2 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | |
3 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
4 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | 20x200 mm battery rings |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
3 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | 800TVL CMOS camera for FPV |
2 x | Big Crow DLE-170M |
2 x | Motor DLE 430 cc - Paramotors |
2 x | Motor DLE 200cc Std |
2 x | Medidor ángulos y/o incidencias |
2 x | Propeller balancer |
2 x | Angle measurer |
2 x | Field folding model stand |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Field folding model stand SebArt |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Balsa panel 2.5x100x1000 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Balsa panel 1.0x100x1000 mm |
2 x | Balsa panel 5.0x100x1000 mm |
4 x | BALSA trip 5.0x5.0x1000 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | Canopy Latch |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Strip 3,5x1,75x330 mm |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
5 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
3 x | Straightened rod Ø 4.5 mm x 1000 mm |
3 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Straightened rod Ø 14.0 mm x 1000 mm |
4 x | Straightened rod Ø 5.5 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | SE Ring 250 mm (2 pcs) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Cinta Goldfix 1m |
1 x | Marker ties (20 pcs) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Tape GFK 50 mm |
2 x | Motor DLE 200cc Premium Muffler |
1 x | ESC ALPHA 60A HV |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
3 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Small Crow DLE-170M |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
3 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Motor DLE 170 M- Paramotors |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
4 x | Beech dowels 2.0 x 1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Landing gear strap large (4 uds) |
1 x | Body for landing gear Ø 4 mm |
2 x | Battery LiPo GENS 2200 mAh 3S 11.1v 45C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace) |
3 x | Foam plastic plates (310x210x2 mm) |
3 x | Foreman, scale 1:32 |
3 x | Adjustable brass horn threaded M3 |
2 x | MZ-12, 6 Channel HoTT |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Spikes Band (5 m) |
2 x | Distanzstück motor OS 120 AX |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Faucet FESTO |
1 x | Y-Hose connector 4-4-4mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Quick hose connector 6-6 mm |
1 x | Y-Hose connector 4mm |
1 x | 40 mm air cylinder |
1 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace) |
1 x | Lipo GENS 200 mAh 1s 3.7 45C (2 pcs) |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace) |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
2 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
1 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace) |
2 x | Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace) |
1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case) |
2 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
1 x | Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace) |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
1 x | Battery LiPo GEN2700 mAh 3S 11.1v Transmitter Pack (Gens Ace) |
1 x | Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5500 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
1 x | Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace) |
2 x | Beech dowels 4.0 x 1000 mm |
2 x | Flap hinge (6 pcs) |
3 x | Decorative caps, multicoloured |
3 x | Conector JAPAN G2 Set 5 pares |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
4 x | Beech dowels 3.0 x 1000 mm |
3 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | MZ-18, 9 Channel HoTT |
2 x | Receiver Crystal 35 Mc/s Ch 62 |
2 x | MZ-10, 5 Channel HoTT |
1 x | PIX Hawk with accesories |
1 x | Receiver replacement antenna, approx. 85 |
3 x | Charger LiPo Charger4 |
1 x | Hose clips 6 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Quick hose connector 6-4 mm |
1 x | Manometer 4 mm |
2 x | Propeller hub spacer 8/5.5 |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
2 x | Blades 330mm |
3 x | PPM Encoder Module |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
2 x | Decorative caps, multicoloured, short |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | 16x10 BIELA propeller (3-blades) |
1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
