1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | Quicklock washer 3 mm (10 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
2 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Flat washer 4.3 mm (20 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Xplorer2 anemometro |
1 x | Xplorer1 anemometro |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Battery RX JETI LiIon RB 6200 7.2v |
2 x | PowerPack 2.5X2 PRO |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
2 x | Battery RX JETI LiIon RB 5200 7.2v |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Tow hook for tug |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
3 x | Sprung retractable undercarriage (Alfa model) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | TX 250 mW especial GOPRO |
1 x | Metal ring front FEMA |
3 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Cooler motor type 400 |
1 x | |
2 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Large flex hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | 25 mm reinforced hinge |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Carbon plate 350x150x2.5 mm |
2 x | PVC grid straight 290x185x0.32 mm |
2 x | Styrene plate 320x120x0.5 mm |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | 12 mm dogdrive props |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | OSD Telemetry sensor |
2 x | Futaba BLS152 - Upper Case |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
3 x | Retract undercarriage for gliders up to 2 Kg |
3 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Retract undercarriage |
1 x | Battery voltage telemetry |
2 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
2 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | FUTABA 6L + R3106 2.4GHz |
2 x | AIRSPEED SENSOR SBS01TAS |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
2 x | Charger FUTABA SQN30W12P-08 220v |
1 x | FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER |
1 x | Axle wheel with accesories |
1 x | Crystal TX 35.180 Ch 78 |
1 x | Micro Crystal RX 35.140 Ch 74 |
1 x | A50 Motor Mount Alu complete set |
1 x | Altimeter Altis V4 |
1 x | Micro Crystal RX 35.090 Ch 69 |
1 x | Propadapter for motor A50-V3 |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Xplorer3 anemometro |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | PPM Encoder Module |
1 x | Screwdriver for Torx® TX8 |
1 x | Micro Crystal RX 35.170 Ch 77 |
1 x | DUPLEX 2.4EX RC Switch |
1 x | Telemetry interface ALTIS 12 cm |
1 x | JETImodel Addcap 1640 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Altimeter Altis NAO |
1 x | Micro Crystal RX 35.100 Ch 70 |
1 x | Keypad ALTIS V4 |
1 x | Battery charging cable XT60 |
1 x | Landing gear strap small (4 uds) |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Propeller 9x7 SlowFlyer |
1 x | Battery FUTABA 18MZ |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Ciano KAVAN Super Thin 20g |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Ballast 700gr OPALE |
1 x | Axle for motor A20-S (3 uds) |
1 x | Screw M2.5x5 (10 pcs) |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Sandpaper file 13 mm |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | La Capitania di Venetia accesories |
1 x | Indoor landing gear set |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | Futaba 3010 - Gear Set |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Extender tip (6 pcs) |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Wing OXY 5,0 m2 |
1 x | LUCAS pilot ARTF |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Futaba Prop Module F14 |
1 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Adaptadores carga 6s JST-XH |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Microbalon filler for CA glues. Packaging bottle 20g |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | KAVAN Threadlocker - Blue 10ml |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | Ciano KAVAN Medium 20g |
1 x | Ciano KAVAN Thick 20g |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Debonder UN - CURE™ (30g) |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | Rubber Insert soft, 1 Pcs. |
1 x | Handle for PERMAGRIT lime |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Mini Lock Grips 2PCS |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Heli blades angle measurer |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | 55% silver electrodes (2 pcs) |
1 x | Kwik link unmount tool |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Precision wrench L100 mm |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Universal Filter |
1 x | Dremel PERMAGRIT 18 mm round lime |
|
15,670.21EUR |