4 x | Silicone red 4,0 qmm wire ( 1 m) |
2 x | Silicone red 1,5 qmm wire ( 25 m) |
4 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
3 x | 1/7 Pilot "Japanese" |
3 x | Silicone red 2,5 qmm wire ( 1 m) |
5 x | MPX-Dean "T" Adapter |
9 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
3 x | Cinta Goldfix 1m |
2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
4 x | 4 LiPo XH>EH adapter |
4 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
4 x | 1/6 Pilot "John" |
8 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Silicone black 4,0 qmm wire (25 m) |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
6 x | SE Ring 200 mm (2 pcs) |
4 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Cable set PREMIUM , fuselage/wing one4one |
5 x | 1/12 Pilot "Cougar" |
4 x | Civilian pilot "G-Man" size 9cm (Slimline) |
4 x | SE Ring 330 mm (4 pcs) |
12 x | BEC 3A FOXY |
6 x | APM2.6 Power module with 5.3V DC BEC |
6 x | SE Ring 400 mm (2 pcs) |
5 x | 1/12 Pilot "Langley" |
4 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
7 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Silicone black 6,0 qmm wire (25 m) |
5 x | TP/TopFuel - XH 2/3S Adapter |
3 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
3 x | Silicone red 6,0 qmm wire ( 1 m) |
6 x | UBEC 6A KAVAN |
4 x | SE Ring 350 mm (2 pcs) |
3 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
6 x | TrainerCord (master-learner) |
4 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
4 x | Tape GFK 25 mm |
5 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Protective open Cover for wires Ø 13 mm 1000 mm |
16 x | CC 02 |
8 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
5 x | 1/10 Pilot "Jimmy" |
8 x | Cabel charger transmitter GRAUPNER |
5 x | 20x200 mm battery rings |
3 x | Silicone black 2,5 qmm wire ( 1 m) |
4 x | Protective Cover for wires Ø 6 mm 1000 mm |
4 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
5 x | 20x1000 mm Ring Strap Back To Back |
3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
5 x | Pilot "Adolf" Legends Series (Slimline) |
3 x | Silicone black 1,5 qmm wire ( 25 m) |
5 x | Civilian pilot "Pamela" size 9cm (Slimline) |
4 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
2 x | Ball Link Plier |
3 x | Dust collector for mould cleaning |
6 x | Green silicone 0,25 qmm wire (50 m) |
4 x | Green silicone 0,25 mm² wire (25 m) |
3 x | Hot Glue Stick GREEN |
4 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
4 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
6 x | PVC 0,08 qmm Futaba servos wire (5 m) |
3 x | PVC 0,08 qmm Graupner servos wire (5 m) |
6 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
9 x | Black copper lacquer wire Ø0,2 mm (5 m) |
4 x | Silicone red 0,25 mm² wire (25 m) |
4 x | 2,0x50 mm allen screwdriver |
4 x | 5 LiPo XH>EH adapter |
4 x | White silicone 0,25 qmm wire (100 m) |
8 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
3 x | 2,5x60 mm allen screwdriver |
3 x | PVC 0,14 qmm servos wire Graupner (100 m) |
4 x | Fresa corte diamante Ø 1.4mm (bola) |
3 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
7 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Blue smoke canister 100 g |
5 x | Protective Cover for wires Ø 10 mm 1000 mm |
3 x | Cable Cargador FUTABA |
2 x | X-RAY Micro QR |
2 x | Plasti Dip Liquid Tape 429 ml black |
3 x | Starter Sullivan-STAR 601 |
2 x | ABS Strip 1.5x6.0x1000 mm |
2 x | Hot Glue Stick BLACK |
3 x | Red smoke canister 140 g |
3 x | Red smoke bombs AX-60 (5 pcs) |
1 x | 1/6 Pilot "Tony" |
2 x | Cannon 53/6 mm |
4 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Gracia (Top Model) |
3 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Strip ABS 2.0x5.0x1000 mm |
3 x | Black silicone 0,25 mm² wire (25 m) |
2 x | Smoke set "S" |
3 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
3 x | BALSA triangular 10x10x1000 mm |
5 x | A/C quality beech plywood 600x300x0.6 mm |
4 x | Beech dowels 4.0 x 1000 mm |
4 x | Ferrita 17x10x6.5 mm |
4 x | BALSA trip 4.0x4.0x1000 mm |
1 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
3 x | A/C quality beech plywood 600x300x0.8 mm |
3 x | Balsa panel 2.0x100x1000 mm |
2 x | Birch plywood plate 600x300x4.0 mm |
6 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Ferrita 14x8x5.5 mm |
3 x | Balsa panel 5.0x100x1000 mm |
2 x | Balsa panel 10x100x1000 mm |
2 x | Birch plywood plate 600x300x3.0 mm |
4 x | Balsa panel 1.5x100x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | Silencer Ring 7-35 |
1 x | EVOLUTION 10 GX gasoline motor |
2 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Balsa panel 2.5x100x1000 mm |
5 x | Ferrita con funda |
3 x | BALSA trip 5.0x5.0x1000 mm |
4 x | Balsa panel 3.0x100x1000 mm |
3 x | Balsa panel 1.0x100x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
4 x | Beech dowels 2.0 x 1000 mm |
3 x | BALSA trip 3.0x3.0x1000 mm |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
5 x | BALSA triangular 15x15x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Extension silicon 30 cm male (Futaba) |
2 x | White smoke bombs AX-3 (10 pcs) |
1 x | MOKI S250 Intake Bend |
3 x | Painting GHT Lexan Black 150 ml |
2 x | ABS I Strip 10x5x1000 mm |
3 x | Paint gun for sprays |
1 x | XH male balance (4S) connector (2 pcs) |
2 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
3 x | Ferrita 27x14x7 mm |
3 x | 20 g tin paste |
2 x | Connector Sub-D 2+5 Female |
2 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
2 x | Motor EME 35 cc |
4 x | 1/12 Pilot "Fighter" |
4 x | X-RAY Micro QR (Tail Tube) |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
8 x | 30 cm BEC cable (male) |
1 x | Gracia Maxi ARF, bags (Top Model) |
4 x | Pilot "Goose" (Slimline) |
5 x | Cabel "Y" 30 cm (graupner) |
3 x | XH male balance (6S) connector (2 pcs) |
2 x | 33,0 mm propeller (left propeller) |
4 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Spray EC Red 400ml |
2 x | MG cannon 1.8 cm (5 pcs) |
1 x | MZ-10, 5 Channel HoTT |
5 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
2 x | X-RAY Micro QR (Rudder) |
2 x | 30 cm MULTIPLEX female connector |
2 x | External LED's (2 pcs) |
2 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
3 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Motor DLE 55 cc |
4 x | Extension silicon 100 cm (Graupner) |
3 x | Pine wood slat 10x10x1000 mm |
3 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | VALACH VM 85 B2-FS |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | 2 piece mounting frame |
3 x | Solvent Plasti Dip 1000 ml |
3 x | AX-60 starters (5 pcs) |
4 x | Futaba Female 40 cm extension |
1 x | ABS Strip 1.0x2.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
5 x | Epoxy QUIK-CURE™ 5 min (260g) |
2 x | 1,5x50 mm allen screwdriver |
1 x | Power Box GPS Sensor III |
2 x | Round Rod 1,0x1000 mm |
3 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Blade holder lower |
3 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
5 x | Hexagonal ball head 2.0 x 50 mm |
1 x | XH female balance (4S) connector (2 pcs) |
2 x | Vacuum pump P1-N |
1 x | Round Rod 4,0x1000 mm |
1 x | Surprise XII Rudder (Freudenthaler) |
2 x | Glider IKARUS |
3 x | 1,2x1000 mm 2:1 red termoretract tube |
4 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Q-12 2000 mm Electric |
4 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Motor DLE 20 cc |
2 x | 1,6x1000 mm 2:1 black termoretract tube |
4 x | Electric rocket starters (6 pcs) |
3 x | 2,4x1000 mm 2:1 red termoretract tube |
2 x | Hobbylite Filler, Balsa colour |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Ventral support for AX-18/AX-60 |
2 x | Servo FUTABA BLS 276SV |
