2 x | Motor A2212/13T |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
3 x | Miniature brass strap hinge, 1 m |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Small pinned hinge (12 uds) |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
3 x | Nylon hinge 15x0,3 (10 pcs) |
3 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
2 x | Gates hinge |
2 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Vacuum bag, 1200 mm x 50 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
2 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
2 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
2 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
2 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Oracover Black 10 m |
1 x | Vacuum pump P1-N |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Cap Hispano Aviación |
3 x | Vest clothes Hispano Aviación |
2 x | Carbon plate 350x150x3.0 mm |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
4 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
1 x | Support ECU Xicoy X-45 |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Support FUEL DOT V3 |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Round flex hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Indoor hinge with servo arm integraded |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Small pinned hinge (6 uds) |
2 x | Pin hinge 34x16 mm (10 uds) |
1 x | Small flex hinge (12 uds) |
2 x | Robart Door Hinge (Pk2) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | F450/550 Quadcopter, landing gear |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Balsa panel 1.5x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Balsa panel 8.0x100x1000 mm |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Servo Metal Horn 15.5 mm MKS |
1 x | Servo HITEC D131 MW nano |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Servo HITEC D145 SW |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Servo HITEC D85 MG |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Soporte metal para servos |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | AC-10 pre-rotacion with motor |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Ball Link Plier |
2 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Xplorer2 anemometro |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Xplorer1 anemometro |
2 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Dust collector for mould cleaning |
1 x | Softshell Hispano Aviación |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Z Bender - S Type Tool |
1 x | Digital precision scale up to 2000 g |
1 x | Shirt Hispano Aviación |
1 x | Aluminium servo arm (2 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Hot Glue Stick GREEN |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Long pinned hinge (6 uds) |
2 x | 18 mm reinforced hinge |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | 30 cm BEC cable (female) |
1 x | 30 cm BEC cable (male) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | 25 mm reinforced hinge |
1 x | Motor OS 3820-1200 electric |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | 3 LiPo XH>EH adapter |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | 2 LiPo XH>EH adapter |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | TMM 2512-3S heli |
1 x | TMM 1210-3S heli |
1 x | Swing 1000 |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | PS-050 TONEGAWA Servo |
1 x | Gear set HITEC D645 MW |
1 x | Gear set HITEC HS-56 HB |
1 x | Gear set HITEC HS-225 |
1 x | Servo HITEC HS-65 HB |
1 x | Servo HITEC HS-325 BB |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | Carbon plate 350x150x2.0 mm |
1 x | "Taxi Tank" Fuel Tank |
1 x | 10 mm gas motor standoff |
1 x | 1000 cc gasoline fuel tank complet |
1 x | 1/10 Pilot "Jack" |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Vess propeller 13x6 S |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Propeller VESS 32A |
1 x | Vess propeller 11x7 S |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Bags de Luxe ASPIRE |
1 x | Bags de Luxe ODYSSEY |
1 x | Angle support XT60 conector |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | |
1 x | 280 cc gasoline fuel tank complet |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Swift S-1 2400mm ARF Red (KAVAN) |
1 x | Propeller VESS 27A |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Antenna holder bracket double |
1 x | Baseplate servo |
1 x | Charger SKY RC D200 neo |
1 x | Carburator Moki S400 |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Balsa panel 10x100x1000 mm |
1 x | Combo RAY C3542-1000 + ESC 60A |
1 x | BALSA trip 10x10x1000 mm |
1 x | 22m Fitting barb |
1 x | 3D Spinner for DLE 30 |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | 1/6 Pilot "Garry" |
1 x | 200 mm extensión servo HITEC/JR |
1 x | 1/6 Pilot "John" |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
|
10,464.00EUR |