2 x | Profile ABS Square 4 x 1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
2 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
3 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
2 x | ABS angle 5,0x5,0x1000 mm |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | L-Connector 4.0 mm x 1000 mm |
2 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Profile ABS half cane 4x1000 mm |
2 x | Profile ABS Square 3 x 1000 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
2 x | 1/6 Pilot "Tony" |
1 x | 1/7 Pilot "Japanese" |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
2 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Piloto JET 1:3,5 |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
3 x | Pilot "Dick" Legends Series (Slimline) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Aluminium sheet 500x250x0,5mm |
2 x | 1/6 Pilot "John" |
1 x | Buy Perforated film 145 cm / 50 m |
2 x | 1/6 Pilot "Buddy" |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 1/6 Pilot "Cindy" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | 1/12 Pilot "Cougar" |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | 1/10 Pilot "Jack" |
1 x | 1/4 Pilot "Mike" |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
3 x | ABS 500 x 400 x 1 mm (white) |
2 x | Pilot JAN 1/4 Saiplanes |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 1/10 Pilot "Jimmy" |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
3 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
3 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
3 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
3 x | Angled clevis with threaded rod M3 |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Kwik link AL M4 con Clip (2 pcs) |
2 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cable coupler M3 (10 uds) |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Black large kwik link (10 pcs) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Cable coupler M2 (10 uds) |
3 x | Couple M4 for wire (10 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
3 x | ED Position Lights wireless (Set of 3) |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
2 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | Set stickers JEEMO "Andy" |
2 x | LED blink wire flashing (red - 2pcs) |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | Profile ABS half cane 8.0x1000 mm |
2 x | ABS angle 3,0x3,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
4 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | 3,2 mm Prop Adapter M5 |
1 x | 4 mm Prop Adapter M6 |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Motor A2212/13T |
1 x | Profile ABS half cane 5.0x1000 mm |
2 x | Fiberglass plate 350x150x1.0 mm |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | X-RAY Micro QR (Rudder) |
1 x | X-RAY Micro QR |
1 x | Glider IKARUS |
1 x | BABY glider (Aero-naut) |
2 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Futaba 30 mm servo rounded arm |
2 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | 54 mm Futaba servo arm tandem with ball link |
3 x | Fiberglass plate 350x150x2.5 mm |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Fiberglass plate 620x540x0,3 mm |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Servo SAVOX SV-1260 MG |
1 x | Futaba 25 mm servo arm with ball link |
4 x | Carbon plate 350x150x3.0 mm |
2 x | Foam plastic plates (310x210x5 mm) |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
2 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Piloto jet 130 mm |
1 x | Mini Infrared Thermomiter |
1 x | Handle for PERMAGRIT lime |
1 x | Mold plugs XT-30 |
1 x | XT-60 Plug Mold |
1 x | Steel brush wheel with 2.35mm |
1 x | Mini Lock Grips 2PCS |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Sealing Iron Profi LCD |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Sealing Iron Sleeve STD |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Mold plugs XT-90 |
1 x | Sub-D Plug Mold |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Dremel PERMAGRIT thin lime |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Dremel 3000 130W |
1 x | Kwik link unmount tool |
1 x | Heli digital angle measurer |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Tool for entel |
1 x | Heat Seal Iron |
1 x | THERMIK XXXL 4,9m CFK Electric |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Surface Indicator Gauge Small |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
3 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Glider KNIRPS |
1 x | Small aluminium horn blue (2pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Horn with ball 40x30 |
1 x | Horn 6/35 with M3 Bearing |
3 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Light System |
1 x | Turbina XICOY X180 light |
1 x | Turbina XICOY X95 compact |
1 x | X-RAY Micro QR (Fuselage with canopy) |
2 x | Turbina X132 H "Light Version" |
1 x | Turbina X45 H "compact" |
1 x | Turbina X132 H "Compact Version" |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | AXI 2204 Multicopter |
1 x | Heli blades angle measurer |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
2 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
1 x | Gear for D 54 |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
2 x | Fiberglass plate 350x150x0.5 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | ALU servo arm 3 mm shaft |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | HITEC 17 mm servo arm with ball link HITEC |
2 x | Spinner propeller pleg. 40 mm / 5,0 mm |
2 x | SSPS105 Super Hi-Power servo |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Gear for D 200 BX |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Carbon plate 350x150x5.0 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | 1/12 Pilot "Tom" |
1 x | Release film 100 cm x 50 m |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 38 mm servo arm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Piñones SAVOX SH-0350 |
2 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Pilot "Goose" (Slimline) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | JETI Counter for DC-16 (Blue) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Small kwik link (10 pcs) |
2 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX |
2 x | PVC grid straight 290x185x0.32 mm |
1 x | Pulley brass 10/2 (2 pcs) |
2 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | wire tensioner (red) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Threaded coupler M2,5 (10 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
3 x | COPILOT Multiplex |
2 x | Arnes cruzado Confort de Luxe PROFI |
2 x | 5 mm Prop Adapter CN-Spinner |
1 x | Suncover 100cc Red |