3 x | Bag connector 2 mm |
4 x | Balsa panel 4.0x100x1000 mm |
1 x | Extension 5 lipos JST/C - JST |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | X-RAY Micro QR (Elevator) |
4 x | Extension silicon 30 cm female (Futaba) |
2 x | Moki Pushrod S250 (1 pcs) |
1 x | Round Rod 1,25x1000 mm |
2 x | Spannlack 1000 ml |
5 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | 2 piece mounting frame |
2 x | Parachute expulsion foam |
1 x | Selfstarr EME35 |
2 x | Rangefinder 39x20 mm (2 pcs) |
1 x | OLED-Display for PowerBox Mercury SRS |
2 x | Strip 3,5x1,75x330 mm |
1 x | Green smoke canister 100 g |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | PowerBox Evo |
2 x | 500 ml sealer (DOPE) |
1 x | Round Rod 2,0x1000 mm |
4 x | Multi-adapter balancer JST - TP |
2 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Strip ABS 2.0x3.0x1000 mm |
2 x | Ancla Hist. 67 mm (2 uds) |
3 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Cylinder EME 35 cc |
1 x | 10 mm gas motor standoff |
2 x | Extension 100 cm (Futaba) |
3 x | Circlick securite |
1 x | Canister combo DLE 55 cc |
4 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | XH male balance (5S) connector (2 pcs) |
1 x | Moki Carburetor Throttle Arm with Extension |
2 x | Digital scale up to 40 kg |
1 x | Piston EME 35cc |
1 x | Crimping tool |
1 x | 18 mm wing servo holder |
1 x | Canopy Astra |
1 x | Swashplate metal LAMA |
1 x | Shaft sleeve LAMA |
2 x | |
2 x | Cut tube |
1 x | Blades 330mm |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | Propeller hub spacer 8/5.5 |
1 x | PowerBUS Lead 60 cm |
2 x | GPS V2 Sensor for M-LINK receivers |
2 x | Ball Link Plier |
1 x | LiPo Storage Box Type "BIG" |
2 x | AXI 2217/12 V2 |
2 x | Glases Flitemaster |
3 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Glidder Mü13e (Bergfalke) |
1 x | Escape Moki 100 BVT |
1 x | Red 4 mm connector holder |
3 x | BABY glider (Aero-naut) |
2 x | Spray Graphit 33 |
3 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | AXI 2808/24 V2 |
1 x | Round Rod 3,0x1000 mm |
2 x | ORACOVER Ferrari red (2 m) |
2 x | EXTRA 300L 1.2 m Blue |
1 x | E-FUN BUG (ROI-Import) |
1 x | AXI 2814/10 V2 Long |
2 x | FESTO connector 1/8 Quick 6mm 90º |
2 x | SensorSwitch, red connector wit 200cm ribbon cable |
2 x | Spark Plug BRISK M14x1.25 |
5 x | Dremel PERMAGRIT thin lime |
2 x | Strip 1,5x1,5x330 mm |
1 x | Connectors MPX male (PIN double) |
1 x | AXI 2820/14 V2 Long |
1 x | AXI 2217/20 V2 |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
2 x | 5 line servos wire black (1 m) |
2 x | Anchor 25 mm (2 uds) |
3 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Moki Exhaust Bend 200 mm |
1 x | Yellow smoke canister 65 g |
1 x | Charging Extension 50cm for 2 Battery |
1 x | Motor wall |
2 x | Digital precision scale up to 2000 g |
2 x | XH female balance (9S) connector (2 pcs) |
1 x | PowerBox iGyro 3xtra |
2 x | Extension silicon 10 cm (Futaba) |
1 x | Green smoke canister 65 g |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | 20x15 Falcon electric V2 |
1 x | KIRA 400-34 |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
2 x | XH male balance (8S) connector (2 pcs) |
4 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Screws M1,6x6 Allen |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Balls 4 mm |
2 x | Mounting base Ms 8 mm |
2 x | Angle of incidence meter |
3 x | Silicone black 4,0 qmm wire ( 1 m) |
2 x | Screw M3x16 |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Pump 12 V |
2 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | ODYSSEY Navy ARF 2.190mmSet Alas |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
2 x | Flybar support metal LAMA |
3 x | 2,4x1000 mm 2:1 green termoretract tube |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Q-12 X-light 2000 mm Electric |
1 x | 42,0 mm propeller (left propeller) |
1 x | Head lower part New |
3 x | Round Rod 2,5x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
3 x | Civilian pilot "Joe" size 9cm (Slimline) |
8 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | AXI 2826/10 V2 |
1 x | Motor EME 70 cc with autostarter |
2 x | White smoke canister 65 g |
4 x | 1/4 Pilot "Mike" |
3 x | Presto SF Light Filler styrene-free (420 g) |
1 x | AXI 2826/6 V2 |
1 x | MZ-18, 9 Channel HoTT |
1 x | Fournier RF-4D |
4 x | 1/10 Pilot "Jack" |
1 x | Strip 2,5x1,25x330 mm |
2 x | Smoke set "Glider" |
2 x | Z Bender - S Type Tool |
1 x | Battery plate |
3 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Piloto Jet "Green" 1/6 Scale |
1 x | 36,0 mm propeller (rigth propeller) |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Micro clevis (10 uds) |
2 x | Copier 5x20 cm pcs |
2 x | Futaba male 40 cm extension |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Smoke Oil Blue 5 l |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Air filter MOKI |
2 x | Blade holder metal LAMA |
1 x | Ventus 2cx 4.5 m Winglets |
1 x | Head lower part |
1 x | KIRA 600-24 6,7:1 |
1 x | Battery Protection Circuit Board 22.2v 6s |
2 x | "S" set for boats |
1 x | Boat 140 mm |
4 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | AXI2820/8 |
1 x | PowerBox MagSensor red connector |
1 x | AXI 5320/28 V2 |
3 x | Astra (Top Model) |
2 x | Oracover CARBON Metalic 1 m |
1 x | Miss ULTIMATE 50E Red/Black |
1 x | Motor Moki 100 BVT |
1 x | Piston pin for DA-60 DA-120 |
2 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | X-RAY Micro QR (Fuselage with canopy) |
2 x | Parachutist |
1 x | AXI 2820/12 V2 |
1 x | Motor MOKI S 250 cc 7-cylindrer |
3 x | Yellow smoke canister 100 g |
1 x | Blue smoke canister 140 g |
1 x | Filter KingTech |
2 x | Compact on-board starting system (9713) |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
4 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Gasket intake manifold - cylinder for ZG 74B/ZG 80G |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | 1000 ml sealer (DOPE) |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Piston ring EME 35cc |
1 x | Bearing 3x6x2,5 |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
3 x | Extension silicon 100 cm (Futaba) |
1 x | Recess mount-rem. glow plug set |
2 x | Conector FUTABA Servo female (10 pcs) |
1 x | Logo 400 SE VBar |
1 x | AXI 2820/10 V2 |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | KIRA 600-30 6,7:1 |
2 x | XH male balance (2S) connector (2 pcs) |
1 x | AXI 2814/12 V2 |
3 x | Extension silicon 25 cm (Futaba) |
2 x | Digital weight, angle and balance meter BASIC |
1 x | A40 Backmountset complete |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | 55% silver electrodes (2 pcs) |
2 x | SPARK Switch 12v |
4 x | Ring 320 mm length (5 pcs) |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
2 x | Protector Connector Dean-T (1 pair) |
2 x | DYNAMOMETER S-1580 |
1 x | GRAFAS MAXI ARF |
3 x | White smoke bombs AX-60 (5 pcs) |
3 x | Extension silicon 50 cm (Graupner) |
2 x | Washer 2.2×4 |
2 x | Motor A20-20 L EVO |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Pitts S1 - V2 1500 mm (Phoneix Model) |
2 x | Oracover Azul Cielo 2 m |
1 x | Motor Moki S 300 cc 5 cylinders |
3 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
2 x | White smoke canister 140 g |
2 x | KONDOR 15-92 |
3 x | White smoke canister 100 g |
2 x | Tube bender |
1 x | Spinner 105 mm CFK |
1 x | PowerBox ROYAL SRS |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
2 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Motor A30-14 M V2 6 Poles |
4 x | SE Ring 250 mm (2 pcs) |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
4 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
