1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Ferrita 17x10x6.5 mm |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Black silicone 0,25 mm² wire (25 m) |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | 5 line servos wire black (1 m) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
4 x | White silicone 0,25 qmm wire (150 m) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | 10m servo "Premium" wire (white/red/blue) |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
2 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
3 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
3 x | Flap hinge (6 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Micro flex hinge (12 uds) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Gates hinge |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Smoke set "Glider" |
1 x | Field folding model stand |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Programador FUTABA USB CIU-3 |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | SERVO DES 806 Pignons |
1 x | Support pump Xicoy X45 |
1 x | Futaba BLS152 - Upper Case |
1 x | Soporte metal para servos |
1 x | Servo FUTABA S 3071 HV S-Bus |
2 x | 10-15mm Servo Arm |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
2 x | 12x8 tree blades propeller |
2 x | 3 mm Leader (L 100 mm) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
2 x | 290 mm M4/4 mm Prop shaft |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Cable Cargador FUTABA |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
2 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | Head lower part New |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Tail boom |
1 x | Blade holder center GFK 0,5 mm |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Balls 4 mm |
2 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Screws M1,6x6 Allen |
1 x | Pan Head Screw M2x6 PH |
1 x | Blades 330mm |
1 x | Head spacer |
1 x | Head core |
1 x | Rotor Mast |
1 x | Battery plate |
1 x | Screw KB 1.4x6 mm (10 pcs) |
2 x | Blade holder upper |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Propeller CFK 12.75x13 |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
2 x | Spannlack 1000 ml |
1 x | Universal Colour Paste deep black 250 g |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Glass fabric 25 g (2 m²) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
2 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
2 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Spray EC Red 400ml |
1 x | PARTALL® Hi-Temp Wax, 340 g |
2 x | Partall paste 650 g |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Paint gun for sprays |
1 x | Hobbylite Filler, Balsa colour |
1 x | Nitroverdu 500 ml |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Silicone red 4,0 qmm wire (25 m) |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Chopped glass fibre strands 3 mm |
1 x | Fiberglass plate 350x150x0.5 mm |
2 x | Silicone red 2,5 qmm wire ( 1 m) |
2 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Aluminium sheet 500x250x0,5mm |
2 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
2 x | Silicone red 1,0 qmm wire ( 1 m) |
2 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Balsa panel 8.0x100x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Round flex hinge (12 uds) |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Miniature brass strap hinge, 1 m |
2 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | 10-15mm Servo Arm HITEC |
2 x | Block 15x23 mm (5 pcs) |
2 x | CAM-Carbon Light Prop 11x6" |
1 x | Boat 140 mm |
1 x | Block 21x19 mm (5 pcs) |
1 x | Central piece 62 mm 0º |
1 x | Cornamusa 8 mm plastico (10 pcs) |
1 x | Central piece 52 mm - 2,5º |
1 x | SSPS105 Super Hi-Power servo |
1 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
1 x | Cargqador GensAce IMARS III Pro Smart Balance RC |
1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | CAM-Carbon Light Prop 10x5" (Prop right) |
2 x | BOX-Setup Actro-marine |
2 x | Boat 82 mm |
1 x | Cadena 1.0mm x 1 m |
1 x | Axial ball bearing Ø 5 mm |
1 x | CAM-Carbon Light Prop 11x7" |
2 x | BLOCK m.Ose Ms vern 12 |
2 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
1 x | CAM-Carbon Light Prop 10x5" (Prop left) |
1 x | BABY glider (Aero-naut) |
2 x | Bocina 30 mm (1 pcs) |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Boat 43 mm (5 pcs) |
1 x | CAM-Carbon Light Prop 10x7" |
2 x | Bocina Ms 18 mm (3 pcs) |
1 x | Brass wire 0.30 mm (25 m) |
2 x | Cabestrante 13 x12 mm (5 pcs) |
3 x | Bird (Aero-naut) |
1 x | CAM-Carbon Light Prop 11x5" (Prop right) |
1 x | CAM-Carbon Light Prop 10x5" (Prop right)) |
2 x | CAM-Carbon Light Prop 10x6" |
1 x | CAM-Carbon Light Prop 10x5" (Prop left) |
1 x | Boat with oars 110 mm |
1 x | CAM-Carbon Light Prop 11x5" (Prop left) |
2 x | Cabestrante plastico 5x6 mm (10 pcs) |
1 x | Boat vents 10mm (2pcs) |
1 x | Double BLOCK 5x10x5 mm (3 pcs) |
1 x | Chain 1.5mm x 1m |
1 x | Cleat 20 mm (2 pcs) |
1 x | Central piece 52 mm 0º |
1 x | Central piece 52 mm + 5º |
1 x | Cleat 15 mm (2 pcs) |
1 x | Central piece 47 mm - 2,5º |
1 x | Chigre de amarre Scale 1:32 |
1 x | Central piece 42 mm - 2,5º |
1 x | Doppelpoller 7 mm plastic (10 uds) |
1 x | Double BLOCK 3x9x5 mm (3 pcs) |
1 x | Central piece 42 mm - 5º |
1 x | Central piece 42 mm + 5º |
2 x | Snap pin for micro clevis (10 uds) |
1 x | Futaba R3006SB T-FHSS 2.4GHz |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Propeller electric carbon 10.5x8 |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Propeller CFK 18,5x12 |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | One touch canopy lock |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Spinner propeller pleg. 28 mm/5,0 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Combo lighting module with covering drop shape |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
1 x | Tray for FUTABA 14SG/16SZ |
1 x | Transmitter Stick Ends V3 Red - M3 (2 pcs) |
