1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 1/4 Pilot "Mike" |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Softshell Hispano Aviación |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Blind nut M6 (4 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Propeller CFK 17x13 |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | 1/6 Pilot "Tony" |
1 x | Conector BEC female (10 pcs) |
1 x | Profile ABS Square 2 x 1000 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Xplorer4 anemometro |
2 x | Motor DLE 430 cc - Paramotors |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Blind nut M5 (4 pcs) |
1 x | Balsa panel 5.0x100x1000 mm |
3 x | Extinguisher CO2 - 2 Kg |
1 x | Straightened threaded rod M2-1m |
2 x | Squared carbon wing joinner 5x5x220 mm |
2 x | ABS tube 16.0x14.0x1000 mm |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Conector JAPAN G2 Set 5 pares |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Aluminium wide washer M3 blue (4 pcs) |
2 x | Blue smoke canister 100 g |
2 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Extension 100 cm (Futaba) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Dean "T" - Futaba Adapter |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Smoke set "M" |
3 x | 100 mm rods set for direction control |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Servo NARO Max Std |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | Profile ABS half cane 2.5x1000 mm |
2 x | Windsock Ozone L -1200 mm |
1 x | Aluminium M2x12 mm screw (4 pcs) |
2 x | Extension silicon 100 cm (Futaba) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Cable coupler M2x66 (2 uds) |
2 x | Small pinned hinge (6 uds) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Blind nut M2 (10 pcs) |
1 x | 1/6 Pilot "Garry" |
1 x | Propeller RF CFK 14.5x14 |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Small aluminium horn red (2pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Ball link M3 (6 uds) |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Profile ABS half cane 4x1000 mm |
1 x | "M" set |
1 x | 1/12 Pilot "Fighter" |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
3 x | Gates hinge |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | 1/4 Pilot "Heidi" |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Field folding model stand |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Ball link M2,5 (10 pcs) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Tube Pitot to PIXHAWK |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Cable with accesories |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
3 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Smoke set "Glider" |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Strip ABS 2.0x3.0x1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | 30 cm DEANS female connector |
1 x | Ball link Aluminio M3 (2 pcs) |
2 x | 6 mm aluminium horn with patella |
2 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Medidor ángulos y/o incidencias |
2 x | 41x5,5 mm wires output (2 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Vasa model Catapult |
2 x | PPM Encoder Module |
2 x | Prolongador S-Bus JR/JR 10cm |
2 x | Long pinned hinge (6 uds) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Motor A2212/13T |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Para-RC Trike "RC-Bullix" |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Spinner NUT M10x1 |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Small aluminium horn gold (2pcs) |
1 x | Propeller CFK 11x8 |
1 x | Interface Jack Adapter IKARUS |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | 15 mm floating pad (30 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | Propeller CFK 14x7 |
2 x | 100 mm rods + T patellas set for direction control |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Extension silicon 75 cm (Futaba) |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | BEC 3A FOXY |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
3 x | ABS angle 1.5x1.5x1000 mm |
1 x | Small Crow DLE-170M |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Propeller CFK 12.75x13 |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Flap hinge (6 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | VALACH Motors VM 70 S1-4T |
1 x | Cabling for Fox MDM1 wings |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Parachute PV6 for F3J |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
3 x | Cable grommet Ø 5 mm (4 uds) |
1 x | MAX pilot ARTF |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Oracover Green10 m |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Propeller RF CFK 16x8,5 S |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Round Rod 4,0x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Cockpit aluminium closing |
1 x | Cabel charger transmitter GRAUPNER |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Extension silicon 25 cm (Futaba) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Propeller balancer |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
3 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Connector Sub-D 2+5 Male |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
3 x | Cockpit plastic closing |
2 x | Propeller CFK 12.5x7 |
1 x | Propeller CFK 15x7 |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Double conector with JR adapter and 200 mm extension |