2 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | EXTRA 330L 35% hardware pack (Precision Aerobatics) |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | AXI 5325/20 V2 |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Tail boom |
1 x | Nut M1,6 |
2 x | PYRO 700-56L |
2 x | Molinete / Cabestrante amarre Scale 1:32 |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Stainless Steel Bend D 20x0,6mm |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Sparkplug cap red, with spring ZG26SC, ZG26SCM and ZG231SLH |
3 x | Futaba Female 40 cm extension |
1 x | Pick up EME 55/60 cc |
1 x | Motor B50-10L Competition + 6,7:1 |
1 x | PowerBUS Lead 200 cm |
2 x | EDGE 540-A 105" (2660 mm) |
2 x | KIRA 480-34 5,2:1 |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | T-Motor U7-V2.0 Kv420 |
3 x | Protective Cover for wires Ø 20 mm 1000 mm |
2 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
1 x | Plug cap with spring for ZG 38/S/SC |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
3 x | USB Interface Adapter |
1 x | AXI 2820/14 V2 |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Dia. 16x35 mm PTFE tube for escape |
1 x | Gracia Maxi ARF (Top Model) |
3 x | Initior Receiver FRX2 Wireless |
1 x | Arnes cruzado Confort de Luxe PROFI |
1 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
1 x | Cylinder ZG 26SC/SLH |
1 x | Landing gear retract neumatic (Jet Legend) |
3 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
2 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
1 x | Motor A20-20 L EVO |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Stainless Steel Mini Pipe for Titan ZG 20 and ZG 23 |
2 x | ULTRA STICK 30 cc ARF |
1 x | Carburator Moki S400 |
1 x | Electric Landing Gear ODYSSEY |
1 x | KIRA 480-34 |
1 x | XH LiPo extension lead |
1 x | AXI 2814/10 V2 |
2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Cylinder Gasket set for DA-60 / DA-120 |
2 x | Motor B20-18 L + 4:1 gearbox |
2 x | Multi-adapter balancer JST/C - TP |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
3 x | PowerPack 2.5X2 PRO |
1 x | Spark plug capZG 20/ZG 26EI with HT lead |
1 x | KatanaS 50E, Wings WHITE/RED (SebART) |
2 x | Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA |
2 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Castrol Oil TTS 1l |
1 x | Motor ST 7-160 B |
1 x | Motor A2212/13T |
3 x | Silicone red 1,5 qmm wire ( 1 m) |
3 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
1 x | Ball bearing middle DA-50/DA60/VM120B2 |
1 x | PowerBox Smokepump |
1 x | Interruptor On/Off Corto micro |
2 x | PYRO 600-12 |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61 |
2 x | Starter EM Gear Power 250 |
4 x | 6 mm Quick clamp_S (10 pcs) |
2 x | Universal Colour Paste deep black 250 g |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | PIN Connector female (100 pcs) |
1 x | AXI 5320/18 V2 |
1 x | AXI 2808/20 V2 Long |
2 x | OPUS-V / Jet-CC-BF |
1 x | |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
2 x | Conector JR Servo male (10 pcs) |
5 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Motor DA 120 |
4 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | T-shape holder metal LAMA |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | A50 Backmountset complete V3/V4 |
1 x | 4 blades set |
6 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 10 mm portholes (10 pcs) |
1 x | Spring Clip 28 mm teflon tube |
1 x | Head runner |
1 x | 7 mm gas motor standoff |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
3 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Oracover Azul 2 m |
5 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Kontronik ProgUnit |
6 x | "Y" charging 4mm wire (2 IN-1 OUT). |
4 x | PSC 5 |
2 x | Conector Servo female 4 pines |
3 x | Wing OXY 5,0 m2 |
3 x | Pilot "Anthony" (Slimline) |
3 x | 1/6 Pilot "Cindy" |
3 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
2 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
2 x | Connectors banna oro 3 mm (M/F) |
3 x | CC 05 |
1 x | Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace) |
3 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
4 x | Opale Rucksack |
2 x | Straightened threaded rod M2-1m |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
4 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
3 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Connectors DEANS (T) |
1 x | Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace) |
2 x | "M" set |
1 x | EC-Cutter |
2 x | Profile ABS Square 2 x 1000 mm |
4 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Partall paste 650 g |
1 x | Fuel line plugs (Black) |
2 x | Silicone black 0,75 qmm wire ( 25 m) |
3 x | Profile ABS half cane 2.5x1000 mm |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
3 x | Towing hook |
2 x | PCARD Wireless System |
6 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Intairco CMB Super Filter - 6mm Barb |
1 x | ABS tube 4.0x3.0x1000 mm |
2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
4 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
4 x | Tape GFK 50 mm |
3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
2 x | Potenciometro micro |
2 x | 12,7x1000 mm 2:1 green termoretract tube |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
2 x | Battery LiPo GENS 7000 mAh 4S 14.8v 50C (Gens Ace) |
2 x | Ventus 1:4 set of instruments |
2 x | Horn with ball 55x40 |
3 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | JetiBOX |
1 x | Extension silicon 35 cm (Futaba) |
4 x | Long pinned hinge (12 uds) |
2 x | Heat Seal Iron |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
3 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Blind nut M2 (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
2 x | Vacuum bag, 1200 mm x 50 m |
1 x | TopFuel LiPo 25C-ECO-X 900mAh 2S |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Motor DLE 170 M- Paramotors |
2 x | Truck-trailer for gliders 720 x 239 mm |
4 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Cable tie mounts 4.3 (4 uds) |
2 x | Red smoke canister 65 g |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Horn 5/15 with M2 Bearing |
1 x | Jeti Box mini |
2 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
3 x | USB interface ALTIS |
3 x | JETImodel SINGLE BEC |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Round flex hinge (12 uds) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Large flex hinge (12 uds) |
1 x | Universal batery Tester |
1 x | 20 mm carbon horn |
1 x | Bags wings/rudder ODYSSEY |
3 x | SE Ring 450 mm (2 pcs) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Fuel line plugs (Red) |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | 25 mm Sandpaper file |
3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Blind nut M5 (4 pcs) |
3 x | Gates hinge |
1 x | Universal Colour Paste white 50 g |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Short ball link M2 (6 uds) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | Brass control horn M4 short for wire (10pcs) |
2 x | Cable coupler M2 (10 uds) |
1 x | Allen wheel collar M4x6 |
1 x | Quicklock washer 3.5 mm (10 pcs) |
2 x | Glases Innovation Plus |
2 x | U Profile ABS 2,0x4,0x1000 mm |
3 x | Allen wheel collar M3x5 |
3 x | SE Ring 300 mm (2 pcs) |
2 x | Micro flex hinge (12 uds) |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | Hardener Aero EPH 161 (500 g) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
3 x | M2,5 5Diam short black ball link V2 (2 pcs) |
2 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
2 x | Epoxy 5 min. 500 g (Resin) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Propeller balancer |
