x100x1000 mm |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
3 x | Balsa panel 1.0x100x1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
2 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
2 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | A/C quality beech plywood 600x300x8.0 mm |
2 x | Lite Plywood panel 600x300x2.0 mm |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Short ball link M2 (6 uds) |
1 x | Ball link M2,5 (10 pcs) |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | M3 Maxi ball link (2 uds) |
2 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | ABS angle 5,0x5,0x1000 mm |
2 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Joint with bearing M2 22x5,5 |
2 x | Ball link M1.6 (6 uds) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Long ball link M1.6 (6 uds) |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | 6 mm ball link M3 (10 pcs) |
2 x | Ball link M2 (10 pcs) |
2 x | M3 Maxi ball link (2 uds) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Profile ABS half cane 2.5x1000 mm |
2 x | T-Connector 4.0 mm x 1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
3 x | Profile ABS Square 4 x 1000 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Short ball link M1.6 (6 uds) |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Pilot "Goose" (Slimline) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | 1/6 Pilot "Tony" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 1/4 Pilot "Mike" |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Covered closure or fairings |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Cable with accesories |
2 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
2 x | Z Bender - S Type Tool |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Xplorer4 anemometro |
1 x | Ball Link Plier |
2 x | Squared carbon wing joinner 5x5x220 mm |
2 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Propeller POWER-PROP 7x7 |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Long ball link M2 (6 uds) |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Socket head long ball link M3 (6 uds) |
3 x | ABS angle 1.5x1.5x1000 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | 1/10 Pilot "Jack" |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Profile ABS half cane 4x1000 mm |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Profile ABS half cane 5.0x1000 mm |
1 x | Ball link M3 (10 pcs) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
2 x | Piloto jet 130 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Cabel "Y" 15 cm |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Extension 15 cm (Futaba) |
1 x | TMM 2512-3S heli |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Extension 100 cm (Futaba) |
1 x | Indoor Brushed motor kit |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Cooler motor type 400 |
1 x | LA500 rotor head shaft |
2 x | Rotorshape Elevator |
2 x | Propeller MENZ-S 21x8 |
2 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
2 x | Propeller MENZ-S 20x9 |
1 x | 3D Spinner for DLE 30 |
2 x | Propeller MENZ-S 18x10 3-Blades |
2 x | 70 mm aluminium spinner. |
2 x | Connectors MPX female |
2 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Spinner 100 mm CFK |
2 x | Propeller MENZ-S 15x10 |
2 x | Propeller MENZ-S 17x8 |
2 x | Connectors DEANS (T) micro |
2 x | Propeller MENZ-S 19x10 |
1 x | Head upper part |
1 x | Wheel keeper washer |
1 x | Bearing housing |
1 x | LA500 pre-rotation gear hub |
2 x | LA500 tail empennage |
1 x | Head lower part |
1 x | Cierva C30 Body Spain |
2 x | Head core |
2 x | LA500 cyclic central part |
2 x | Autogyro Cierva C30 Spain |
1 x | LA500 Autogyro |
1 x | LA500 Blades |
1 x | LA500 ciclic lever |
1 x | LA500 rotor head core |
1 x | Balls 4 mm |
1 x | Steering lever |
1 x | LA500 housing-upper cyclic |
1 x | Rotorshape Autogyro |
1 x | Blades 330mm |
1 x | Grub screw M3x3 shouldered (2 pcs) |
2 x | Cierva C30 spanish decoration Stickers |
1 x | Head core bushing |
2 x | Raer wall |
1 x | Motor rotor LA-500 |
2 x | 45 mm aluminium spinner. |
3 x | Propeller MENZ-S 20x10 3 blades |
2 x | Propeller MENZ-S 21x12 |
3 x | Propeller MENZ-S 18x8 |
1 x | Connectors MPX male |
4 x | Propeller MENZ-S 18x12 |
1 x | Spinner 140 mm GFK |
2 x | Propeller MENZ-S 18x6 |
3 x | Propeller MENZ-S 16x10 |
1 x | 75 mm spinner (Carbon Imitation) |
2 x | Propeller MENZ-S 17x10 |
1 x | Spinner 115 mm GFK |
2 x | Propeller MENZ-S 16x6 |
1 x | Spinner 100 mm GFK |
1 x | Spinner 60 mm GFK |
4 x | Propeller MENZ-S 19x8 |
1 x | Propeller MENZ-S 16x12 |
1 x | 95 mm aluminium spinner. |
3 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Propeller FOXY 34x12 2-Bl |
2 x | Spinner 105 mm CFK |
2 x | Propeller MENZ-S 15x6 |
1 x | 64 mm aluminium spinner |
1 x | Spinner 110 mm GFK |
1 x | Spinner 105 mm GFK |
1 x | Propeller G-Sonic 20x8 |
1 x | Spinner 90 mm GFK |
1 x | Spinner 90 mm CFK |
1 x | Propeller KAVAN 32x12 2-Bl |
2 x | Propeller MENZ-S 15x8 |
3 x | Propeller MENZ-S 15x8 3 blades |