2 x | Flap hinge 33x9 mm (6 pcs) |
2 x | ABS tube 3.0x1.0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
2 x | Cable grommet 9.5 mm (4 uds) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | 1/12 Pilot "Cougar" |
1 x | Angle measurer |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Round Rod 3,0x1000 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Round Rod 2,5x1000 mm |
2 x | Green smoke canister 140 g |
1 x | Propeller CFK 16x16 Wide |
1 x | Conector XT-30 (macho) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | M3 Maxi ball link (2 uds) |
2 x | PIX Hawk with accesories |
1 x | HBC 10035-3 32-Bit |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
2 x | Connectors DEANS (T) |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
2 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Remote electric ignition system |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Ferrita 14x8x5.5 mm |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Strip 2,0x2,0x330 mm |
2 x | Round Rod 2,0x1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | 1/6 Pilot "Cindy" |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
2 x | Round Rod 1,5x1000 mm |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Oratex Silver 2m |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | White smoke bombs AX-3 (10 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
3 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Propeller CFK 12X6 |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
2 x | Conector JR Servo female (10 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Xplorer1 anemometro |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
3 x | Locking cable tie 2.5x100 (uds) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Para-RC Mix |
1 x | Cap Hispano Aviación |
1 x | Propeller CFK 15x16 |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Propeller CFK 15x13 Slim |
3 x | Monokote BLANCO jet (1.8x0.65m) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Shirt Hispano Aviación |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
3 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Small aluminium horn blue (2pcs) |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
2 x | ABS 500 x 400 x 1 mm (white) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Ball link M3 (10 pcs) |
2 x | Small pinned hinge (12 uds) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | CM-3 |
1 x | 45 mm rods + T patellas set for direction control |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Propeller CFK 12.5x6.5 |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Ball link M2 (10 pcs) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | Large flex hinge (12 uds) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Propeller CFK 16x16 Slim |
2 x | 250 mm / 16 mm Airbrakes |
1 x | Extension silicon 50 cm (Graupner) |
2 x | Futaba Female 40 cm extension |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Conector JR Servo male (10 pcs) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Propeller CFK 18x19 |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Propeller CFK 14.5x10 Slim |
2 x | Micro flex hinge (12 uds) |
1 x | Lipo GENS Soaring 1300 mAh 2s 7.4v 30C |
1 x | Cable coupler M2 (10 uds) |
1 x | Vest clothes Hispano Aviación |
1 x | Balsa panel 10x100x1000 mm |
1 x | Futaba male 40 cm extension |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | RF9 Flight Simulator with Spektrum Controller |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Angle of incidence meter |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Slave-cable USB Easy Sim |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Control horn long w/ball |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Propeller RF CFK 13x7 |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Opale Rucksack |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Green smoke canister 100 g |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Propeller CFK 13x9 |
2 x | Strip 3,5x1,75x330 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Propeller balancer |
1 x | Spikes Band (5 m) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Black large kwik link (10 pcs) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | 1/10 Pilot "Jack" |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Pilot "Dick" Legends Series (Slimline) |
2 x | Connector CAN 15 |
2 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | SE Ring 200 mm (2 pcs) |
2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
2 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Electric rocket starters (6 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Circlick securite |
1 x | 3l Smoke oil |
1 x | Kwik link AL M4 con Clip (2 pcs) |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Blind nut M4 (4 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Profile ABS half cane 7.0x1000 mm |
1 x | 5 LiPo XH>EH adapter |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Cockpit metalic closing |
2 x | Oracover Black 2 m |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Circlick securite |
3 x | Parachutist |
1 x | DYNAMOMETER S-1580 |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Propeller CFK 15.5x10 |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Oracover CARBON Metalic 1 m |