2 x | Optotronix Aurora Plug |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Hacker X-Pro USB interface V2 |
2 x | Silicone black 0,75 qmm cable ( 1 m) |
3 x | Piloto Jet "Red" 1/6 Scale |
1 x | Big Crow DLE-170M |
1 x | Red smoke canister 100 g |
2 x | Para-RC Mix |
1 x | Epoxy 40 min (Hardener). 10Kg |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Oratex Natural White 2m |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | AX-60 starters (5 pcs) |
1 x | 10 mm Quick clamp_L (6 pcs) |
2 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Horn 6/20 with M3 Bearing |
1 x | Long ball link M1.6 (6 uds) |
2 x | White silicone 0,25 mm² wire (25 m) |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Glases Nimbus "Black" |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
3 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
5 x | USB HLS prog. interface |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
4 x | White silicone 0,25 qmm wire (150 m) |
1 x | PPM Encoder Module |
2 x | Pilot "Duke" Legends Series (Slimline) |
8 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 30 cm DEANS female connector |
2 x | Xplorer4 anemometro |
4 x | 3 LiPo XH>EH adapter |
2 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 100g Flux Paste for Silver Solder |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | White large kwik link (10 pcs) |
2 x | Allen wheel collar M4x4 |
1 x | MPX Sub-D Adaptor |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace) |
3 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Metal clevis M3 (10 uds) |
3 x | Tape GFK 38 mm |
2 x | 18 mm reinforced hinge |
1 x | DYMOND VTX UBS Programming adapter |
2 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Glases Aspen |
8 x | CC 01 |
1 x | Vasa model Catapult |
3 x | Pilot JAN 1/4 Saiplanes |
1 x | Pendulun "Special" to tank 75g |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
7 x | 2 LiPo XH>EH adapter |
2 x | Sealing Iron Sleeve STD |
1 x | Fuel line plugs (Silver) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Tube Pitot to PIXHAWK |
2 x | Jeti Black cap |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Cylynder DLE 20-RA |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
2 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Interruptor RX/Batterie |
1 x | Motor EME 35 cc with electric starter |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Nitroverdu 500 ml |
1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
3 x | Cross Connector 4.0 mm x 1000 mm |
2 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | Fuel line plugs (Blue) |
1 x | Lock washer 4.3 mm (20 pcs) |
6 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Cockpit aluminium closing |
1 x | ABS tube 5.0x4.0x1000 mm |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Piston ring for DLE-20 RA |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Silicone red 4,0 qmm wire (25 m) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Canopy Latch |
2 x | Extension silicon 75 cm (Futaba) |
2 x | M3 Maxi ball link (2 uds) |
2 x | 1/12 Pilot "Tom" |
3 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Cable coupler M2x66 (2 uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
5 x | USB Mini Camera endoscope |
3 x | Ball link M3 RPA's-UAV's |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | XT-60 connector (male) |
1 x | RH long aluminium horn (2pcs) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Cabel "Y" 30 cm (Futaba) |
2 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Hand Pads for Tray JETI |
1 x | Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace) |
1 x | ABS tube 2.0x1.0x1000 mm |
2 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | MYLAR film A350 (1000x500 mm) |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | Para-RC Trike "RC-Bullix" |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Remolcador "Jonny Hafenschlepper" |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
3 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | Long ball link M3 (6 uds) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Metal ball clevis M3 (10 uds) |
3 x | 1/6 Pilot "Garry" |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace) |
1 x | TopFuel LiPo 20C-ECO-X 4500mAh 3S |
2 x | Electric spoiler 250 mm (2 pcs) |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Silicone red 0,5 qmm wire ( 25 m) |
1 x | Gear set HITEC HS-311/322/325BB |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Glases Stratus |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Rubber profile 8-2 mm 2M |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case) |
2 x | Xplorer1 anemometro |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | 6 mm M3 variable horn |
1 x | Small aluminium horn blue (2pcs) |
1 x | Propeller APC 12x4.5 MR |
2 x | ABS angle 6,0x6,0x1000 mm |
4 x | Small pinned hinge (12 uds) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Sheave Pl. 1R. 5 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Small Crow DLE-170M |
1 x | XT-60 connector (female) |
1 x | Adjustable launching hook |
2 x | Short ball link M3 (6 uds) |
2 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
4 x | Dean "T" - Futaba Adapter |
2 x | ABS tube 9.0x8.0x1000 mm |
3 x | Male/Female prolonguer for Balancer Thunder Power 6S |
2 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Aramid 50 daN 50 m |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Aluminium M2x12 mm screw (4 pcs) |
4 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Oracover Red 2 m |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Parachute P4 |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
2 x | ABS angle 1.5x1.5x1000 mm |
2 x | Couple M4 for wire (10 pcs) |
3 x | Motor OS 3820-1200 electric |
2 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Propeller APC 12x4.5 MR Electric Pusher |
2 x | Extension silicon 10 cm (Graupner) |
2 x | Silicone red 6,0 qmm wire (25 m) |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | Small aluminium horn red (2pcs) |
1 x | Silicone red 1,0 qmm wire (100 m) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Motor DLE 430 cc - Paramotors |
1 x | Conector BEC male (10 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Epoxy 5 min. 500 g (Hardener) |
2 x | Long ball link M2 (6 uds) |
4 x | 30 cm BEC cable (female) |
3 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | CM-3 |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Spray adhesive AEROFIX 2 |
1 x | Micro clevis (10 uds) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Fixed launching hook |
1 x | Tow hook for tug |
1 x | Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace) |
1 x | Glases Ace |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
3 x | Male Prolonger TP 4/5S |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
2 x | T-Connector 4.0 mm x 1000 mm |
2 x | Socket head ball link M3 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
2 x | Horn 5/10 with M2 Bearing |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Oracover Yellow CUB 2 m |
2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Threaded coupler M2 (10 uds) |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Metal clevis M2,5 (10 uds) |
2 x | Heli blades angle measurer |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | TopFuel LiPo 35C-POWER-X 2400mAh 2S |
2 x | Long pinned hinge (6 uds) |
2 x | Female connector JST SH 1.0mm with 10 cm wire |
2 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
2 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | ACTIVE ARF Electric 1.995 mm |
3 x | Marker ties (20 pcs) |
