1 x | Adjustable launching hook |
1 x | LOWER TOW HOOK |
1 x | Tube Pitot to PIXHAWK |
1 x | BEC 3A FOXY |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | 30 cm BEC cable (male) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | 80 mm rods set for direction control |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | 12 mm dogdrive props |
2 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | LED blink wire flashing (green - 2pcs) |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
2 x | SERVO HOLDER |
1 x | LED wire (green - 2pcs) |
1 x | LED wire (rojo - 2pcs) |
1 x | LED wire (white - 2pcs) |
1 x | Towing hook <3m |
1 x | ED Position Lights wireless (Set of 3) |
1 x | Blades 330mm |
1 x | Fixed launching hook |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | X-RAY Micro QR (Rudder) |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | E-FUN BUG (ROI-Import) |
2 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | DINO Glider ARC |
1 x | X-RAY Micro QR (Elevator) |
1 x | Parachute BACKUP X100 |
1 x | Glider KNIRPS |
1 x | BABY glider drawings (Aero-naut) |
1 x | Windsock Ozone L - 700 mm |
1 x | Wing OXY 5,0 m2 |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | ULTIMATUM 2.0 m green/black |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
2 x | Micro flex hinge (12 uds) |
2 x | Nylon Screw M6x40 |
2 x | Nut for mounting M2,5 (4 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
3 x | Excentric gearbox for 3,2mm axis (2,33:1) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
2 x | Fuel line plug Large 2 pcs |
1 x | Blind nut M3 (4 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | ULTIMATUM 2.0 m Red Bull |
1 x | ULTIMATUM 2.0 PRO "McLAren" |
1 x | ULTIMATUM 2.0 m white |
2 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
3 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
2 x | Nylon gear block Ø 5 mm (2 uds) |
2 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Micro control horn (2 pcs) |
2 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Micro clevis (10 uds) |
2 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
2 x | Nut for mounting M2 (4 pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
2 x | Nut for mounting M6 (4 pcs) |
2 x | Motor holder for AC 28/7 |
1 x | Pan Head Screw M2x6 PH |
2 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
2 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Nylon threaded block M4 (2 uds) |
2 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
2 x | Nylon Screw M5x30 |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
2 x | M3/5Diam metal ball link V3 (2 pcs) |
2 x | Pan head screw M2x16 PH |
1 x | Nut for mounting M3 (10 pcs) |
2 x | Nylon gear block Ø 6 mm (2 uds) |
2 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
2 x | Pan Head Screw M2x8 PH countersunk head |
3 x | Nylon threaded block M5 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,33:1) |
1 x | Horn mando small (2 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
2 x | COMPACT drive 26/45-20 DL=175 motor |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Excentric gearbox for 2,0mm axis (3,75:1) |
2 x | Excentric gearbox for 2,0mm axis (5,0:1) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Control horn long w/ball |
1 x | Excentric gearbox for 2,3mm axis (4,1:1) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Excentric gearbox BB for motor 600, 3,2mm axis (1,75:1) |
3 x | Frontal support Speed 400/480 |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Cable coupler M3 (10 uds) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Blind nut M4 (4 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Central support Speed 600 |
1 x | Ball link M1.6 (6 uds) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Set stickers JEEMO "Andy" |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Paramotor BackPack XXS 2 |
1 x | Aramid 50 daN 50 m |
1 x | FOX 2.300 mm V2 PNP (FMS) |
1 x | Glider IKARUS |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | STD excentric gearbox for 2,0mm axis (3,5:1) |
1 x | Pinion 15 - 3,2 mm |
2 x | Nylon threaded block M6 (2 uds) |
1 x | Screw M3x12 (10 pcs) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Central support Speed 280 |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Screw M4x12 (10 pcs) |
1 x | 2 mm Prop Adapter M5 |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Pinion 18 - 3,2 mm |
1 x | Allen wheel collar M4x4 |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | Cockpit latch closing I=10 mm |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Pinion 15 teeth (3:1) 2,3 mm axi diameter |
1 x | Pinion 11 - 3,2 mm |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | 5 mm Prop Adapter M8 |
1 x | Split M1,2x10 (10 pcs) |
1 x | Frontal support Speed 280 |
1 x | Screw M3x30 (10 pcs) |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Planetary gearbox(3,33:1) |
2 x | Excentric gearbox for 2,3mm axis (3,0:1) |
1 x | STD excentric gearbox for 2,0mm axis (3,75:1) |
1 x | STD excentric gearbox for 3,2mm axis (3,0:1) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | STD excentric gearbox for 2,0mm axis (5,0:1) |
1 x | STD excentric gearbox for 2,0mm axis (4,1:1) |
1 x | White large kwik link (10 pcs) |
1 x | Excentric gearbox for 2,0mm axis (5,0:1) |
1 x | Pinion 15 - 3,2 mm |
1 x | Planetary gearbox(3,8:1) |
1 x | Pinion 13 - 3,2 mm |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Excentric gearbox for 2,0mm axis (4,1:1) |
1 x | STD excentric gearbox for 2,3mm axis (2,33:1) |
1 x | Excentric gearbox for 3,2mm axis (3,0:1) |
1 x | Screw M2x8 (10 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Socket Head Screw M2x12 |
1 x | Fuel line plug Small 2 pcs |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Socket Head Screw M2x10 |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Lock nut M4 (10 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Socket Head Screw M2,5x12 |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Frontal support Speed 600 |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Screw M3x8(10 pcs) |
1 x | Lock nut M3 (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Lock nut M2 (20 pcs) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Socket Head Screw M2x8 |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Landing gear strap large (4 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Allen wheel collar M4x6 |
1 x | Threaded coupler M2 (10 uds) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Adapter 3,2 mm M6 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Adapter 4,0 mm M6 |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Landing gear strap small (4 uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Excentric gearbox for 3,2mm axis (4,1:1) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Excentric gearbox for 2,3mm axis (2,33:1) |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,8:1) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
|
32,301.50EUR |