1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 18 mm reinforced hinge |
2 x | Large flex hinge (12 uds) |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Miniature brass strap hinge, 1 m |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Gates hinge |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
3 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Cockpit plastic closing |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Canopy Latch |
3 x | Steering arm 16 mm Ø 4 mm |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | USB Mini Camera endoscope |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | DYNAMOMETER S-1580 |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
2 x | Lock washer 2.2 mm (20 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Flat washer 4.3 mm (20 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Ferrita con funda |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | 800TVL CMOS camera for FPV |
2 x | Lead with adhesive (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Pushrod octagone 3/2 |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Snap short M2 (10 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Split pin 1.6x16 mm (10 uds) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | 50x45 mm micro-mini servo cover |
1 x | ALU servo arm 3 mm shaft |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
2 x | GLOW 9C + accesories |
2 x | Selfstarr EME35 |
2 x | ALU servo arm 90º 3 mm shaft |
1 x | RCEXL Electronic ignition twin CM-6 |
2 x | Compact on-board starting system (9713) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Recess mount-rem. glow plug set |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | 57 mm micro-mini servo cover |
1 x | Servo AN-8 HBA |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | Vacuum bag, 1200 mm x 50 m |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Release film 100 cm x 50 m |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Oracover Black 10 m |
1 x | Oracover Brown 2 m |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Ciano KAVAN Thick 20g |
1 x | 25 mm Sandpaper file |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
2 x | Threaded insert M3 (4 pcs) |
1 x | Screw M3x20 (10 pcs) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | 19 mm 2:1 black termoretract tube |
1 x | ORACOVER Fluor red (2 m) |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Crystal Universal RX 35.120 Ch 72 |
3 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
3 x | Crystal Universal TX 35.140 Ch 74 |
3 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
2 x | Micro Crystal RX 35.120 Ch 72 |
1 x | Micro Crystal RX 35.010 Ch 61 |
2 x | GameCommander USB Universal |
2 x | Crystal Universal RX 35.020 Ch 62 |
3 x | Hovercraft sailcloth |
3 x | Indoor Brushed motor kit |
2 x | Slave-cable USB Easy Sim |
3 x | Interface Jack Adapter IKARUS |
3 x | Servo NARO Max Std |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
2 x | Allen wheel collar M4x4 |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | POLARON EX 800w charger |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Allen wheel collar M4x6 |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | 80 mm rods set for direction control |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | 140 mm rods set for direction control |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Compact on-board starting system (9724) |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | Compact on-board starting system (9512) |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Parachute P4 |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Paramotor BackPack XXS 2 |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | STD excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Starter EM Gear Power 250 |
1 x | STD excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Servo TOPMODEL DS9010 T |
1 x | STD excentric gearbox for 2,0mm axis (3,75:1) |
1 x | Starter EM Gear Power 80 |
1 x | 90x60 mm standart servo cover |
1 x | Excentric gearbox for 2,0mm axis (3,75:1) |
1 x | 58 mm micro servo cover |
1 x | STD excentric gearbox for 3,2mm axis (3,0:1) |
1 x | GLOW 5C + accesories |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Opale Rucksack |
1 x | Windsock Ozone L - 700 mm |
1 x | Parachute BACKUP X100 |
1 x | Rescue 1,8m2 / BackPack |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | LUCAS pilot ARTF |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Spinner propeller pleg. 45 mm / 4 mm |
1 x | Spare white 36-38 mm spinner |
1 x | Spinner propeller pleg. 40 mm / 4 mm |
1 x | Spinner fold propeller 38 mm (white spare spinner) |
1 x | Z Spinner (CN) 40mm |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
2 x | Crystal Universal RX 35.130 Ch 73 |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | Threaded insert M6 (10 pcs) |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Blind nut M4 (4 pcs) |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
2 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | Z Spinner (CN) 35mm |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | Spare white 30-36 mm spinner |
1 x | Spinner propeller pleg. 33 mm / 6,0 mm |
2 x | PPS-4D Propeller |
1 x | Epoxy 5 min. 200g |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Spinner fold propeller 50 mm (white spare spinner) |
1 x | Z Spinner (CN) 38mm |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
1 x | Spinner fold propeller 36 mm (white spare spinner) |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | Spare white 38-45 mm spinner |
1 x | Spinner propeller pleg. 38 mm / 4 mm |
1 x | Spinner propeller pleg. 33 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | Z Spinner (CN) 42mm |
1 x | Z Spinner (CN) 32mm |
1 x | Spinner propeller pleg. 38 mm / 6 mm |
1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
1 x | Spinner propeller pleg. 45 mm / 6 mm |
1 x | Z Spinner (CN) 30mm |
1 x | White spinner propeller pleg. 36 mm / 5 mm |
1 x | White spinner propeller pleg. 50 mm / 6 mm |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Spinner propeller pleg. 38 mm / 5 mm |
1 x | White spinner propeller pleg. 42 mm / 4 mm |
|
10,919.05EUR |