1 x | Para-RC "RC-Evo-Cross" Rescue |
3 x | Indoor hinge with servo arm integraded |
1 x | TopFuel LiPo 20C-ECO-X 5800mAh 4S |
1 x | 12 mm floating pad (49 pcs) |
1 x | Spikes Band (5 m) |
2 x | Blind nut M6 (4 pcs) |
1 x | TopFuel LiPo 35C-X 5000mAh 6S |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
2 x | Angle measurer |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | 80 mm rods set for direction control |
1 x | Blind nut M4 (4 pcs) |
1 x | Universal Filter |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Sheave Pl. 2R. 12 mm |
2 x | Connector CAN 15 |
2 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Silicone black 1,0 qmm wire (100 m) |
2 x | Sanyo RX Battery Eneloop 4,8 V JR |
2 x | ABS tube 14.0x10.0x1000 mm |
2 x | LightBox SR |
3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | ABS tube 8.0x7.0x1000 mm |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Cabling for Fox MDM1 wings |
1 x | Monokote BLANCO jet (1.8x0.65m) |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace) |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Manual Controller |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Green smoke canister 140 g |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Receiver FUTABA R7014SB FASST Test |
2 x | Cable coupler M2 (10 uds) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | M3 Maxi ball link (2 uds) |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Jeti Advance Plus Program Card |
3 x | Connector Sub-D 2+5 Male |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
2 x | Xplorer3 anemometro |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Bags de Luxe ODYSSEY |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | PIX Hawk with accesories |
2 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | Copier 2x20 cm pcs |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Rubber profile 6-2 mm 2M |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
3 x | Socket head ball link M3 (2 uds) |
2 x | Small flex hinge (12 uds) |
2 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Windsock Ozone L -1200 mm |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Optical RPM Sensor |
2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
3 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Cable with accesories |
1 x | Clip fixing for wing (2 pcs) |
1 x | Conector BEC female (10 pcs) |
1 x | Short adjustable control horn 3x24 |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Gold antispark 4 mm plug |
2 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
3 x | Flap hinge (6 pcs) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Buy Perforated film 100 cm / 20 m |
2 x | Oracover Verde 2 m |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
3 x | SIMtransmitter 6 Mode 2 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Silicone red 2,5 qmm wire ( 25 m) |
2 x | ABS angle 10,0x10,0x1000 mm |
2 x | PVC 0,14 qmm servo wire Futaba (5 m) |
2 x | Ball link M2,5 (10 pcs) |
1 x | BIG MOSNTER |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Fox 4000 mm with flaps (Airwold) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
3 x | Surface Indicator Gauge Small |
2 x | 1/6 Pilot "Buddy" |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Ball link M2 (10 pcs) |
2 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | Oracover Brown 2 m |
2 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | MAX pilot ARTF |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Dean-T Plug Mold |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | MEKP Harderner 100 g |
1 x | Gold antispark 5,5 mm plug |
2 x | Covered closure or fairings |
1 x | PROFI Box JETI |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace) |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | Lipo GENS Soaring 3300 mAh 2s 7.4v 30C |
1 x | Colador RABBIT |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
2 x | Control horn long w/ball |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | COPILOT Multiplex |
1 x | Cable coupler M3 (10 uds) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Turbine KingTech K30G Restart |
1 x | Westland Lysander 50cc ARTF |
2 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Connectors DEANS (T) micro |
3 x | Joint with bearing M2 22x5,5 |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
2 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | TopFuel LiPo 25C-ECO-X 1300mAh 2S |
2 x | M2,5 Diam metal short ball link V3 (2 pcs) |
3 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Rescue 1,8m2 / BackPack |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Oracover Black 2 m |
3 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
2 x | Adjustable brass horn threaded M3 |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Oracover Yellow CADMIO 2 m |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | 3l Smoke oil |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Black large kwik link (10 pcs) |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Hot Glue Stick RED |
5 x | CC 03 |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
2 x | Horn for flap control (1 pcs) |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Sheave Pl. 1R. 3 mm |
2 x | Male connector JST SH 1.0mm with 10 cm wire |
2 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Allen wheel collar M3x3 |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Sandpaper file 13 mm |
1 x | Metal clevis M2 (10 uds) |
1 x | 12x8 tree blades propeller |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
3 x | Me-163 |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | Handle for PERMAGRIT lime |
2 x | Extension silicon 50 cm (Futaba) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | SUS wire 3m (nylon coated) |
3 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
2 x | Extension 2/3 lipos JST/C |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
4 x | Gates hinge aluminium (1 pcs) |
2 x | DPS Switch JR/JR |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | SUPER DIMONA TC-80 |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
3 x | PSC 6 |
1 x | LiPo TopFuel ECO-X 3800mAh 2s 20C MTAG |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
3 x | M3 Maxi ball link (2 uds) |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
2 x | 6 mm aluminium horn with patella |
1 x | Cable grommet Ø 5 mm (4 uds) |
4 x | Towing hook |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | 1/4 Pilot "Heidi" |
2 x | Straightened threaded rod M3 - 1m |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Telemetry interface ALTIS to Futaba |
2 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | 140 mm rods set for direction control |
1 x | Conector JR Servo female (10 pcs) |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | 5 mm M2 variable horn |
1 x | Vacuum pump 12 CFM |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Stickers-digit for marking |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | DINO Glider ARC |
2 x | Adaptador equilibrador HITEC (XH) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Glass fabric 25 g (2 m²) |
2 x | Servo FUTABA S 9670 SV |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Blind nut M8 (10 pcs) |
1 x | Medidor ángulos y/o incidencias |
1 x | Battery LiPo GENS 5800 mAh 4S1P 14,8V 45C (Gens Ace) |
2 x | Parachute PV6 for F3J |
1 x | Small aluminium horn gold (2pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | Windsock Ozone L - 700 mm |
1 x | |
1 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
