1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | BALSA trip 5.0x5.0x1000 mm |
3 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
4 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
3 x | Pine wood slat 3.0x5.0x1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Trailing edge BALSA 35x8x1000 mm |
3 x | XH female balance (3S) connector (2 pcs) |
1 x | 30 cm DEANS female connector |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
3 x | BALSA trip 10x10x1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
3 x | Gold antispark 5,5 mm plug |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Connectors banna gold 5,5 mm (M/F) |
3 x | BALSA triangular 6x6x1000 mm |
1 x | XH male balance (3S) connector (2 pcs) |
2 x | Connectors DEANS 4 pins (1 pair) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | Ferrita con funda |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Gold antispark 4 mm plug |
3 x | BALSA trip 2.0x2.0x1000 mm |
4 x | Walnut wood slat 1.5x1.5x1000 mm |
5 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | 2 mm female connector (2 pcs) with safety connector |
3 x | Beech dowels 2.0 x 1000 mm |
1 x | Connectors banna oro 2 mm (M/F) |
2 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Optotronix Aurora Plug |
1 x | Conector Servo female 4 pines |
2 x | Ferrita 17x10x6.5 mm |
2 x | Connectors banna oro 8,0 mm (M/F) |
2 x | Liston HAYA 3 x 10 x 1000 mm |
3 x | Ferrita 27x14x7 mm |
3 x | XH female balance (2S) connector (2 pcs) |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
3 x | Ferrita 14x8x5.5 mm |
1 x | XH male balance (4S) connector (2 pcs) |
2 x | MPX Sub-D Adaptor |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | XH male balance (5S) connector (2 pcs) |
2 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Cable with accesories |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn with ball 55x40 |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Crimping tool |
1 x | Vacuum pump 12 CFM |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Dust collector for mould cleaning |
1 x | |
1 x | Z Bender - S Type Tool |
1 x | |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Hot Glue Stick GREEN |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | L-Connector 4.0 mm x 1000 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
2 x | Profile ABS half cane 2.0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Threaded coupler M3 (10 uds) |
1 x | 1000 ml sealer (DOPE) |
1 x | XH female balance (6S) connector (2 pcs) |
2 x | XH female balance (5S) connector (2 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
3 x | Connectors MPX black female |
2 x | Beech dowels 3.0 x 1000 mm |
3 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | 6 mm M3 variable inclined horn |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Long adjustable control horn 3x34 |
1 x | Horns indoor |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | IKARUS plane |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Servo GO-09 9g |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Rudder forward 80x28 "type Kato" |
1 x | 120x60 mm SLH KOVO wheel |
3 x | Hitec 30 mm servo rounded arm |
1 x | Futaba 30 mm servo rounded arm |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
2 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Gear for MICRO BB |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Small aluminium horn red (2pcs) |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Servo Dymond D 37 Eco |
1 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Servo TT ACE SHV 1504 MG |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | Short adjustable control horn 3x24 |
1 x | Connectors DEANS (T) |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Oratex Antik 2m |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | AXI 2826/10 V2 Long |
1 x | AXI 2820/12 V2 Long |
2 x | AXI 4120/14 V2 |
2 x | AXI 2826/6 V2 Long |
1 x | AXI 2808/24 V2 |
1 x | AXI 2826/8 V2 Long |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Extension 100 cm (Futaba) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Spinner propeller pleg. 45 mm / 5 mm |
1 x | Spinner propeller pleg. 38 mm / 4 mm |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Z Spinner (CN) 38mm |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
2 x | ABS angle 6,0x6,0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Conector JR Servo female (10 pcs) |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Connectors MPX female |
1 x | Oracover Black 10 m |
1 x | Oracover Green10 m |
1 x | Oracover White 10 m |
1 x | 50 mm white plastic spinner for fixed propeller |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | Oracover CARBON Metalic 1 m |
1 x | Connectors DEANS (T) micro |
2 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
1 x | Conector XT-30 (hembra) |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | MR30 connector female |
1 x | XH male balance (7S) connector (2 pcs) |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Connectors MPX female (PIN double) |
3 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Conector MR-60 (pareja) |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Conector JR Servo male (10 pcs) |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Conector JR Servo male (50 pcs) |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
2 x | MR30 connector male |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Conector MT-60 (pair) |
3 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | 42 mm white plastic spinner for fixed propeller |
2 x | Spinner plastic black fixed propeller 30 mm |
2 x | 50 mm black plastic spinner for fixed propeller |
1 x | Control horn long w/ball |
1 x | 10 mm Prop Adapter M12 |
1 x | L-shaped servo mount |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Chigre de amarre Scale 1:32 |
1 x | Catalog AERO-NAUT 2016 |
1 x | Spinner propeller pleg. 38 mm / 5 mm |
1 x | Housing Ø 11 mm (20 pcs) |
1 x | Z Spinner (CN) 32mm |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Ply-Span 450x600/13g Black |
1 x | AXI 2826/12 V2 |
1 x | AXI 5345/18 HD V2 SAILPLANE |
1 x | AXI 5325/16 V2 |
1 x | AXI2820/8 |
1 x | AXI 5325/18 V2 |
1 x | AXI 5345/18HD V2 3D Extreme KV171 |
1 x | AXI 5330/18 V2 |
1 x | AXI 5345/14 HD V2 |
1 x | AXI 5345/18 HD V2 |
1 x | Horn 5/20 with M2 Bearing |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Horn 5/15 with M2 Bearing |
1 x | Carbon plate 350x150x1.0 mm |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Wheel 28 mm |
1 x | 200 Newtons FEMA absorber |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Compact on-board starting system (9525) |
1 x | Wheel FEMA 90 mm / 6 mm |
2 x | 17 mm servo arm with ball link DES Graupner |
1 x | Brake for 140 mm wheels |
1 x | Wheel FEMA 152 mm / 8 mm |
2 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Wheel 18 mm |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Nose wheel 62 mm |
1 x | Hitec 38 mm servo arm |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Servo GO-02 Digital 1.8g |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Screwdriver for Torx® TX6 |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Ply-Span 450x600/13g White |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Ply-Span 450x600/13g Yellow |
1 x | AXI 4130/16 V2 |
1 x | AXI 5325/34 V2 |
1 x | AXI 2820/8 V2 Long |
1 x | AXI 4120/20 V2 |
1 x | AXI 2826/8 V2 |
1 x | AXI 5330/24 V2 |
1 x | AXI 5325/20 V2 |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Harness for transmitter JETI DUPLEX |
1 x | ESC RAY G2 R-60SB SBEC |
2 x | L-Connector 1.5 mm x 1000 mm |
1 x | MPX Support (2 pcs) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | MPX PCB "6 Pins", 5 pieces |
2 x | Mounting frame MPX female connector |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | XH LiPo extension lead |
2 x | A/C economy plywood 600x300x6+.0 mm |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Mounting frame MPX male connector |
1 x | MPX housing with flange (4 pcs) |
2 x | Kontronik connector (10 connectors, 5 pairs) |
2 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | F3A carbon 95 mm spinner |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Red 3m5 mm connector holder |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Connectors MPX black male |
1 x | MPX PCB "Gender-Changer (5 pcs) |
2 x | PIN Connector female (100 pcs) |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Falcon Carbon Spinner 82mm for electric motor |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | MPX screwable clips (4 pcs) |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | MPX Support |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | 36 mm red plastic spinner for fixed propeller |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | Spinner plastic red fixed propeller 30 mm |
|
11,037.21EUR |