1 x | USB Charger 12V DC for car |
1 x | USB Charger 120-240V AC |
2 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
3 x | Xplorer4 anemometro |
1 x | Xplorer3 anemometro |
1 x | Xplorer1 anemometro |
1 x | Premium servo extension 50cm |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Extension 30 cm (Futaba) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Extension 100 cm (Futaba) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | BALSA triangular 6x6x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
3 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Propeller APC 14x8.5 Electric Pusher |
2 x | Flap hinge (6 pcs) |
3 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | 25 mm reinforced hinge |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Gates hinge |
1 x | 15 mm reinforced hinge |
3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Long pinned hinge (12 uds) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | 18 mm reinforced hinge |
1 x | Small pinned hinge (12 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
3 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Long pinned hinge (6 uds) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
3 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Short ball link M2 (6 uds) |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Ferrita 17x10x6.5 mm |
1 x | Support Filtro FESTO |
2 x | Cierva C30 simulated motor |
1 x | Head runner |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | LA500 Autogyro |
1 x | Head spacer |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | X-RAY Micro QR (Elevator) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | LA500 ciclic lever |
1 x | Fox MDM 1 6000 mm |
1 x | LA500 front gear holder |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Indoor Brushed motor kit |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Circlick securite |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | MAMBO 17 |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Futaba Female 40 cm extension |
1 x | Fox 4000 mm Airworld,cabina |
1 x | Extension silicon 100 cm (Graupner) |
2 x | Electric spoiler 440 mm (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Motor holder for AC 28/7 |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Chili Race F3K (aramid nose) |
1 x | Fox 4000 mm (Airwold) |
1 x | Fournier RF-4D |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | LS-8 GFK 6m Glider |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Cooler motor type 150 |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Motor mount VANQUIST 48" F3A |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Xplorer2 anemometro |
2 x | Mobile Terminal |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Prop Holder AXI 41xx V2 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Oracover light Grey 2m |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Motor SAITO FG-61 TS |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Indoor hinge with servo arm integraded |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
3 x | Medium pin type hinge (12 uds) |
1 x | Starter EM Gear Power 80 |
1 x | |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | Avanti S 1.8m Jet White/Blue + Landing gear |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | 5 mm Prop Adapter M6 |
1 x | Allen wheel collar M3x3 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Adapter 3,2 mm M6 |
1 x | Adapter 3,2 mm M8 |
1 x | 4 mm Prop Adapter M6 |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | SunCover 2.6 Class (SebART) |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
1 x | 18 mm wing servo holder |
1 x | Albatros red/white (Top Model) |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Cierva C30 Elevator |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | 11 mm wing servo holder |
1 x | Ball joint long |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | SunCover 2.2 Class (SebART) |
1 x | 13 mm wing servo holder |
1 x | Hopper UAT Sebar 600 ml |
1 x | Bidule 55 2460 mm Cabina |
1 x | Head lower part |
1 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | Challenger ARF (Top Model) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Blade holder lower |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Complet landing gear |
1 x | Balls 4 mm |
1 x | Avanti S Jet , Carrying bags (SebArt) |
1 x | BULLIT Wing 840 mm |
1 x | Blade holder center |
1 x | ARTIST 1.560 mm |
1 x | Piston ring for DA-150 |
1 x | Pick up DA50/100/150 |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Battlife Guard 2s |
1 x | Charger ISDT 608AC 200W |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Glider Ka 7 Red (2540mm) |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | Vasa model Catapult |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
1 x | Wings Bags JEEMO |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | Miniature brass strap hinge, 1 m |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Y Cable |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | Jeemo Dolly |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Motor mount EDGE 540 48" |
1 x | Round flex hinge (12 uds) |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Small pinned hinge (6 uds) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Oracover Black 10 m |
1 x | Frontal Adapter for AXI53xx |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Universal Prop Saver |
1 x | Motor holder AXI |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Prop Saver for AXI 22xx/xx |
1 x | Propeller Pleg CAM Carbon 14x9 |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Propeller Pleg CAM Carbon 11x7 |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Propeller Pleg CAM Carbon 14x10 |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Propeller Pleg CAM Carbon 11x5 |
|
25,636.95EUR |