2 x | wing/fuselage connector for 16 pines AWG 20-24 |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Joint with bearing M2,5 22x5,5 |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Flat washer 1.7 mm (20 pcs) |
2 x | Cockpit metalic closing |
1 x | M3 black washers (4 pcs) |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Steering arm 12 mm Ø 4 mm |
2 x | Brass control horn M2 long for wire (10pcs) |
1 x | Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | 100 mm rods set for direction control |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
4 x | Trike XL motor set (motor+esc+prop) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
3 x | ABS "T" angle 2.0x2.0x1000 mm |
3 x | Pin hinge 26x11 mm (10 uds) |
3 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | White smoke bombs AX-9 (10 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
2 x | LUCAS pilot ARTF |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | OS 40-FG 4T Motor |
1 x | USB Adaptor OPTronics |
1 x | GPS Sensor + Logger OPTronics |
1 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
2 x | Pin hinge 39x20 mm (10 uds) |
1 x | Mini Lock Grips 2PCS |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
2 x | Red aluminium servo arm V3-Futaba 1,0inch |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Rudder 2_Tray 3.5~4 inch |
3 x | Precision wrench L100 mm |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
2 x | Concave-Convex sandpaper file 13 mm |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
2 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
3 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Rubber Insert soft, 1 Pcs. |
2 x | Servo Mount S (red) |
1 x | Heli digital angle measurer |
1 x | Small pinned hinge (6 uds) |
1 x | Heli blades angle measurer |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | BABY glider drawings (Aero-naut) |
2 x | Red aluminium servo arm V3-Futaba 3,5inch |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Glider KNIRPS |
2 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Glider STROLCH |
2 x | Pin hinge 34x16 mm (10 uds) |
2 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Sealing Iron Sleeve PROF |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Mudguard for 140/165 mm wheels |
2 x | Goma arrancador Ø36 mm x 30 mm |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Servo Mount M (blue) |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
4 x | Servo Arm aluminium ALU-STAR |
2 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | "S" set for planes |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
3 x | Simulador RealFlight RF-9.5 S (sin emisora) |
2 x | GameCommander USB Universal |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
2 x | Cable set Premium™ MAXI "one4two" |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Short ball link M1.6 (6 uds) |
2 x | SERVO HOLDER |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
2 x | Extension MPX-MPX 20 cm |
2 x | EasyFLY Addon |
2 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
3 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Futaba 2x20 mm servo double arm |
2 x | Field folding model stand |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | KIRA 600-20 |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Horizontal mounting servo holder |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Cockpit latch closing I=10 mm |
1 x | Propeller balancer |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | KIRA 600-20 6,7:1 |
1 x | Hitec 46 mm servo arm with ball link |
1 x | KIRA 600-17 |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Futaba 38 mm servo arm |
1 x | Field folding model stand SebArt |
1 x | KIRA 500-26 6,7:1 |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Hitec 20 mm servo arm |
1 x | PYRO 750-50L |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Futaba 25 mm servo arm with ball link |
1 x | PYRO 700-45 |
1 x | KIRA 500-30 6,7:1 |
1 x | XTorque CFK Servohebel 38 |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | Cockpit aluminium closing 4.7g |
1 x | KIRA 480-43 5,2:1 |
1 x | Cable coupler M3 (10 uds) |
2 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Glases Nimbus |
2 x | PWC4 wing/fuselage connector for 4 servos |
2 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Oratex Silver 2m |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
3 x | PowerBox SparkSwitch RS |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | ASH 31 6.08m Composite Hollow Molded |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Carbon blade 3D 230 mm |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | Futaba Radio Case |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
3 x | SBEC Jeti |
1 x | Carbon blade 230 mm |
1 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
1 x | LASER 73" 1.85m (05) PILOT |
6 x | Opto Gas Engine Kill Switch |
1 x | Decorative caps, multicoloured, short |
1 x | Futaba Neckstrap |
1 x | Switch Cap M (blue) |
2 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Neck strap Double V2 |
1 x | Switch Cap L (black) |
1 x | Propeller APC 14x8.5 Electric Pusher |
1 x | LO 100 ARC 3.3m |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Red 3m5 mm connector holder |
1 x | Receiver bed (Blue) |
1 x | Switch Cap L (silver) |
2 x | Transmitter Balancer Futaba T-10CG |
2 x | Xplorer2 anemometro |
1 x | Ply-Span 450x600/13g Red |
1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
1 x | Bidule 170 ARF 3.48 m |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
2 x | Futaba BLS152 - Upper Case |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Oracover Yellow CADMIO 10 m |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Challenger ARF (Top Model) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Oracover Green10 m |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | Retract undercarriage for gliders up to 2 Kg |
2 x | 200m servo "Premium" wire (white/red/blue) |
2 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Chopped glass fibre strands 3 mm |
1 x | Servo FUTABA BLS172 SV |
2 x | Servo FUTABA SBL 471 SV |
1 x | Foil for sticking flaps and ailerons |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
2 x | Retract undercarriage |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
2 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | SERVO S9177SV HV S-Bus2 Programable |
2 x | Servo FUTABA BLS173 SV |
1 x | Oracover White 10 m |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Avia spare blue cockpit (Top Model) |
2 x | White gelcoat 1 Kg |
1 x | Servo FUTABA BLS 272SV |
2 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
2 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
2 x | Chopped glass fibre strands 0.2 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
2 x | 2.3 mm Adapter for 30 mm spinners |
2 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
2 x | MB-339 Aerofoam G2 "Italian Air Force Camu" |
2 x | BALSA triangular 8x8x1000 mm |
3 x | Mini AVANTI S EDF 80MM RTF |
2 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Rudder forward 90x28 "type Kato" |
1 x | 3 mm Prop Adapter M6 |
2 x | Canopy F9F Panther (Aero-naut) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | 5 mm M2 variable inclined horn |
2 x | Micro control horn (2 pcs) |
2 x | Stick coupler Ms 15 mm |
4 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | 3,2 mm Prop Adapter M6 |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
2 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Aero-Master (Aero-naut) |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | 2,3 mm Prop Adapter M6 |