1 x | Tape GFK 25 mm |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Stickers-digit for marking |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Canopy Latch |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | 15 mm reinforced hinge |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | Oracover Azul 2 m |
1 x | Connector Sub-D 2+5 Female |
1 x | Pilot "Goose" (Slimline) |
2 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
3 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | 6 mm ball link M3 (10 pcs) |
2 x | Clip mini fixing for wing (2 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Propeller CFK 15x13 |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Xoar Electric Beechwood Prop 16x7 |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Optical RPM Sensor |
1 x | CC 05 |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Long ball link M1.6 (6 uds) |
1 x | Oracover Orange 2 m |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Propeller CFK 23x12 |
3 x | Motor DLE 200cc Premium Muffler |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 20x200 mm battery rings |
1 x | Propeller CFK 16x17 |
1 x | Blue smoke canister 140 g |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Propeller CFK 14x8 |
1 x | Smoke set "S" |
2 x | LUCAS pilot ARTF |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | SE Ring 480 mm (2 pcs) |
1 x | 80 mm rods set for direction control |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
2 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
2 x | Parachute BACKUP X100 |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
3 x | Bag connector 2 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Extension silicon 25 cm (Graupner) |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Propeller CFK 14x6.5 |
1 x | CC 01 |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Rescue 1,8m2 / BackPack |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Short ball link M1.6 (6 uds) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Rubber profile 10-2 mm 2M |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Long ball link M2 (6 uds) |
1 x | Truck-trailer for gliders 720 x 285 mm |
3 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Motor DLE 200cc Std |
1 x | |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Windsock Ozone L - 700 mm |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Parachute expulsion foam |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Ferrita 17x10x6.5 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Parachute P4 |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Propeller CFK 18,5x12 |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Oracover Brown 2 m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
2 x | 90 mm rods + T patellas set for direction control |
1 x | Horn 6/35 with M3 Bearing |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | ABS tube 7.0x5.0x1000 mm |
2 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Piloto jet 130 mm |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Horn mando small (2 pcs) |
1 x | 3 LiPo XH>EH adapter |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Short ball link M2 (6 uds) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | AX-60 starters (5 pcs) |
3 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
4 x | Jeti Black cap |
1 x | Connectors banna oro 3 mm (M/F) |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Extra long horn 60x30 |
2 x | ABS angle 6,0x6,0x1000 mm |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Futaba Female 40 cm extension |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Black smoke bombs AX-60 (5 pcs) |
2 x | Allen wheel collar M4x4 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Field folding model stand SebArt |
1 x | Propeller RF CFK 13x6.5 |
2 x | Allen wheel collar M3x3 |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Propeller CFK 13x7.5 |
1 x | ABS tube 3.0x2.0x330 mm |
2 x | Aramid 50 daN 50 m |
1 x | SE Ring 400 mm (2 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Blind nut M6 (4 pcs) |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | 5 mm M2 variable inclined horn |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | Propeller CFK 18x17 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Strip 2,5x1,25x330 mm |
2 x | White smoke bombs AX-60 (5 pcs) |
2 x | Silent-blocks DLE 170M |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
3 x | Connectors banna oro 4 mm (M/F) |
2 x | ABS angle 10,0x10,0x1000 mm |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | BALSA trip 10x10x1000 mm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | 18 mm reinforced hinge |
1 x | Prop rubber XS set 4 pieces |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Conector FESTO M3 Quick 3mm 90º |
2 x | UHU Por 50ml/40g |
1 x | Switch for DS: Long 2 Position |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Red smoke canister 100 g |
1 x | Horn 5/20 with M2 Bearing |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Socket head ball link M3 (2 uds) |
1 x | Propeller CFK 18x16 |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Cable control set |
1 x | White smoke canister 140 g |
1 x | 1/6 Pilot "John" |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Balsa panel 2.5x100x1000 mm |
2 x | Paramotor BackPack XXS 2 |
3 x | 28x5 mm wires output (2 pcs) |
