2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | PCARD Wireless System |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | Cockpit plastic closing |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
2 x | White smoke bombs AX-18 (5 pcs) |
1 x | Green smoke canister 100 g |
1 x | Yellow smoke canister 140 g |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 3l Smoke oil |
1 x | Smoke set "M" |
1 x | Covered closure or fairings |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Parachutist |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Locking cable tie 4.6x203 (uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Smoke set "S" |
1 x | Cap closure 33/23.5mm (2 uds) |
3 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Green smoke canister 65 g |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | AX-60 starters (5 pcs) |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Electric rocket starters (6 pcs) |
2 x | Canopy Latch |
1 x | Parachute expulsion foam |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
3 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Red smoke canister 140 g |
1 x | One touch canopy lock |
1 x | "M" set |
1 x | "S" set for planes |
1 x | Cabin latch Fox MDM1 4m (pair) |
3 x | Locking cable tie 3.2x142 (uds) |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Remote electric ignition system |
3 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | White smoke bombs AX-60 (5 pcs) |
2 x | Smoke set "Glider" |
1 x | Red smoke bombs AX-60 (5 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Ferrita 14x8x5.5 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Horn 6/35 with M3 Bearing |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | USB HLS prog. interface |
3 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
3 x | Tip wing protector 30x10 (2 pcs) |
3 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
3 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
3 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
2 x | 38x4,5 mm wires output (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
2 x | Epoxy Resin L (2.5 Kg) |
3 x | Electric spoiler 250 mm (2 pcs) |
1 x | Yellow smoke canister 100 g |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Yellow smoke canister 65 g |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
2 x | Profile ABS Square 4 x 1000 mm |
2 x | Profile ABS half cane 4x1000 mm |
2 x | Profile ABS half cane 2.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | USBCOM 5i |
1 x | Cotton Flocks, bag/ 500 g |
2 x | MEKP Harderner 100 g |
2 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
3 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Cockpit metalic closing |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Cockpit latch closing I=10 mm |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Servo NARO Max Std |
3 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
3 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
3 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Tip wing protector 40x14 (2 pcs) |
3 x | Wheel collar 3.5 mm Ø (4 uds) |
2 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
3 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Window mounting channel 5m |
3 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Control for forward wheel (MINI) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
3 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
3 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Pushrod octagone 3/2 |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
3 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Cable tie mounts 4.3 (4 uds) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Wheel collar 4 mm Ø (4 uds) |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | PT 21x13 EL Propeller |
1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
2 x | 28x5 mm wires output (2 pcs) |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
3 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | White smoke canister 100 g |
1 x | Vasa model Catapult |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Rubber profile 10-2 mm 2M |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
2 x | Allen wheel collar M4x4 |
1 x | CC 11 Conector |
1 x | ESC ALPHA 60A HV |
2 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
2 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
2 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
2 x | resin-hardener package L-385 with hardener H-385 |
2 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | PS-050 TONEGAWA Servo |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Servo Dymond D 37 Eco |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Allen wheel collar M3x5 |
1 x | 6 mm aluminium horn with patella |
1 x | 80 mm rods set for direction control |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Snap pin for micro clevis (10 uds) |
2 x | Landing gear frontal support 29x26x13,5 |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Carbon plate 350x150x1.0 mm |
1 x | SSPS105 Super Hi-Power servo |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Gear for MICRO BB |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 45 mm rods set for direction control |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Mould Resin P 10 kg |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Gear for D 54 |
1 x | Gear for D 200 BX |
1 x | Landing gear frontal support 25x32x16 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Pushrod octagone 4/3 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Allen wheel collar M3x3 |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 140 mm rods set for direction control |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | Cable grommet 9.5 mm (4 uds) |
|
8,942.78EUR |