3 x | Birch plywood plate 600x300x3.0 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
3 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Balsa panel 4.0x100x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
3 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Covered closure or fairings |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Cockpit plastic closing |
3 x | Round Rod 1,0x1000 mm |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | One touch canopy lock |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Round Rod 2,0x1000 mm |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Strip 2,0x2,0x330 mm |
1 x | Round Rod 2,5x1000 mm |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Strip 2,5x1,25x330 mm |
3 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
3 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
2 x | Canopy Latch |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
2 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
4 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn for flap control (1 pcs) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
3 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn with ball 40x30 |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
3 x | Small aluminium horn gold (2pcs) |
2 x | Horn with ball 55x40 |
2 x | 6 mm aluminium horn with patella |
1 x | 20 mm carbon horn |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Horn 5/15 with M2 Bearing |
1 x | Horn 6/35 with M3 Bearing |
1 x | Horn 6/27 with M3 Bearing |
3 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | RH long aluminium horn (2pcs) |
3 x | Horn 16,5x20 mm (2 pcs) |
4 x | Horn 13,5x16 mm (2 pcs) |
2 x | Horn 5/20 with M2 Bearing |
2 x | Cable with accesories |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Cable control set |
1 x | CC 01 |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
2 x | Round Rod 6,0x1000 mm |
2 x | Beech dowels 2.0 x 1000 mm |
3 x | 45 mm rods + T patellas set for direction control |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
4 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Suncover 100cc Red |
4 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Support Flush MPX Conector (6 pcs) |
2 x | Landing gear frontal support 25x32x16 |
3 x | Tip wing protector 28x10x12 (2 pcs) |
3 x | Allen wheel collar M4x6 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
3 x | Wheel collar 3.5 mm Ø (4 uds) |
3 x | Wheel collar 2 mm Ø (4 uds) |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | SUS wire 3m (nylon coated) |
2 x | Cap closure 33/23.5mm (2 uds) |
4 x | 5 mm M2 variable inclined horn |
2 x | Rudder forward 70x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Control horn long w/ball |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Horn mando long (2 pcs) |
3 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Horn mando small (2 pcs) |
3 x | Horns indoor |
2 x | Micro control horn T2 Ø 1 |
3 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Shirt Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | Cap Hispano Aviación |
1 x | AX-60 starters (5 pcs) |
1 x | Parachute expulsion foam |
1 x | White smoke canister 140 g |
1 x | Red smoke canister 140 g |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | EXTRA 330 LX 2.34m ARF (LX-09) Pilot |
1 x | EDGE 540 1.73m SEAGULL Model |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Motor OS 46 AX II |
1 x | Long horn 50x26 |
3 x | 6 mm M3 variable inclined horn |
2 x | 5 mm M2 variable horn |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Brass control horn M2 long for wire (10pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Horn DUBRO 1/2A |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
2 x | Brass control horn M4 long for wire (4 pcs) |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Micro control horn (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Extra long horn 60x30 |
2 x | 6 mm M3 variable horn |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
3 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Snap for floding prop for 2 mm axi |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Green smoke canister 140 g |
1 x | Smoke set "S" |
3 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Electric Landing Gear Trainer Jet Intro |
1 x | F-16 Scale 1:6 (1.630mm) |
2 x | Pushrod octagone 3/2 |
1 x | Snap long M2 (10 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Snap short M2 (10 uds) |
2 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Window mounting channel 5m |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
2 x | SkyMaxx 1.550 mm (kit) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
2 x | Tip wing protector 30x10 (2 pcs) |
2 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Bags de Luxe ODYSSEY |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
1 x | ASPIRE Red ARF 2.000 mm |
1 x | F9F COUGAR Grey ARF 1.562 mm |
1 x | Electric Landing Gear ASPIRE |
2 x | ASPIRE Navy ARF 2.000 mm |
1 x | Electric Landing Gear ODYSSEY |
2 x | F-16 Scale 1:6 Camuflaje Grey (1.630mm) |
1 x | Electric Landing Gear F9F COUGAR |
1 x | Support pumb/filter Xicoy X45 |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Support XT60 conector (2 pcs) |
1 x | Absorver mount set for 5-10 Kg models |
3 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Servo NARO Max Std |
1 x | Propeller MEJLIK 28.5x12 S-3 Blades |
1 x | Propeller MEJLIK 20x13 N-3 Blades |
1 x | Propeller MASTER 7x5 |
1 x | FIALA Propeller 18x8 |
1 x | FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Xplorer1 anemometro |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
1 x | CARBON CUB 15cc ARF 2280 mm |
2 x | Pushrod octagone 3/2 with coupler M2 |
1 x | 26x12 prop Super Silence |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | Propeller MEJLIK 24x10 TH |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | 11x7 tree blades propeller |
1 x | Propeller MASTER 6x4 |
1 x | Propeller POWER-PROP 15x10 |
1 x | 24x14 prop Super Silence |
1 x | Propeller MASTER 5,5x4,5 |
1 x | Propeller MASTER 7x3 |
1 x | 30x14 prop Super Silence |
1 x | 29x12 prop Super Silence |
1 x | Propeller MEJLIK 21x8 CFK |
1 x | Propeller MENZ-S 18x8 |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Propeller MEJLIK 27x12 TH |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Long adjustable control horn with bearing |
1 x | Short adjustable control horn 3x24 |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Tire ODYSSEY Ø 89mm |
1 x | Tank Kevlar ASPIRE 4 L Kero / 1.5 L Smoke |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 250 mm / 16 mm Airbrakes |
2 x | 140 mm rods + T patellas set for direction control |
2 x | Allen wheel collar M3x3 |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
3 x | 45 mm rods set for direction control |
2 x | 80 mm rods set for direction control |
1 x | Spinner 90 mm CFK |
1 x | Spinner 50 mm White (Kavan) |
1 x | MythoS 125E WHITE/BLUE (SebART) |
1 x | L-39 Albatros Scale 1:4.75 1991 mm |
1 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | Set Legs + Wheels with brake ASPIRE |
1 x | ASPIRE Red ARF 2.000 mm, Fuselage |
2 x | 100 mm rods + T patellas set for direction control |
2 x | 41x5,5 mm wires output (2 pcs) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 75 mm spinner (Carbon Imitation) |
1 x | ASPIRE Red ARF 2.000 mm, Set Alas |
2 x | Tank + hopper Kevlar ASPIRE 6 L Kero |
1 x | Bags wings/rudder ODYSSEY |
2 x | Tank + hopper Kevlar ASPIRE 4 L Kero / 1.5 L Smoke |
1 x | F-16 Falcon Black Knights 1:6 (1630 mm) |
1 x | F-4 Phantom Scale 1:7, Electric retract landing gear |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
2 x | 100 mm rods set for direction control |
1 x | Pushrod octagone 4/3 |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Pushrod greyline 4/3 with coupler M3 |
2 x | 28x5 mm wires output (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
2 x | Allen wheel collar M4x4 |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | 90 mm rods + T patellas set for direction control |
1 x | 140 mm rods set for direction control |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Spinner 115 mm GFK |
1 x | 3-Blade Spinner 70 x 70 mm GFK |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | Spinner plastic 63 mm Red 2Bl |
1 x | Spinner 104x131 mm 115 g CFK-BS |
1 x | Spinner 102 mm |
1 x | Spinner 80 mm GFK |
1 x | Spinner 100 mm GFK |
1 x | MythoS 125E YELLOW/BLACK (SebART) |
1 x | VOYAGER Sport Jet 110" - 2790 mmDeco Yellow/Black |
1 x | Pipa 3D F-16 Scale 1/6 |
|
46,667.11EUR |