1 x | 20 mm carbon horn |
2 x | Conector JR Servo female (10 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
2 x | ABS 500 x 400 x 1,5 mm (white) |
2 x | Cable tie mounts 4.3 (4 uds) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | AX-60 starters (5 pcs) |
1 x | 4 LiPo XH>EH adapter |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Battery LiPo GENS 6000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Propeller CFK 14x8 Slim |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Propeller CFK 17x18 |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Round Rod 1,25x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | CC 03 |
2 x | Clip fixing for wing (2 pcs) |
2 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | ABS rectangular profile 10x5.0x1000 mm |
3 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
1 x | 1/12 Pilot "Langley" |
1 x | USBCOM 5i |
1 x | Propeller CFK 20x13 |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Horn with ball 55x40 |
1 x | M3 Maxi ball link (2 uds) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Indoor hinge with servo arm integraded |
2 x | Miniature brass strap hinge, 1 m |
1 x | Small flex hinge (12 uds) |
1 x | Robart Door Hinge (Pk2) |
1 x | Long pinned hinge (12 uds) |
1 x | Round flex hinge (12 uds) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | PC-21 2.880 mm SINGAPUR scheme |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | FELIX JR Yellow/Black 1750 mm |
1 x | MB339 Freece PNP 1790 mm |
1 x | PC-21 XXL 3.395 mm |
1 x | FELIX SportJet Yellow 2200 mm |
1 x | VIPER SL Gold PNP 2270 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Boeing (TX) T-7A RED HAWK |
1 x | PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | FELIX JR Red/Yellow 1750 mm |
2 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | MB339 CAMUFLAGE PNP 1790 mm |
2 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Piloto JET 1:3,5 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | BD-5J PNP |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | MB339 CANADA PNP 1790 mm |
2 x | Boeing (TX) T-7A Camo |
1 x | PC-21 2880 mm Spinner 5Blade red |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | FELIX SportJet Blue/Green 2200 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | PC-21 2880 mm Spinner 5Blade blue |
2 x | PC-21 2.880 mm RAAF Sheme |
1 x | Electric Landing Gear FELIX SporJet 2.200mm |
1 x | MB339 Saudi PNP |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | VIPER SL NAVY PNP 2270 mm |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
2 x | FELIX SportJet Blue 2200 mm |
1 x | PC-21 2.880 mm BLUE French Army Scheme |
2 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | PC-21 2.880 mm WHITE/RED |
1 x | BD-5J ARF+ |
1 x | VIPER SL Thunderbird PNP 2270 mm |
1 x | PC-21 XXL Bags |
1 x | Nose wheel 62 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | SAVOX SH 0254 servo |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Wheel 38 mm V2 |
1 x | Strip 1,5x1,5x330 mm |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | Round Rod 5,0x1000 mm |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Wheel 28 mm |
1 x | MultiLog Altimeter |
2 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel FEMA 70 mm / 5 mm |
2 x | Foam wheel Ø 38 mm (2 pcs) |
2 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Wheel FEMA 82 mm / 5 mm |
2 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Propeller hub spacer 8/5.5 |
1 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | ASK 21 6.5m + pylona |
1 x | Fox MDM 1 4000 mm Std. |
2 x | Fox 4000 mm (Airwold) |
1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Fox MDM 1 4000 mm DeLuxe |
2 x | DG-303 ACRO 3750 mm, canopy |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | ASH 31 6.08m Composite Hollow Molded |
2 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
1 x | Rafale C (Aero-naut) |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Freewing F-14 Tomcat Twin 80mm EDF PNP (Deluxe Edition) |
1 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
1 x | Premium servo extension 50cm |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | Extension 7.5 cm |
2 x | JM electric Pump |
3 x | KAVAN Hand crank fuel pump |
1 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
2 x | Pin hinge 39x20 mm (10 uds) |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Servo Tester |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | MPX screwable clips (5 pcs) |
3 x | Red 4 mm connector holder |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | Servo Connector Brackets (10 pcs) |
1 x | XT-60 connector (female) |
2 x | Turbo Timber Evolution 1.5m BNF |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Spinner INOVA 102 mm Black |
1 x | Paramotor Trike XL |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | MPX Support |
1 x | F3A carbon 95 mm spinner |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | DIVA cabin cruiser |
3 x | XT-30 connector (pair) |
1 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | XH LiPo extension lead |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
2 x | Remolcador "Jonny Hafenschlepper" |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Ballast 700gr OPALE |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
2 x | ALPHA 1000mm BL ARTR |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Wing OXY 5,0 m2 |