1 x | MEKP Harderner 100 g |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | KIRA 400-39 5,2:1 |
1 x | KIRA 500-26 6,7:1 |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | Gearbox KPG25- 5,2:1pinion |
1 x | Propeller MASTER 7x6 |
1 x | Propeller MEJLIK 16x11 3 Blades |
1 x | 18x8 BIELA propeller |
1 x | Silent-blocks DLE 170M |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Parachutist |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Me-163 |
1 x | Parachute expulsion foam |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Electric rocket starters (6 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | Tape GFK 38 mm |
1 x | Surface Indicator Gauge Small |
1 x | Lipo GENS 400 mAh 7.4v 35C |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Lipo GENS 1000 mAh 3s 11.1v 30C "Soaring" |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Battery LiPo TATTU 450 mAh 2S 7,4V 75C |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Central support Speed 600 |
1 x | Servo HBS 690BB HV Digital |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Ring 320 mm length (5 pcs) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
3 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Mini Infrared Thermomiter |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Aluminium sheet 500x250x0,5mm |
2 x | Foam plastic plates (310x210x8 mm) |
1 x | Axi for MVVS 3.5 Sport |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | FOXY G2 C3530-700 |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | Actro 32-3 Heli MAX 5mm |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Battery LiPo TATTU 3700 mAh 4S 14,8V 45C |
1 x | Battery LiPo GENS 6750 mAh 4S 14.8V 100C (Gens Ace Hard Case) |
1 x | Lipo GENS 5300 mAh 4s 14.8v 60c Hard Case |
2 x | Lipo GENS Soaring 1000 mAh 2s 7.4v 30C |
1 x | Battery LiPo TATTU 10000 mAh 6S 22,2V 25C |
1 x | Battery LiPo GENS 6500 mAh 3S 11,1V 60C (Gens Ace) |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | 28 mm tailwheel unit |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | SERVO DES 707 BB MG, Pignons |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Coupling bush 5 - 5 mm |
1 x | AXI 2212/20 V2 |
1 x | AXI 2814/6D V2 |
1 x | AXI 2217/16 V2 |
1 x | AXI 2814/16 V2 Long |
1 x | AXI 2814/16 V2 |
1 x | AXI 2808/20 V2 |
1 x | AXI 2814/12 V2 |
1 x | 120x60 mm SLH KOVO wheel |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
1 x | Propeller VESS 27A |
1 x | Lipo GENS Soaring 3300 mAh 3S 11.1v 30C |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | Lipo GENS Soaring 2200 mAh 3S 11.1v 30C |
1 x | Battery LiPo GENS 5800 mAh 4S1P 14,8V 45C (Gens Ace) |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Battery LiPo GENS 6000 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
1 x | Battery LiPo TATTU 2000 mAh 3S 11,1V 100C |
1 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
1 x | Lipo GENS Soaring 4000 mAh 3s 11.1v 30C |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Battery LiPo GENS 6000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Battery LiPo GENS 8500 mAh 2S 7.6V HV 120C |
1 x | Battery LiPo TATTU 10000 mAh 5S 18,5V 15C |
1 x | Lipo TATTU 16000 mAh 6S 22.2v 30C XT-90 |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Size "M" motor holder for class 400 |
1 x | Rocket D3-P |
1 x | A60 Motor Mount Alu complete set |
1 x | Fan for A60 |
1 x | Bearings for motor HACKER C50 |
1 x | Receiver bed (Blue) |
1 x | Size "M" motor holder for class 600 |
1 x | Fiberglass motor-holder for electric motors |
1 x | Size "L" motor holder for class 600 |
1 x | Motor Mount for Multiplex FunJet |
1 x | Frontal support Speed 280 |
1 x | Motor holder for AC 28/7 |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | SERVO DES 707 BB MG |
1 x | SERVO DES 568 MG |
1 x | SERVO DES 658 BB MG |
1 x | SERVO DES 588 BB MG |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | SERVO DES 806 Pignons |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Receiver GRAUPNER GR-16 HoTT |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
2 x | Foam plastic plates (310x210x3 mm) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Foam plastic plates (310x210x5 mm) |
2 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | SC NAVY V15R |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | AXI 2826/6 V2 Long |
1 x | AXI 2212/12 V2 |
1 x | AXI 2826/10 V2 Long |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | AXI 2217/12 V2 |
1 x | AXI 2826/10 V2 |
1 x | AXI 2820/12 V2 Long |
|
40,560.21EUR |