1 x | Starter EM Gear Power 250 |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Pick up DA50/100/150 |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Cylinder ZG 26SC/SLH |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Spring clamp for tube Ø50 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | AXI 2814/16 V2 Long |
1 x | Rubber profile 10-2 mm 2M |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Motor Advance 50-6 |
1 x | Universal Prop Saver |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | AXI 2217/12 V2 |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | AXI 2808/16 V2 |
1 x | AXI 2814/16 V2 |
1 x | 3 LiPo XH>EH adapter |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | AXI 2826/6 V2 |
1 x | 2020 motor power ring |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | AXI 2814/10 V2 |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | AXI 2814/12 V2 |
1 x | AXI 2814/12 V2 Long |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | AXI 2212/12 V2 |
1 x | AXI 2820/8 V2 Long |
1 x | AXI 2814/10 V2 Long |
1 x | AXI 2808/20 V2 Long |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Extension 90 cm (Futaba) |
1 x | Extension silicon 50 cm (Futaba) |
2 x | Extension silicon 75 cm (Futaba) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Cable Cargador FUTABA |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | AXI 2826/12 V2 Long |
1 x | AXI 2826/6 V2 Long |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | LA500 pilot-seat set |
1 x | Cable video GoPro |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Spinner 159x200 mm GFK |
1 x | Cable video GoPro and 5V cable |
1 x | RX external cable for estandar receivers |
1 x | MR30 connector female |
1 x | Tank gas KUZA 500 cc |
1 x | Spinner INOVA 63 mm White |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | Female connector for 6 pines AWG |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Oils Pumps Empty (1 liter) |
1 x | Xplorer2 anemometro |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Tank gas KUZA 260 cc |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | Crystal Universal RX 35.030 Ch 63 |
2 x | Xplorer1 anemometro |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Extension silicon 25 cm (Graupner) |
1 x | diameter silicone tube for glow |
1 x | KS86 S-6 muffler up to 65cc |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Copier 5x20 cm pcs |
2 x | Propeller MENZ-S 16x8 3-Blades |
1 x | Fod Guard 73x32 mm |
1 x | Propeller MENZ-S 20x6 |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Propeller MENZ-S 17x6 |
1 x | Oracover White 10 m |
1 x | BLUE Colored Liquid smoke for turbine 0.75 l |
1 x | Rotorhead pushrod |
1 x | Screws flush mount M2 |
1 x | Motor wall |
1 x | Bearing 3x6x2,5 |
1 x | Propeller MENZ-S 34x18 |
1 x | Sensor Ignition RCEXL Universal |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Propeller MENZ-S 18x10 |
1 x | Carburator Moki S 180 |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Propeller MENZ-S 34x12 |
1 x | Spinner 125 mm GFK |
1 x | 800TVL CMOS camera for FPV |
1 x | 90 mm CFK long Spinner fixed by a central screw |
1 x | Propeller MENZ-S 19x8 3-Blades |
1 x | Carburator Moki S400 |
1 x | LiPo Storage Box Type "BIG" |
1 x | Propeller MENZ-S 19x12 |
2 x | Propeller MENZ-S 20x12 3 blades |
1 x | Propeller MENZ-S 18x8 3-Blades |
2 x | Propeller MENZ-S 15x6 3 blades |
1 x | Propeller MENZ-S 20x8 |
2 x | Propeller MENZ-S 20x10 |
1 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Propeller MENZ-S 21x10 |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 38 mm aluminium spinner. |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | Spinner plastic white fixed propeller 45 mm |
1 x | EME 55 cc carburetor WALBRO |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | 550 cc gasoline fuel tank complet |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | Escape Moki 100 BVT |
1 x | Fod Guard 83x32 mm |
1 x | Male connector for 10 pines AWG |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Spinner INOVA 45 mm White |
1 x | Hot Glue Stick BLACK |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Propeller MENZ-S 15x12 |
1 x | Propeller MENZ-S 16x6 3-Blades |
1 x | AC-10 pre-rotacion with motor |
1 x | |
1 x | "Taxi Tank" Fuel Tank |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Male connector for 6 pines AWG |
1 x | Fuel tank 500ml (17oz) |
1 x | Charger SKY RC D200 neo |
1 x | Propeller MENZ-S 21x10 3-Blades |
1 x | 51 mm INO spinner (carbon imitation) |
1 x | Female connector for 10 pines AWG |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Cockpit aluminium closing |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | O-Ring SAITO FG-60 R3 |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Tape GFK 25 mm |
1 x | Dust collector for mould cleaning |
1 x | Partall paste 650 g |
1 x | KS86 V muffler up to 65cc |
1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
1 x | Baseplate servo |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Cockpit plastic closing |
1 x | E-FUN BUG (ROI-Import) |
|
13,593.62EUR |