1 x | Spinner INOVA 45 mm White |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | Trike XL motor set (motor+esc+prop) |
2 x | F3A carbon 80 mm spinner for Spark EVO |
1 x | Protector Connector MPX (1 pair) |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | SPARK Switch 12v |
1 x | EWC6 40 cm wing connector |
2 x | |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Female connector for 20 pines AWG |
1 x | Three-position switched channel, short |
1 x | SPARK Switch 5.9v |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Selfstart electronic switch |
1 x | EWC3 40 cm wing connector |
1 x | Female connector for 12 pines AWG |
1 x | DPS Switch JR/JR |
2 x | Propeller POWER-PROP 13x9 Izda |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Male connector for 12 pines AWG |
1 x | FX three-position switched channel, long |
1 x | Female connector for 16 pines AWG |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Propeller APC 14x8.5 Electric Pusher |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Short Switch On/Off micro |
1 x | DPSI Ampere battery backer |
1 x | Male connector for 20 pines AWG |
1 x | Ignition bed V2 Red color |
1 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Spinner plastic white fixed propeller 42 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | TopFuel LiPo 20C-ECO-X 2400mAh 3S MTAG |
1 x | Lipo GENS 2200 mAh 2s 7.4v 20c Soaring |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Screws M1,6x6 Allen |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | 18m Fitting barb |
1 x | Premium servo extension 75cm |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
2 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | Round Rod 1.0x3.5 cm |
1 x | Xplorer3 anemometro |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
3 x | Fiberglass plate 350x150x1.0 mm |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Fod Guard 83x32 mm |
2 x | 1/12 Pilot "Tom" |
1 x | Support ECU Xicoy X-45 |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
3 x | Allen wheel collar M3x5 |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | CC 02 |
1 x | Oracover Azul Cielo 2 m |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
3 x | Short ball link M3 (6 uds) |
1 x | Conector Servo female 4 pines |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Extension MPX-MPX 20 cm |
1 x | XTorque CFK Servohebel 38 |
1 x | Futaba 30 mm servo rounded arm |
1 x | Smoke Oil Blue 5 l |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | PowerBox Smokepump |
1 x | Extension for LC-Display 50cm |
1 x | Futaba 2x20 mm servo double arm |
1 x | Adapter lead MPX/XT60 |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | External LED's (2 pcs) |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | Vertical mounting servo holder |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Support hands Issuer PROFI TX |
1 x | 51 mm INO spinner (carbon imitation) |
3 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
2 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | DC Small for MultiLog & UltraLight |
1 x | 800TVL CMOS camera for FPV |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Bag JETI Duplex |
1 x | PC-21 2880 mm Electric Landing Gear |
2 x | Switch for DC: Long 3 Position |
1 x | Bearings for motor HACKER C50 |
1 x | Tail boom brace LOGO 480 |
1 x | Motor mount M |
1 x | Size "M" motor holder for class 400 |
1 x | TMM 2512-3S heli |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | |
1 x | Size "M" motor holder for class 600 |
1 x | Motor holder for AC 28/7 |
1 x | Cooler motor type 400 |
2 x | Cooler motor type 150 |
1 x | Metalic motor holder for class 550-600 |
2 x | Frontal support Speed 280 |
1 x | LOGO 600 SX (kit) |
1 x | Size "M" motor holder for class 400 |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
2 x | A50 Motor Mount Alu complete set |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | VBar Control Touch, midnight black |
1 x | Central support Speed 600 |
1 x | Logo 400 SE VBar |
1 x | VIPER SL YELLOW PNP 2270 mm |
1 x | Smoke pump RCEXL |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Conector BEC male (10 pcs) |
1 x | Valvoline SynPower 2T, 1 Litre |
1 x | 140 mm rods set for direction control |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
2 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
2 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
2 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
2 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
2 x | Propeller 9x4,7 SlowFlyer |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
2 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
2 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
2 x | Propeller 3x3 |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
2 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | A30-M/L/XL Backmountset complete |
1 x | Canopy Sweet / Siesta |
2 x | Servo TOPMODEL DS9010 T |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Z Spinner (CN) 32mm |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | Pilatus PC-21 2100 mm RED/WHITE (SebArt) |
1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | 40 mm air cylinder |
2 x | Landing gear frontal support 25x32x16 |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Air pressure gauge |