1 x | Receptor FUTABA R7006SB FASSTest/FASST |
1 x | LA500 Autogyro |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
1 x | |
1 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
1 x | Receptor FUTABA R3106GF T-FHSS |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | Baering 3x8x4 |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Nylon Screw M6x40 |
1 x | Side Plate |
1 x | Screw M2x8 (10 pcs) |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Propeller electric carbon 9.5x7 |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | 6x4 tree blades propeller |
1 x | Propeller POWER-PROP 14x12 |
1 x | Propeller POWER-PROP 12x9 |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Screws of the Back Cover for DS14/16/24-Tx (8pcs.) |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Silicone red 1,5 qmm wire ( 1 m) |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
2 x | White silicone 0,25 mm² wire (25 m) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Lead with adhesive (2 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Snap for floding prop for 2 mm axi |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Cockpit plastic closing |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Landing gear frontal support 25x32x16 |
1 x | Canopy Latch |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Allen wheel collar M3x3 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Covered closure or fairings |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Allen wheel collar M4x4 |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Snap long M2 (10 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Snap short M2 (10 uds) |
1 x | Neck strap JETI DS |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Propeller CFK 12X6 |
1 x | Propeller CFK 15x15 |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
2 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Propeller CFK 14x10 |
1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
1 x | Propeller CFK 13x9 |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Heat sink for Optotronix LEDs |
1 x | Combo lighting module with covering drop shape |
1 x | DPSI Ampere & Voltage bundle |
1 x | DPSI Micro MPS |
1 x | DPSI RV Mini 6 Magic |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | Balsa panel 1.0x100x1000 mm |
2 x | DUPLEX 2,4GHz MRPM EX |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
3 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Pitot tube JETI MSpeed DUPLEX |
1 x | 15 mm reinforced hinge |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | Central piece 38 mm 0º |
1 x | CAM-Carbon Light Prop 13x5" Q500 (Prop left) |
1 x | Housing Ø 4 mm (2 pcs) |
1 x | Cable pass Ms 9x5 mm (10 pcs) |
1 x | Balsa panel 10x100x1000 mm |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Antenna holder bracket double |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 25 mm reinforced hinge |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Long pinned hinge (12 uds) |
1 x | Suport PITOT |
1 x | DUPLEX MUI 50 Sensor |
1 x | AddCAP 10AS capacitors |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | DUPLEX MUI 30 Sensor |
1 x | Aluminium battery holder red |
1 x | LiPo Storage Box Type "BIG" |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | 25 mm fenders (10 pcs) |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | CAM-Carbon Light Prop 13x5" (Prop right) |
1 x | CAM-Carbon Light Prop 9x5" (Prop right) |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Z Spinner (CN) 32mm |
1 x | Spinner propeller pleg. 38 mm / 4 mm |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | Spinner plastic balck propeller pleg. 30 mm / 3,2 |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Fishing boat Jule Fischkutter |
1 x | Aqua RACE 70 (without motor) |
1 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
1 x | MT 125 temperature sensor |
1 x | DUPLEX MRMP Hall EX |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | DUPLEX 2.4GHz GPS |
1 x | DUPLEX 2.4 EX MBar |
1 x | Small pinned hinge (12 uds) |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | DUPLEX 2.4EX RC Switch |
1 x | 18 mm reinforced hinge |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | Servo FUTABA S 9670 SV |
1 x | Battery bed V2_S (black) |
1 x | Servo HBS 690BB HV Digital |
1 x | Carbon plate 350x150x1.0 mm |
1 x | 12x6 tree blades propeller |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | 10x7 tree blades propeller |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 10 mm portholes (10 pcs) |
1 x | 29,0 mm propeller (left propeller) |
1 x | 3 mm Prop Adapter M6 |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 12 mm mast holder |
1 x | 15x7 tree blades propeller LEFT |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 300x4 mm M4 shaft ship |
1 x | 28 mm turnbuckle |
1 x | 11x7 tree blades propeller |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Catalog AERO-NAUT 2016 |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | CAM-Carbon Light Prop 9x5" (Prop left) |
1 x | Capstan of plastic 91x44x45 mm |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | Carburator joints for SAITO FA80/80GK/72/72GK |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop right) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Cancamo Ms 7 mm (50 pcs) |
1 x | CAM-Carbon Light Prop 12x7" |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | CAM-Carbon Light Prop 13x6" (Prop right) |
1 x | CAM-Carbon Light Prop 13x5" Q500 |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
1 x | CAM-Carbon Light Prop 9x6" |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | CAM-Carbon Light Prop 13x6" (Prop left) |
1 x | Red spinner 40-45 mm |
1 x | Spinner propeller pleg. 33 mm / 5,0 mm |
1 x | 50 mm white plastic spinner for folding propeller |
1 x | 75 mm |
1 x | Ancla Met. 16 mm (5 pcs) |
1 x | Spinner propeller pleg. 38 mm / 6 mm |
1 x | Mounting base Ms 12 mm |
1 x | Spinner propeller pleg. 45 mm / 4 mm |
|
23,116.83EUR |