1 x | EC-Cutter |
1 x | Dean-T Plug Mold |
1 x | Digital scale up to 40 kg |
2 x | Copier 2x20 cm pcs |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Copier 5x20 cm pcs |
1 x | |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
2 x | 100g Flux Paste for Silver Solder |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | 1,5x50 mm allen screwdriver |
2 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | 25 mm Sandpaper file |
2 x | Dust collector for mould cleaning |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | 2,5x60 mm allen screwdriver |
2 x | 2,0x50 mm allen screwdriver |
2 x | Ball Link Plier |
3 x | Ball Link Plier |
2 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Cut tube |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Large flex hinge (12 uds) |
1 x | Small pinned hinge (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Flap hinge (6 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Gates hinge 30x16 mm (2 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | 25 mm reinforced hinge |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
2 x | 15 mm reinforced hinge |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Stickers-digit for marking |
1 x | Hot Glue Stick BLACK |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Z Bender - S Type Tool |
1 x | Screwdriver for Torx® TX8 |
1 x | Starter EM Gear Power 80 |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
3 x | Aramid fibre shears Proton®, 21 cm / 8" length |
2 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Starter Sullivan-STAR 603 DINATRON |
3 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Hot Glue Stick RED |
2 x | CC 02 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | 3 LiPo XH>EH adapter |
1 x | CM-3 |
1 x | CC 03 |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | CC 01 |
1 x | Adapter lead MPX/EC3 |
2 x | Connector Sub-D 2+5 Female |
2 x | Ventus 1:4 set of instruments |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
3 x | 1/6 Pilot "Buddy" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
2 x | 1/10 Pilot "Jack" |
3 x | Pilot JAN 1/4 Saiplanes |
3 x | 1/12 Pilot "Fighter" |
4 x | 1/6 Pilot "Cindy" |
3 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | Pilot "Goose" (Slimline) |
3 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
4 x | 1/4 Pilot "Mike" |
3 x | Pilot "Dick" Legends Series (Slimline) |
3 x | Pilot "Anthony" (Slimline) |
3 x | 1/6 Pilot "John" |
3 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
3 x | Piloto Jet "Red" 1/6 Scale |
2 x | 1/4 Pilot "Heidi" |
1 x | Motor A2212/13T |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Sub-D Plug Mold |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | 55% silver electrodes (2 pcs) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Dremel 3000 130W |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Angle support XT60 conector |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | 110x55 mm SLH KOVO wheel |
2 x | 115x29 mm (4.50") Type jets aluminium core wheel |
3 x | 1/10 Pilot "Jimmy" |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Bandera Frankr 4x6 |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Fishing boat Jule Fischkutter |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Ancla 16 mm (2 pcs) |
2 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | La Capitania di Venetia accesories |
2 x | Glow starter with charger 230v |
1 x | Glow Plug Clip 1.3 Ah |
2 x | Propeller diller for DLE111 and DA85-150 |
1 x | Z Bender - S Type Tool |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
2 x | Sealing Iron Sleeve PROF |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Vacuum pump P1-N |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Handle for PERMAGRIT lime |
1 x | Heat Seal Iron |
1 x | Mold plugs XT-30 |
1 x | Tool for entel |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Mini-handed clamp |
2 x | Smart Soldering Iron 110W/230V AC |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
2 x | Kavan Car 25% nitro 1l |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Propeller diller 5/6,3/8/9 |
1 x | Sealing Iron STANDARD |
1 x | Pistola termica MH 550 micro |
1 x | Mini Lock Grips 2PCS |
1 x | Steel brush wheel with 2.35mm |
1 x | 2 LiPo XH>EH adapter |
2 x | MAX BEC |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
1 x | P 17×5.8 Prop-2PCS/PAIR |
2 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Connector CAN 15 |
1 x | 1/12 Pilot "Tom" |
1 x | 4 LiPo XH>EH adapter |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
2 x | SBEC 40 |
1 x | Female connector for 16 pines AWG |
2 x | Precision wrench L100 mm |
1 x | 1/7 Pilot "Japanese" |
2 x | Piloto jet 130 mm |
3 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Electronic switch JETI SP6 0-15v/6A |
2 x | 1/6 Pilot "Tony" |
2 x | TrainerCord (master-learner) |
1 x | USB interface ALTIS |
2 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
2 x | Extinguisher CO2 - 2 Kg |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Male Prolonger TP 4/5S |
1 x | MAX BEC 2D plus EX |
1 x | EWC6 40 cm wing connector |
1 x | DPSI magnetic switch actuator (housing) |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Interruptor RX/Batterie |
2 x | 1/12 Pilot "Langley" |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Heli blades angle measurer |
2 x | MPS Gas-Cap-Powerswitch |
1 x | Multi-adapter balancer JST - TP |
1 x | Opto Gas Engine Kill Switch |
1 x | Rubber Insert soft, 1 Pcs. |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Magnetic Interruptor MULTIPLEX |
2 x | Piloto JET 1:3,5 |
1 x | Sandpaper file 13 mm |
1 x | Sealing Iron Sleeve STD |
1 x | SPS 70V 140/280 A |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | DPS Switch JR/JR |
2 x | PSC 5 |
2 x | Adapter rotula M3 |
1 x | Gates hinge |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Indoor hinge with servo arm integraded |
1 x | Hitec 46 mm servo arm with ball link |
2 x | HITEC 20 mm servo arm with ball link |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Futaba 38 mm servo arm with ball link |
2 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
2 x | Futaba 46 mm servo arm with ball link |
1 x | Vertical mounting servo holder |
2 x | 17 mm servo arm with ball link DES Graupner |
2 x | Futaba 52 mm servo arm |
2 x | Hitec 25 mm servo arm with ball link |
1 x | 280 cc gasoline fuel tank complet |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 200 mm extensión servo HITEC/JR |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Slave-cable USB Easy Sim |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
2 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Anchor of tow Met. 60 mm |
1 x | Anchor 50 mm (2 uds) |
1 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | Wood anchor 30 mm (2 uds) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | Ancla Hist. 67 mm (2 uds) |
1 x | Ancla Met. 16 mm (5 pcs) |
1 x | Liferaft 47 mm |
1 x | Propeller POWER-PROP 7x7 |
1 x | SPS 70V 100/200 A |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | IMPULSE 2 F3F |
1 x | JETImodel SINGLE BEC |
1 x | Male connector for 16 pines AWG |
1 x | Female connector for 20 pines AWG |
1 x | SWTU2 switch |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Hacker X-Pro USB interface V2 |
1 x | MPX plug mold V1 |
1 x | Screwdriver for Torx® TX6 |
2 x | |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | USB HLS prog. interface |
3 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | SBEC Jeti |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Tachometer HANGAR 9 digital |
1 x | Switching module high voltage SXH |
2 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Switc electronic 30 Amp |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | SPARK Switch 5.9v |
1 x | 70 mm aluminium spinner. |
1 x | Futaba 38 mm servo arm |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | Hitec 20 mm servo arm |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | 3D Spinner for DLE 30 |
1 x | 51 mm aluminium spinner. |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Nylon Screw M5x30 |
1 x | 57 mm aluminium spinner. |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | 45 mm aluminium spinner. |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | Futaba 20 mm servo arm |
1 x | 550 cc gasoline fuel tank complet |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Ball link M3 (10 pcs) |
1 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | Screw M2x8 (10 pcs) |
1 x | Nylon Screw M4x20 |
1 x | Screw M3x20 (10 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Screw M4x30 (10 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Screw M2x6 (10 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Screw M4x12 (10 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Nylon Screw M6x40 |
|
14,205.01EUR |