1 x | Colador RABBIT |
1 x | Motor A2212/13T |
1 x | Jet Pipe 160N-250N (120/130 mm) |
1 x | Jet Pipe for ASPIRE 2m JMF |
3 x | Tailormade cone A-10 Skymaster |
1 x | BLUE Colored Liquid smoke for turbine 0.75 l |
2 x | Jet Pipe for A-10 Skymaster (set 2 pcs) |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | DLE 111 pipe plug |
2 x | Sparkplug DLE CM6 |
1 x | BALSA trip 10x10x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Allen wheel collar M3x5 |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | 80 mm rods set for direction control |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | 100 mm rods set for direction control |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 100 mm rods + T patellas set for direction control |
2 x | 45 mm rods + T patellas set for direction control |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | 28x5 mm wires output (2 pcs) |
1 x | 140 mm rods set for direction control |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Canopy Latch |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | 45 mm rods set for direction control |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | PowerFuel RX V2 Fuel Pump |
2 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Black large kwik link (10 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | KAVAN Hand crank fuel pump |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Electric Fuel Pump 12v |
1 x | JM electric Pump |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Variable Flow Smoke Pump System |
1 x | Angled clevis with threaded rod M3 |
1 x | Electric Fuel Pump 12V |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | BOEING 727, Jet pipe for Boeing 727 |
2 x | Brake controller for 28 and 36 mm Brakes |
1 x | BOEING 727, Retract set for Boeing 727 |
1 x | BOEING 727, Electric brake 28mm + controller |
1 x | BOEING 727 kit |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | ORACOVER Fluor red (2 m) |
1 x | Extension 15 cm (Futaba) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | 280 cc gasoline fuel tank complet |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | Z Bender - S Type Tool |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Propeller POWER-PROP 7x7 |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo |
2 x | EDF Ducted Fan JP Hobby 80mm + 6s Motor 2200KV (CCW) |
2 x | Tren electrico JP ER200 F-16 1:6 TOPRC |
1 x | Boomerang ELAN STARS & STRIPES Combo |
2 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | Controller Retract Box ER-200 V2 |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | Bags de Luxe ODYSSEY |
1 x | ASPIRE Navy ARF 2.000 mm |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | OPUS-V / Jet-CC-BF |
1 x | MPX Sub-D Adaptor |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | 90 mm rods + T patellas set for direction control |
1 x | wire tensioner (black) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Spark motor OS Type F |
2 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Bujia OS G5 gasolina |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
2 x | SSPS105 Super Hi-Power servo |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Spark motor OS nº 8 |
1 x | Allen wheel collar M4x6 |
1 x | Sparkplug ROSSI R8 |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Sparkplug 1/4-32 Glow |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | ESC ALPHA 60A HV |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Cockpit aluminium closing 4.7g |
1 x | Sparkplug NGK CM6 |
2 x | ULTIMATUM 2.0 m Red Bull |
1 x | Pushrod greyline 4/3 with coupler M3 |
2 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Pulley brass 10/2 (2 pcs) |
2 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
2 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
2 x | Wing Joiner BULL MØ1 2.600mm |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Ion Pro, Wing joiner (JP Model) |
2 x | Reductora IPS dual-motor 10,7:1 with spinner |
2 x | EDF Ducted Fan JP Hobby 120mm + 12s Motor 760KV (CW) |
1 x | Ion Pro, Elevator (JP Model) |
1 x | Avanti XS Jet , Tricolore Canopy |
1 x | Electric Landing Gear AVANTIA XS |
1 x | Antonov AN2 Scale 1/6 - 3m |
2 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
3 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
2 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | EDF Ducted Fan JP Hobby 90mm + 6s Motor 1750Kv (CW) |
2 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
1 x | Ion Pro, Fuselage (JP Model) |
2 x | Ion Pro, Canopy (JP Model) |
1 x | JP Hobby ER-120 Tricycle FELIX JR |
1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | Avanti XS Jet , Carrying bags (SebArt) |
1 x | Avanti XS Jet , Fuselage Stand (SebArt) |
2 x | Avanti S Jet , Carrying bags (SebArt) |
2 x | Avanti S Jet , Vectorial Exhaust for JetCat P-180 |
1 x | |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | VIPER JET G2 Esq. 2 Red/White/Silver |
1 x | Prop Holder AXI 41xx V2 |
1 x | Motor holder AXI |
1 x | Snap pin for micro clevis (10 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | ULTIMATUM 2.0 m orange/blue |
1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | Tank BULL MØ1 4L (CMJets) |
1 x | Servo NARO Max Std |
1 x | Hovercraft sailcloth |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | AXI 2826/8 V2 |
1 x | AXI 2814/20 V2 |
1 x | AXI 2826/10 V2 |
1 x | AXI 2217/12 V2 |
1 x | AXI 2826/8 V2 Long |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | AXI 2820/8 V2 Long |
1 x | 8 mm Adapter for AXI53xx |
1 x | Motor mount for 1 m models |
1 x | Motor holder for AC 28/7 |
1 x | Indoor motor holder |
1 x | |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Spark motor OS nº 3 |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Propeller APC 14x8.5 Electric Pusher |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | PS-050 TONEGAWA Servo |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Motor SAITO FG-61 TS |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Size "L" motor holder for class 600 |
1 x | Pipa BULL MØ1 2.600mm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
1 x | Avanti S Jet , Field folding model stand (SebArt) |
1 x | Avanti S Jet, Kerosene+Smoke Tank(SebART) |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW) |
|
47,681.60EUR |