2 x | Snap short M2 (10 uds) |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Body for landing gear Ø 4 mm |
1 x | Quick hose connector 3-3 mm |
2 x | Split pin 1.6x16 mm (10 uds) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Pilot Lotsenboot |
1 x | cable TexY |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Electric Fuel pump |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Electric Fuel Pump 12V |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | ESC YGE 205 HVT BEC |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Extension 5 lipos JST - JST/C |
1 x | Switching module high voltage SXH |
1 x | Carburetor DLE 20 |
1 x | Horn with ball 40x30 |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | DLE Ignition 170M |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Piston ring for DLE-30 |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Canister combo DLE 120 cc |
1 x | Hopper 125 ml INTAIRCO |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Adapter lead MPX/EC3 |
1 x | ORACOVER Fluor red (2 m) |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | 45 mm rods set for direction control |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Coupling for 4 mm axis |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | 12V Car Adapter |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | Blades 330mm |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Charging Extension 50cm for 2 Battery |
1 x | 100m servo "Premium" wire (white/red/blue) |
2 x | Servo GO-1013 MG 3.8kg |
1 x | Servo GO-1053 MG 20.0kg |
2 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | FOX 3000 mm ARF (FMS) |
1 x | Neck strap JETI DC |
1 x | switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | Telemetry interface ALTIS to Futaba |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 3 mm Prop Adapter M6 |
1 x | 30 cm MULTIPLEX female connector |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Servo GO-09 9g |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | USB programador GO servos |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Mounting Stickswitch |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | JETImodel DPS 40 |
1 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
1 x | Caps multicolor Switch JETI |
1 x | Switch for DS: Long 3 Position |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
1 x | Motor Moki S 250 cc 5 cyl with autostarter |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Super GALEB G-4 Camuflage ARF 1.751 mm |
1 x | Electric Landing Gear ODYSSEY |
1 x | ODYSSEY Red/White ARF 2190 mm |
1 x | FunCub NG verde RR |
1 x | BETA 1400 ARF Red |
1 x | DRACO 2.0m landing gear |
1 x | Snap long M2 (10 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Control for forward wheel (MINI) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Cornamusa 8 mm plastico (10 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | PowerBox VRegulador 5.3v |
1 x | wire tensioner (red) |
1 x | USB Interface Adapter |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | Swift 5050 mm (Airwold) |
1 x | VTX 477 Carbon Rotorblade |
1 x | |
1 x | Kobuz 5000 mm (Airwold) |
1 x | Moki Carburetor Throttle Arm with Extension |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | MOKI S250 Intake Bend |
1 x | Fiberglass motor-holder for electric motors |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Transmitter Stick Ends V3 Red - M3 (2 pcs) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Turbina KINGTECH K120 G4 |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | 18 mm wing servo holder |
1 x | 11 mm wing servo holder |
1 x | 13 mm wing servo holder |
1 x | 58 mm micro servo cover |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Strut Set SUPER GALEB G4 (without wheels) |
1 x | Set Wingjoiner carbon ASPIRE |
1 x | Trainer Jet Intro yellow/blue/navy |
1 x | ODYSSEY Porsche ARF 2190 mm |
1 x | Jet Pipe for ASPIRE 2m JMF |
1 x | ODYSSEY Blue FANTASY ARF 2190 mm |
1 x | ODYSSEY Yellow FANTASY ARF 2190 mm |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
1 x | Strut Set ASPIRE (without wheels) |
1 x | Electric Landing Gear ASPIRE |
1 x | Electric Landing Gear F9F COUGAR |
1 x | Strut Set HAWKER HUNTER 1:5,8 (without wheels) |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | BULLIT Wing 840 mm |
1 x | JOKER 3 1550mm |
1 x | ROBIN S50E BLUE/WHITE |
1 x | DRACO 2.0m BNF |
1 x | DRACO 2.0m Helice 14.5x9 4-Blade |
1 x | WINGO 2 PNP |
1 x | CESSNA 50E White/Blue |
1 x | BULLIT Wing 1095 mm |
1 x | FunCup XL RR |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | DRACO 2.0m PNP |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | FunCub NG azul RR |
1 x | WINGO 2 ARF |
2 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Lead with adhesive (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Cooler motor type 280 |
1 x | Snap for floding prop for 2 mm axi |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | Propeller MENZ-S 22x10 |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Rocket D3-P |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Propeller 3x2 |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
1 x | Electric Fuel Pump 12v |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | SUS wire 3m (nylon coated) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Window mounting channel 5m |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
|
187,582.41EUR |