2 x | de Havilland Vampire (Rc Factory) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | 4 mm Prop Adapter M6 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Freewing F-14 Tomcat Twin 80mm EDF PNP (Deluxe Edition) |
1 x | Dumper propeller 6/8 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Aero-Master Cabine (Aero-naut) |
2 x | Mig-29 "FULCRUM" (RBC Kits) |
2 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
2 x | Rudder forward 80x28 "type Kato" |
1 x | SCHARNHORST Battleship 1:200 |
1 x | 6 mm M3 variable inclined horn |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Long horn 50x26 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
2 x | F-104 Starfighter USAF (SebArt) |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | BALSA triangular 6x6x1000 mm |
2 x | 4 mm Prop Adapter CN-Spinner |
2 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
2 x | MIG 29 EDF |
1 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | Anchor 80 mm (2 uds) |
1 x | Ancla metal 40 mm (2 uds) |
1 x | Gear for D 54 |
1 x | Gear for MICRO BB |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Flat Connector 4.0 mm x 1000 mm |
2 x | Servo DITEX TD2612S |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Coupling bush 5 - 5 mm |
1 x | Joint for loading boom 2 pairs, 10 x 5 mm |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Liferaft 47 mm |
1 x | Anchor 25 mm (2 uds) |
1 x | Mounting base Ms 12 mm |
1 x | Anchor 50 mm (2 uds) |
1 x | Ancla 40 x 24 mm (2 pcs) |
2 x | Ancla Admiralsanker 60 mm (2pcs) |
1 x | Ancla 16 mm (2 pcs) |
1 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | Gear for D 200 BX |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Servo DITEX EL0510M |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | Anchor of tow Met. 60 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | 16mm Gear-Spotlight, 4W |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Lense for Spotlights, 20mm |
1 x | La Capitania di Venetia accesories |
1 x | Servo Dymond D 37 Eco |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
2 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Antenna Hole Cap V1 (Silver) |
2 x | Professional Servo tester |
3 x | Servo inverter |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Compact on-board starting system (9724) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Tailwheel for F3A size |
1 x | |
1 x | Propeller MASTER 7x4 |
1 x | 10-15mm Servo Arm |
2 x | Adapter lead MPX/EC3 |
2 x | Extension 5 lipos JST/C |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Propeller MEJLIK 18x8 CFK |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | 3-blades 27x12 carbon prop Super Silence |
4 x | Adapter lead MPX/XT60 |
1 x | Propeller APC 10x3,8 SF |
3 x | Axle for motor A30-XL V2 |
1 x | Propeller MENZ-S 16x8 |
4 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | LiPo TopFuel Power-X 4000 mAh 2s 35C MTAG |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Smoke set "M" |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Battery LiPo TATTU 70000 mAh 6S 22.2V 25C |
1 x | Fiberglass motor-holder for electric motors |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
2 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A |
1 x | |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | ZG231cc SHL |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Rubber profile 10-2 mm 2M |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Ball link M3 (10 pcs) |
2 x | 15 mm reinforced hinge |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
2 x | Blue Aluminium lock nut M2 (4 pcs) |
3 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | FunCup XL RR |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | FIALA Propeller 24x12 |
1 x | 700 ml complete glow fuel tank |
1 x | FIALA Propeller 16x6 |
1 x | Loctite HYSOL 9462 |
1 x | ALPHA 1000mm BL ARTR |
1 x | Pipa BULL MØ1 2.600mm |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Servo GO-1053 MG 20.0kg |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | FESTO Filter 6 mm |
1 x | Quick hose connector 4-3 mm |
2 x | Ball link M3 (6 uds) |
2 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
1 x | T-Hose connector 3-3-3 mm |
1 x | MPX plug mold V1 |
2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Propeller diller 5/6,3/8/9 |
2 x | T-Hose connector 3-3-3 mm |
2 x | Futaba S-Bus Rx/Gyro Link Lead |
2 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Racor 2/3 mm |
1 x | FESTO connector M7 Quick 4mm 90º |
2 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
2 x | Jet Pipe for ULTIMATUM 2m |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | FESTO connector M7 Quick 6 mm |
3 x | Servo Controller Fibra optica |
2 x | Kwik link unmount tool |
1 x | FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | FESTO connector M5 Quick 4 mm |
2 x | JSM U/C Leg Springs for XCALIBUR (Pr) (6-12Kg) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
2 x | Rafale C (Aero-naut) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
2 x | Extension 5 lipos JST - JST/C |
2 x | LA-7 Electric Landing gear complet (CY model) |
2 x | BULLIT Wing 840 mm |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Fokker D-VIII 2090 mm R/W (CY model) |
2 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | SCANNER 46-55 Sport Scale 1:7 ARF |
1 x | Cessna 310 Red #G-BBBX 3200 mm (CY MODEL) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Bucker Bu-133 Jungmeister #1 2540 mm ( CY Model) |
2 x | SkyMaxx 1.550 mm (kit) |
1 x | Cessna 310 3200mm Electric Landing gear complet (CY model),< |
2 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Compact on-board starting system (9512) |
1 x | Starter EM Gear Power 80 |
2 x | RCEXL Electronic ignition twin A-02 |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | Ancla Met. 16 mm (5 pcs) |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | ESC YGE 205 HVT BEC |
1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
1 x | ASPIRE Navy ARF 2.000 mm |
1 x | SIG Coverall 1.2x4.5 m |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | NF-1 RC set |
2 x | NF-3X-350 set |
3 x | Jet Afterburner Simulator NF-Jet3 YSW |
2 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | Motor Mega AC CAR 10 PRO |
1 x | Compact on-board starting system (9715) |
1 x | Aluminium ignition bad (red) |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
2 x | Ballast 700gr OPALE |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Spinner NUT M6 |
1 x | Z-shaped servo mount |
1 x | ABS angle 3,0x3,0x1000 mm |
2 x | SPS 70V 140/280 A |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
2 x | Shaft for A60-L V4 |
2 x | Shaft for A60-20/22/24S (120 mm) |
2 x | Avanti S 1.8m Jet RED Style |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Lock nut M3 (10 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Lock nut aluminium M3 (4 pcs) |
3 x | Avanti S 1.8m Jet White/Blue + Landing gear |
1 x | ODYSSEY Horns Set GFK |
1 x | Canopy Sweet / Siesta |
1 x | Railing 5x100 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | SIG Coverall 1.2x0.9 m |
2 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | F-16 Falcon Black Knights 1:6 (1630 mm) |
1 x | Focke Wulf FW-190A-8 93" (2362 mm) |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Bandera Frankr 4x6 |
1 x | Adaptador USB - YGE |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Solarfilm Lite blue transp. 5m |
1 x | F4U CORSAIR 2360 mm |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | PROFICOVER 5m |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | ESC YGE 120 LVK |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Doppelpoller 17 mm (6 uds) |
