1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Flap hinge (6 pcs) |
2 x | Miniature brass strap hinge, 1 m |
3 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
4 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
3 x | Long pinned hinge (6 uds) |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | 15 mm reinforced hinge |
2 x | Gates hinge |
3 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Long pinned hinge (12 uds) |
3 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
3 x | Nylon hinge 20x20x0,3 (10 pcs) |
4 x | Small pinned hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
3 x | Micro flex hinge (12 uds) |
1 x | 25 mm reinforced hinge |
3 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | PIX Hawk with accesories |
1 x | PPM Encoder Module |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
3 x | 6 mm red aluminium threaded horn with patella |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Angle measurer |
2 x | Slave-cable USB Easy Sim |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Rudder |
1 x | Blades 330mm |
1 x | Steering lever |
1 x | 4 blades set |
1 x | Support ECU Xicoy X-45 |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Support conector MPX (6 pcs) |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Foam plastic plates (310x210x2 mm) |
1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
2 x | Small pinned hinge (6 uds) |
2 x | Large flex hinge (12 uds) |
1 x | 18 mm reinforced hinge |
2 x | Foam plastic plates (310x210x5 mm) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Battery bed V2_M (black) |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
2 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | Horn DUBRO 1/2A |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Horns indoor |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Micro control horn (2 pcs) |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Horn mando long (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Aluminium battery holder red |
1 x | LiPo Storage Box Type "P" |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
2 x | Glass fibre sleeve Ø 20 mm |
1 x | Glass fabric 25 g (2 m²) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Battery bed V2_S (black) |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | LA500 tail empennage |
1 x | Blade Holder Full (3 blades) |
1 x | 3 blades set |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support Filtro FESTO |
1 x | Piñon motor rotor LA-500 |
1 x | Blade Holder Full (4 blades) |
1 x | Tail tube RAINBOW |
1 x | Blade Holder (3 blades) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Support FUEL DOT V3 |
1 x | LA500 freewheel bearing |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Indoor hinge with servo arm integraded |
1 x | Small flex hinge (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | Round flex hinge (12 uds) |
2 x | Medium pin type hinge (12 uds) |
2 x | Fiberglass plate 350x150x3.0 mm |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Long horn 50x26 |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Mudguard for 140/165 mm wheels |
1 x | Restrictor FESTO 3/3 mm |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Small adjustable control horn with bearing |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Cable with accesories |
1 x | Long adjustable control horn 3x34 |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Charger LiPo Charger4 |
1 x | Charger SKY RC D200 neo |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | 8 mm Adapter for AXI53xx |
2 x | Frontal Adapter for AXI53xx |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Compact on-board starting system (9715) |
1 x | Angled clevis with threaded rod M3 |
1 x | 150 Newtons FEMA absorber |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | 300 Newtons FEMA absorber |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Compact on-board starting system (9525) |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Mudguard wheels 112/127 mm |
1 x | Z-shaped servo mount |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | 100 Newtons FEMA absorber |
1 x | Servo holder for retract |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Horn with ball 40x30 |
1 x | Horn 5/15 with M2 Bearing |
1 x | USBCOM 5i |
1 x | Long adjustable control horn with bearing |
1 x | ESC ALPHA 60A HV |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Small aluminium horn blue (2pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | 20 mm carbon horn |
2 x | 6 mm aluminium horn with patella |
1 x | Adjustable brass horn threaded M3 |
1 x | 6 mm M3 variable horn |
1 x | 5 mm M2 variable horn |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
2 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
2 x | Indoor Brushed motor kit |
2 x | Micro Crystal RX 35.120 Ch 72 |
2 x | Servo NARO Max Std |
1 x | Crystal Universal RX 35.120 Ch 72 |
1 x | LA500 rotor head core |
1 x | Micro Crystal RX 35.010 Ch 61 |
1 x | GameCommander USB Universal |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Adaptador USB - YGE |
1 x | EasyFLY Addon |
1 x | Interface Jack Adapter IKARUS |
1 x | cable TexY |
1 x | Washer 2.2×4 |
1 x | Screw M4x20 (10 pcs) |
1 x | ESC YGE 205 HVT BEC |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | ESC YGE 8 S |
1 x | TMM 1210-3S heli |
1 x | PPS-4D Propeller |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | Fuselage Autogyro RAINBOW |
|
8,945.47EUR |