2 x | Cable coupler M2 (10 uds) |
3 x | 25 mm Sandpaper file |
1 x | Flybar support metal LAMA |
2 x | 55 mm aluminium spinner (Kavan) |
1 x | Engine mounts for .09 - .19 engine |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | Concave-Convex sandpaper file 13 mm |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Dummy motor GPW Wasp Scale 1/4 |
8 x | 10 mm aluminium spinner (Kavan) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | SIG Coverall 1.2x1.8 m |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
1 x | Superlight deluxe wheel 56 mm (2 pcs) |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Program card KAVAN PRO |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | SIG Coverall 1.2x0.9 m |
1 x | SIG Coverall 1.2x4.5 m |
1 x | T-shape holder metal LAMA |
1 x | Turbina KINGTECH K260 G5 |
1 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | Superlight deluxe wheel 75 mm (2 pcs) |
1 x | USB programador GO servos |
1 x | Shaft sleeve LAMA |
1 x | Valvula One way |
1 x | Superlight standard wheel 100 mm (2 pcs) |
1 x | Metal clevis M2 (10 uds) |
1 x | LiPo KAVAN 3700 mAh 11.1v 40/80C |
1 x | Glow Plug Clip 1.3 Ah |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Ring 320 mm length (5 pcs) |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | 5 mm M2 variable horn |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Opto Gas Engine Kill Switch |
1 x | Junta humo metalica G35 DLE35 |
1 x | 100g Flux Paste for Silver Solder |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Aluminium ignition bad (red) |
1 x | Xplorer2 anemometro |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Short ball link M3 (6 uds) |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Long ball link M2 (6 uds) |
1 x | Horn 6/35 with M3 Bearing |
1 x | SE Ring 480 mm (2 pcs) |
1 x | 20x200 mm battery rings |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Ball Link Plier |
1 x | Ball link M3 RPA's-UAV's |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Pitts Muffler kit for CAP 21 |
1 x | Jeti Black cap |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | 55% silver electrodes (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Short ball link M1.6 (6 uds) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | GLOW 2C + accesories |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | 6 mm aluminium horn with patella |
1 x | DLE 30 complete electronic ignition |
1 x | Optical RPM Sensor |
1 x | Digital weight, angle and balance meter BASIC |
2 x | M3 Maxi ball link (2 uds) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Horn for flap control (1 pcs) |
1 x | Cut tube |
2 x | Horn DUBRO 1/2A |
1 x | Compact on-board starting system (9715) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | M3 Maxi ball link (2 uds) |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | 1,5x50 mm allen screwdriver |
1 x | Extra long horn 60x30 |
1 x | Cable control set |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | 6 mm Prop Adapter M8 |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Allen wheel collar M3x3 |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Blue smoke canister 100 g |
2 x | "S" set for planes |
1 x | Smoke set "M" |
1 x | Electric rocket starters (6 pcs) |
1 x | 2 LiPo XH>EH adapter |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Interface Jack Adapter IKARUS |
1 x | |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Windsock Ozone L -1200 mm |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Opale Rucksack |
1 x | Para-RC Mix |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | GRE-18 RTR Crawler 1:18 Orange |
1 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Blade holder metal LAMA |
1 x | Lipo KAVAN 2200 mAh 11.1v 30/60C |
1 x | Debonder CA 20g |
1 x | Beech dowels 2.0 x 1000 mm |
3 x | Propeller CFK 14x7 |
1 x | Propeller CFK 15x13 Slim |
2 x | Vess propeller 11x7 S |
1 x | Propeller CFK 14x8 Slim |
2 x | Propeller CFK 18x9 |
2 x | Propeller CFK 13x7.5 |
1 x | Hot Glue Stick RED |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Propeller POWER-PROP 16x10 |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Propeller CFK 15.5x10 |
2 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
3 x | Distanzstück motor OS 120 AX |
1 x | Propeller CFK 15x15 |
2 x | 40,0 mm hydro-propeller (left hydropropeller) |
2 x | Hose clips 6 mm |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | Beech dowels 4.0 x 1000 mm |
2 x | Propeller CFK 23x12 |
1 x | Canopy Latch |
2 x | Beech dowels 3.0 x 1000 mm |
2 x | Foam plastic plates (310x210x2 mm) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
2 x | Decorative caps, multicoloured |
2 x | Propeller CFK 15x7 |
1 x | MZ-18, 9 Channel HoTT |
2 x | Coupling bush 5 - 5 mm |
3 x | Propeller hub spacer 8/5.5 |
1 x | Propeller CFK 12.75x13 |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Propeller POWER-PROP 13x8 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 12x6 tree blades propeller |
1 x | Dust collector for mould cleaning |
1 x | 2,0x50 mm allen screwdriver |
1 x | GLOW 5C + accesories |
1 x | Ball link M2 (10 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Propeller MASTER 7x3 |
1 x | Wheel 38 mm V2 |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Socket head ball link M3 (2 uds) |
1 x | Propeller MASTER 6x3,5 |
1 x | 12x8 tree blades propeller |
1 x | Propeller POWER-PROP 12x6 |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Vacuum pump 12 CFM |
1 x | Joint with bearing M3 22x5,5 |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | 15x7 tree blades propeller |
1 x | 8x6 tree blades propeller |
1 x | Chopped glass fibre strands 3 mm |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Kwik link unmount tool |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | Foam plastic plates (310x210x8 mm) |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Glass fibre sleeve Ø 20 mm |
2 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Parachutist |
1 x | Racor 3/3 mm |
1 x | Racor "Y" 3 mm |
1 x | Propeller POWER-PROP 16x8 |
1 x | 6x4 tree blades propeller |
1 x | Propeller MASTER 7x4 |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
3 x | Aluminium sheet 500x250x0,5mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Control horn long w/ball |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Precision wrench L100 mm |
1 x | Long adjustable control horn with bearing |
1 x | Tachometer Hyperion Multi-pala |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Small adjustable control horn with bearing |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Glass fabric 25 g (2 m²) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Micro control horn (2 pcs) |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | Brass control horn M2 long for wire (10pcs) |
1 x | Short adjustable control horn 3x24 |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | 5 mm M2 variable inclined horn |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Horn mando long (2 pcs) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Film release agent PVA 25 ml |
1 x | 6 mm M3 variable horn |
1 x | |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Xplorer1 anemometro |
1 x | Remote electric ignition system |
1 x | AX-60 starters (5 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | PCARD Wireless System |
1 x | LightBox SR |
1 x | EasyFLY Addon |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Propeller CFK 18x19 |
2 x | Propeller CFK 14x8 |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Spikes Band (5 m) |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Propeller CFK 18x17 |
1 x | Foreman, scale 1:32 |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
2 x | Charger LiPo Charger4 |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Propeller RF CFK 10x17 |
1 x | Flap hinge (6 pcs) |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Vess propeller 12x7 S |
1 x | Propeller CFK 14x10 |
1 x | Propeller VESS 27A |
1 x | Propeller CFK 17x18 |
1 x | Propeller CFK 14x6.5 |
1 x | Propeller CFK 15x13 |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Propeller CFK 13x9 |
1 x | Propeller CFK 11x8 |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Propeller CFK 12X6 |
2 x | Decorative caps, multicoloured, short |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Receiver replacement antenna, approx. 85 |
1 x | 28 mm tailwheel unit |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Mini Infrared Thermomiter |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | MZ-10, 5 Channel HoTT |
1 x | Propeller CFK 20x13 |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Transmitter GRAUPNER MZ-24 Pro |
|
14,700.61EUR |