1 x | Lancha salvavidas Kutter .Ösen 43 mm (5 pcs) |
1 x | Eje barco 450x4 mm M4 |
1 x | Horn mando long (2 pcs) |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Dingi Pl. 26 mm (5 pcs) |
2 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | 3 mm Leader (L 100 mm) |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | MIG 29 3D RTF Red Start SET + Gyro |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | 12x6 tree blades propeller |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Brass wire 0.30 mm (25 m) |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Motor Mega AC 22/20/03 |
2 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Motor Mega AC 16/15/03 |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | ESC Ripmax QUANTUM 80A SBEC |
2 x | Propeller FOXY 34x12 2-Bl |
1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
1 x | JETI Counter for DC-16 (Blue) |
1 x | Program Card G2 RAY |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | Propeller G-Sonic 20x8 |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Miniature brass strap hinge, 1 m |
3 x | E_brakes electronics |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
1 x | Servo GO-09 9g |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | USB programador GO servos |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | DJI FPV Combo |
1 x | VIPER JET G2 Esq. 2 White/Red |
1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
1 x | VIPER JET G2 Esq. 2 Red/White/Silver |
2 x | XCALIBUR Fuel Tank with built in UAT |
1 x | DC Small for MultiLog & UltraLight |
1 x | JETImodel Addcap 1640 |
1 x | L-39 Albatros 138"/3.5m lenght ARF |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | Slave-cable USB Easy Sim |
2 x | Motor A30-12 XL Glider |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | DJI Mavic Air Fly More Combo |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | SAVOX SH 0254 servo |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
2 x | Skyray (RBC Kits) |
3 x | Avanti S 1.8m Jet White/Blue |
2 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | Compact on-board starting system (9525) |
1 x | Super DECATHLON Red 2.450mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Motor Mega AC 16/20/02 |
1 x | Motor Mega AC 22/30/02 |
1 x | Motor Mega AC 16/25/02 |
1 x | Motor Mega AC 16/15/04 |
1 x | NF-3X-80 liner Kit |
1 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Cooler motor type 150 |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Sparkplug ROSSI R8 |
1 x | Motor A30-10 XL V4 |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Motor A40-10S V4 14-Pole |
1 x | EWC3 40 cm wing connector |
2 x | SBEC 30 D |
1 x | MAX BEC 2D plus EX |
2 x | SPS 70V 100/200 A |
1 x | Selfstart electronic switch |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | SBEC 40 |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Top light 6mm/3V Red (2 pcs) |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | Strut M 1:50 2D (30 pcs) |
1 x | Pile railing 2D/16 mm (10 pcs) |
2 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | 50N turbine start protection tube |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Interface Realflight Simulator |
1 x | Interface Jack Adapter IKARUS |
1 x | Electronic switch JETI SP06 Opto |
2 x | MAX BEC 2 |
1 x | Female connector for 10 pines AWG |
1 x | Female connector for 20 pines AWG |
1 x | F8F Bearcat #201 2.460 mm |
1 x | Magnetic Interruptor MULTIPLEX |
2 x | EWC6 40 cm wing connector |
1 x | BULLIT Wing 1095 mm |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | NIEUPORT XXIV ARF 1780 mm |
1 x | P-47 Red (CY model) |
1 x | P-47B Razorback WA7 2.440 mm (CY model) |
1 x | Stinson Reliant White 2550 mm |
1 x | Tire ODYSSEY Ø 89mm |
1 x | ASPIRE Red ARF 2.000 mm, Fuselage |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Release film 100 cm x 50 m |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
2 x | Motor Mega AC 22/45/02 E |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
2 x | Motor Mega AC 16/07/12 |
1 x | Motor Mega AC 16/07/04 |
1 x | Motor Mega AC 16/07/08 |
1 x | Motor Mega AC 16/15/08 |
2 x | Mega Motor RC 400 F5J 1950KV |
1 x | Motor Mega AC 16/15/02 |
1 x | Motor Mega AC 16/25/04 COMBAT |
2 x | Motor Mega AC 16/25/04 |
1 x | Motor Mega AC 22/30/03 |
1 x | Motor Mega AC 16/35/01 |
1 x | Motor Mega AC 16/25/06 |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Steel Screw M1x8 (10 pcs) |
2 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Propeller 8x4 Electric |
1 x | Propeller 3x2 |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | 76 mm light wheels (2 pcs) |
1 x | Propeller 3x3 |
1 x | Cooler motor type 400 |
1 x | Shaft for A60-L (140mm) |
1 x | Tailwheel for 1-3 kg models |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Motor A30-14 L V4 |
1 x | Backmountset complete A40 |
1 x | Motor B50-14 S |
1 x | A50 Backmountset complete |
1 x | Bearings for motors hacker A50 |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Support conector MPX (6 pcs) |
1 x | Motor A50-12 L Glider |
1 x | Motor B40-10 L |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Fiberglass plate 350x150x0.3 mm |
2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Motor A20-22 L EVO |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Motor A10-7 L 4,4:1 |
1 x | Female connector for 6 pines AWG |
1 x | A30-M/L/XL Backmountset complete |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | UHU Por 50ml/40g |
1 x | Axle for motor A20-S (3 uds) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Motor A50-16 S V4 |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | MAX BEC |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
2 x | SPS Remote switch actuator |
1 x | EWC3 100 cm wing connector |
1 x | Pins M connect Multipin connectors AWG 20-24 |
2 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | SWTU2 switch |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Three-position switched channel, short |
1 x | Extension 2/3 lipos JST - JST/C |
2 x | Switching module high voltage SXH |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | Opto Gas Engine Kill Switch |
1 x | DPSI magnetic switch actuator (housing) |
2 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Battery charging cable XT60 |
1 x | Interruptor SPS 70v 60/120A |
1 x | Switc electronic 30 Amp |
1 x | Extension 6 lipos XH > EH |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
2 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Top light Red 10mm/3V (2 pcs) |
1 x | Marco de medición doble 35 mm (2 pcs) |
1 x | Lancha salvavidas 58 mm (5 pcs) |
1 x | Foreman, scale 1:32 |
1 x | 4 mm Prop Adapter M8 |
1 x | JETImodel DPS 40 |
1 x | Female connector for 12 pines AWG |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | Racor 4/6 mm |
1 x | Wood grids 30x100 mm (30 pcs) |
1 x | Coupling for 3,2 mm axis |
1 x | Male connector for 6 pines AWG |
1 x | Metal gratings 26x11 mm (20 pcs) |
1 x | Pile railing 2D/30 mm (10 pcs) |
1 x | Block 15x23 mm (5 pcs) |
1 x | TS832 to Gopro AV/Power Cable |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Helice FOXY 22x10 2-Bl |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | DPSI Ampere battery backer |
1 x | Y-Hose connector 4mm |
1 x | SAVAGE Max Red 1080 mm |
1 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | 800TVL CMOS camera for FPV |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | 30/11-26 Zoll, 3-Blade Scale |
1 x | T-Hose connector 2-2-2 mm |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Body for landing gear Ø 4 mm |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Racor "Y" 3 mm |
|
281,180.56EUR |