1 x | Pilot "Duke" Legends Series (Slimline) |
2 x | 1/6 Pilot "Buddy" |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Piloto Jet "Green" 1/6 Scale |
2 x | 1/6 Pilot "Tony" |
2 x | 1/6 Pilot "John" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 1/10 Pilot "Jack" |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | 1/6 Pilot "Cindy" |
1 x | 1/7 Pilot "Japanese" |
1 x | 1/12 Pilot "Fighter" |
2 x | 1/6 Pilot "Garry" |
2 x | Cinta Goldfix 1m |
3 x | SE Ring 250 mm (2 pcs) |
2 x | SE Ring 240 mm (2 pcs) |
2 x | SE Ring 400 mm (2 pcs) |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20x1000 mm Ring Strap Back To Back |
3 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Spikes Band (5 m) |
4 x | 20x200 mm battery rings |
1 x | Windsock Ozone L -1200 mm |
1 x | LUCAS pilot ARTF |
1 x | Wing OXY 5,0 m2 |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Ventus 1:4 set of instruments |
2 x | Interface Jack Adapter IKARUS |
1 x | EasyFLY Addon |
3 x | Simulador RealFlight RF-9.5 S (sin emisora) |
4 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Long ball link M3 (6 uds) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Round Rod 6,0x1000 mm |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Squared carbon wing joinner 5x5x220 mm |
4 x | Slave-cable USB Easy Sim |
2 x | Foil for sticking flaps and ailerons |
1 x | Rocket D9-7 |
4 x | SE Ring 200 mm (2 pcs) |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
3 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Screw M2x6 (10 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Screw M3x12 (10 pcs) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Spray EC Red 400ml |
1 x | Spray adhesive AEROFIX 2 |
1 x | |
1 x | SIMtransmitter 6 Mode 2 |
1 x | GameCommander USB Universal |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Tail boom brace LOGO 480 |
1 x | LA500 rotor head shaft |
1 x | LA500 rotor head core |
2 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Bateria LRP 2200-7.2v 6 cell NiMH |
2 x | Balsa panel 3.0x100x1000 mm |
2 x | Balsa panel 8.0x100x1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
2 x | 89 mm INO spinner (carbon imitation) |
2 x | 89 mm aluminium spinner. |
1 x | Aero shocks |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
2 x | Bags wings/rudder ODYSSEY |
2 x | Balsa panel 2.5x100x1000 mm |
1 x | Bags de Luxe ODYSSEY |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Balsa panel 10x100x1000 mm |
2 x | Balsa panel 4.0x100x1000 mm |
1 x | Ball Link Plier |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | BALSA trip 10x10x1000 mm |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | BALSA triangular 10x10x1000 mm |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | Angle support XT60 conector |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Aluminium servo arm (2 uds) |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Air pressure gauge |
2 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | AC-10 pre-rotacion with motor |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | 3,2 mm Prop Adapter M6 |
2 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 6 mm Prop Adapter M8 |
2 x | SE Ring 330 mm (4 pcs) |
1 x | 5 mm Prop Adapter M8 |
1 x | 10 mm Prop Adapter M12 |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | SCHARNHORST accessories |
1 x | 4 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
2 x | SE Ring 480 mm (2 pcs) |
1 x | |
1 x | 100 Newtons FEMA absorber |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | 200 Newtons FEMA absorber |
1 x | FIALA Propeller 23x10 |
1 x | FIALA Propeller 20x8 |
1 x | 3 mm Prop Adapter M6 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 2 mm Prop Adapter M6 |
1 x | Marker ties (20 pcs) |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | 5 mm Prop Adapter M8 |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Dumper propeller 6/8 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Prop Shaft Adapter 5 mm "long" |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | 6 mm Prop Adapter M8 |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Tirpiz Battleship 1:200 |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Aero-Master (Aero-naut) |
1 x | 4 mm Prop Adapter M8 |
1 x | SE Ring 450 mm (2 pcs) |
2 x | Tape GFK 50 mm |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | 3 mm Prop Adapter M6 |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Tape GFK 25 mm |
1 x | Stick coupler Ms 15 mm |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Tape GFK 38 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | BULLIT Wing 840 mm |
1 x | Ciano KAVAN Medium 20g |
1 x | BETA 1400 ARF Red |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | Engine mounts for .09 - .19 engine |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | Deposito DUBRO 3000cc-100oz |
1 x | Lock nut M2 (10 pcs) |
1 x | Lock nut M3 (10 pcs) |
1 x | Nylon Screw M6x40 |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | Cable video GoPro |
1 x | Extension Arm for Carburetor (red) |
1 x | RX cabel |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | 25 mm carbon servo arm |
2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | Lock nut M5 (10 pcs) |
1 x | Fod Guard 94x34 mm |
1 x | Fod Guard 83x32 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Interface Realflight Simulator |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Carburator Moki S250 |
1 x | USB Mini Camera endoscope |
1 x | Carburator Moki S 180 |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Female connector for 16 pines AWG |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Retract undercarriage |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Spinner 80 mm GFK |
1 x | Spinner 140 mm GFK |
1 x | Spinner 105 mm CFK |
1 x | Connectors MPX female |
1 x | 110x55 mm SLH KOVO wheel |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | 22m Fitting barb |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | 1000 cc gasoline fuel tank complet |
1 x | 64 mm aluminium spinner |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | 90 mm CFK long Spinner fixed by a central screw |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | 18m Fitting barb |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Spinner 110 mm GFK |
2 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Spinner 90 mm GFK |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Spinner 115 mm GFK |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Charger ISDT 608AC 200W |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Spinner 125 mm GFK |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | MR30 connector male |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Smoke pump RCEXL |
1 x | Antenna holder bracket double |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Electric Fuel pump |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Vacuum pump 12 CFM |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Robart Door Hinge (Pk2) |
1 x | Baseplate servo |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Extension Arm for Carburetor |
1 x | Electric Fuel Pump 12V |
1 x | Bags de Luxe ASPIRE |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Vacuum pump P1-N |
1 x | Carburator Moki S400 |
1 x | RX external cable for estandar receivers |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | LiPo Storage Box Type "P" |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
|
14,081.28EUR |