1 x | One touch canopy lock |
1 x | Landing lights 18 mm (0.71in) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Steering arm 16 mm Ø 4 mm |
3 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | SUS wire 3m (nylon coated) |
3 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Control horn long w/ball |
2 x | Small pinned hinge (6 uds) |
1 x | Large flex hinge (12 uds) |
1 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Spinner NUT M8x1,25 |
1 x | LED wire (green - 2pcs) |
2 x | LED blink wire flashing (orange - 2pcs) |
1 x | Frontal Adapter for AXI53xx |
2 x | LED wire (white - 2pcs) |
2 x | Motor OS 3820-1200 electric |
3 x | Sun Cover PC 21 XXL (JMB Jets) |
3 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
2 x | Resistor 3W 5% 2R2 |
1 x | Cover cap drop-shaped paintable 43 mm |
2 x | Heat sink for Optotronix LEDs |
2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Resistor 3W 5% OR82 |
3 x | Adapter 3,2 mm M8 |
1 x | Adapter 3,2 mm M6 |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
2 x | Threaded coupler M2 (10 uds) |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Adapter 4,0 mm M6 |
2 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | 2,3 mm Prop Adapter M5 |
3 x | LENTUS RR 3.000mm MULTIPLEX |
2 x | Threaded coupler M3 (10 uds) |
1 x | 2 mm Prop Adapter M5 |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
2 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
3 x | Adapter 3,0 mm M8 |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Adapter 3,0 mm M6 |
2 x | Small pinned hinge (12 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Horn mando long (2 pcs) |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Round flex hinge (12 uds) |
1 x | |
1 x | Spinner NUT M5 |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Spinner NUT M6 |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Cables suitable for the motor AC 28/7 |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | Medium pin type hinge (12 uds) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | TS832 to Gopro AV/Power Cable |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | FOX MDM-1 3.500 mm ARF White |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | 5 mm Prop Adapter M8 |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Slave-cable USB Easy Sim |
1 x | Horizontal servo holder |
1 x | Vacuum pump P1-N |
1 x | 1/4 Pilot "Heidi" |
1 x | ASH 31 6.08m Composite Hollow Molded |
1 x | Propeller balancer |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Metal ring front FEMA |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | 3,2 mm Prop Adapter M8 |
1 x | 10 mm Prop Adapter M12 |
1 x | Micro Crystal RX 35.010 Ch 61 |
1 x | GameCommander USB Universal |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | entral piece 3Bl 42 mm 0º |
1 x | Crystal Universal RX 35.020 Ch 62 |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Vertical mounting servo holder |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Focke Wulf FW-190A-8 93", Spinner 3Blade Scale |
1 x | Futaba 52 mm servo arm |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
1 x | 1/12 Pilot "Fighter" |
1 x | Angle measurer |
1 x | Telemetria XYCOY adapter |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Connectors MPX male |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
2 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Spinner propeller pleg. 28 mm/5,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm "Z" carbon |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | Compact on-board starting system (9713) |
2 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Mudguard wheels 112/127 mm |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Mudguard for 140/165 mm wheels |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Receiver CORE PBR-26D 26ch |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | DUPLEX 2.4 EX MBar |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Race 480 |
2 x | LED blink wire flashing (white - 2pcs) |
1 x | Motor class 550 + "M" gearbox 2,85:1 |
1 x | Allen wheel collar M3x5 |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | LED wire (rojo - 2pcs) |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | LED blink wire flashing (blue - 2pcs) |
1 x | Motor OS 3805-1200 electric |
1 x | Pinion 11 - 2 mm |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | 5 mm Prop Adapter M6 |
2 x | Adapter 5,0 mm M8 |
1 x | Pinion 09 - 2 mm |
1 x | White large kwik link (10 pcs) |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Winter-Glove DS tx |
1 x | Transmitter COCKPIT SX 12 M-Link (only Tx) |
2 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
2 x | Pushrod octagone 3/2 with coupler M2 |
2 x | LED blink wire flashing (green - 2pcs) |
1 x | Lead with adhesive (2 pcs) |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Tip wing protector 40x14 (2 pcs) |
2 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Spinner black 30 mm |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Micro flex hinge (12 uds) |
1 x | Pinion 15 - 3,2 mm |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | 6 mm Prop Adapter M8 |
1 x | PROFI TX fastening rings |
1 x | Potenciometro micro |
1 x | Interruptor On/Off Corto micro |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
2 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Glider Ka 7 Red (2540mm) |
1 x | Motor class 400 + gearbox 1,86:1 |
1 x | Race 400 7,2 V |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | ASG 32 560 mm |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | Race 650 Johnson motor 7.2v |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Control for forward wheel (MINI) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Spinner NUT 1/4x28 |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Spinner negro 40 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Canopy Latch |
2 x | Landing gear frontal support 29x26x13,5 |
1 x | Snap for floding prop for 2 mm axi |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | LED wire (blue - 2pcs) |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | LED wire (orange - 2pcs) |
2 x | Motor ORBIT 20-12 with coolingfan |
1 x | Motor Advance 30-10 F3A |
1 x | Long pinned hinge (6 uds) |
1 x | Cockpit latch closing I=10 mm |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Small flex hinge (12 uds) |
1 x | Epoxy 5min KAVAN 2x 100g |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Cyano INSTA - FLEX+™ (25g) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | ExtraCA Top |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | Adapter 4,0 mm M8 |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | |
|
50,111.58EUR |