1 x | Paramotor BackPack XXS 2 |
1 x | Motor DLE 200cc Std |
1 x | 18m Fitting barb |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Silent-blocks DLE 170M |
2 x | LUCAS pilot ARTF |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Oracover Green10 m |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
5 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | 22m Fitting barb |
1 x | TX 250 mW especial GOPRO |
3 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Aramid 50 daN 50 m |
6 x | Me-163 |
2 x | SAITO FG-36 carburetor |
2 x | Propeller MEJLIK 32x12 EVO |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
2 x | Support 45% Hopper JetsMunt |
2 x | Propeller MEJLIK 22x10 |
1 x | METEOR 1.000 mm kit |
2 x | Suction funnel for carburetor 90D-L (red) |
1 x | FESTO connector M7 barb fitting 6mm |
3 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 1000 ccm complete gasoline fuel tank |
2 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
3 x | T- Fittings blue color (2pcs) |
2 x | 500 ccm complete gasoline fuel tank |
1 x | Captador OS GT 33 cc |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Antiaircraft gun 3.7 cm (5 pcs) |
1 x | BEC 3A FOXY |
1 x | Hose clips 6 mm |
1 x | Propeller MEJLIK 18x8 CFK |
2 x | Fuel Fittings-Red |
1 x | Gasket set DLE-30 |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | 5 mm gas motor standoff |
1 x | Servo FUTABA BLS 272SV |
3 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | TopFuel LiPo 35C-X 5000mAh 6S |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Blade holder metal LAMA |
2 x | Refueling Cup V2 Red |
1 x | Excentric gearbox for 3,2mm axis (3,0:1) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | 4 LiPo XH>EH adapter |
2 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
3 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Motor DLE 430 cc - Paramotors |
1 x | STD excentric gearbox for 2,3mm axis (4,1:1) |
2 x | Windsock Ozone L - 700 mm |
1 x | Quick hose connector 6-4 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Servo DITEX EL0510M |
1 x | STD excentric gearbox for 2,3mm axis (3,5:1) |
1 x | 2 LiPo XH>EH adapter |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Regulador NAVY 540R |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Quick hose connector 4-4 mm |
1 x | Opale Rucksack |
1 x | TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017 |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
2 x | DLE 85/111/120 Crankshaft keyway |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | FESTO connector M5 Quick 4 mm |
1 x | Cable video GoPro |
1 x | Excentric gearbox for 2,3mm axis (3,0:1) |
1 x | STD excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Dia. 16x35 mm PTFE tube for escape |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | 30x14 prop Super Silence |
1 x | "Taxi Tank" Fuel Tank |
1 x | STD excentric gearbox for 2,3mm axis (2,33:1) |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Piston ring for DLE-20 |
1 x | Castrol Oil TTS 1l |
1 x | Simple take for fuel tank |
1 x | Y-Hose connector 4-4-4mm |
1 x | CC 02 |
1 x | Reed valve petal for DLE 170M |
1 x | Pendulum glow tank |
2 x | Piston ring for DLE-55/111/222 |
1 x | 10 mm gas motor standoff |
1 x | Muffler DLE 20 |
2 x | Male Prolonger TP 4/5S |
1 x | 22x10 prop Super Silence |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Propeller MEJLIK 23x8 CFK |
2 x | Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180 |
1 x | Refueling Cup V2 Blue |
2 x | Piston ring for DLE-20 RA |
3 x | Pine wood slat 10x10x1000 mm |
1 x | KWIKFILL FUELING VALVE GLOW |
1 x | Fishing boat Jule Fischkutter |
1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
1 x | FESTO connector M7 Quick 6 mm |
2 x | bavarianDEMON USB cable |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Carburator joints for SAITO FA80/80GK/72/72GK |
2 x | Servo HITEC HS-7954 SH Digital High |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | DLE 55 Muffler |
2 x | BALSA triangular 15x15x1000 mm |
1 x | DLE 55 carburetor |
1 x | 700 ml complete glow fuel tank |
1 x | SPARK Switch 5.9v |
1 x | Paramotor Trike XL |
1 x | Short Switch On/Off micro |
2 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | Parachute P4 |
1 x | 550 cc gasoline fuel tank complet |
1 x | JETImodel SINGLE BEC |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | T-Hose connector 4-4-4mm |
1 x | Kerosene valve EVO Jet |
1 x | Lipo GENS Soaring 3300 mAh 2s 7.4v 30C |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Hot Glue Stick GREEN |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Propeller Pleg CAM Carbon 20x12 |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
4 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | COMFORT MOUNT ø 25 mm |
1 x | Dia. 28x15 mm PTFE tube for escape |
1 x | Sparkplug DLE CM6 |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Propeller balancer |
1 x | DJI Mavic Air Fly More Combo |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
2 x | Tube holder |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Connector Sub-D 2+5 Male |
1 x | Ring 320 mm length (5 pcs) |
1 x | Tank gas KUZA 500 cc |
1 x | DLE 111 Carb gasket (V1) |
1 x | Antenna holder bracket double |
1 x | ESC 40A. Opto starter Kolm |
1 x | Marker ties (20 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Extension Arm for Carburetor (red) |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | USB interface ALTIS |
1 x | Reed valve petal for DLE 111 |
1 x | Angle of incidence meter |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Spark plug cap DLE 55 / CM6 |
1 x | Field folding model stand |
1 x | Surface Indicator Gauge Small |
1 x | Exhaust gasket Valach 85 |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Dremel 3000 130W |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
2 x | SBEC 30 D |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Fuel line plugs (Red) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Electronic fog horn |
2 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
1 x | Hub DLE 30 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Tank gas KUZA 260 cc |
1 x | Parachute PV6 for F3J |
1 x | Universal Filter |
1 x | 27x10 prop Super Silence |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Fuel Fittings-Blue |
1 x | Ball Link Plier |
1 x | Motor A20-20 L EVO |
1 x | Propeller MEJLIK 16x11 3 Blades |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
1 x | UBEC 6A KAVAN |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | 290x4 mm M4 shaft ship |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Rangefinder 39x20 mm (2 pcs) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | DPSI Ampere battery backer |
1 x | KIRA 480-38 5,2:1 |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | 28x10 BIELA propeller |
1 x | Copier 2x20 cm pcs |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | Gearbox KPG25 4,2:1 |
1 x | ZENOAH G270RC |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
1 x | KIRA 600-20 6,7:1 |
1 x | Motor A50-12 L V4 |
1 x | Stainless Steel Bend D 18x0,5 mm |
1 x | Cut tube |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | FESTO connector 1/8 Quick 6mm 90º |
2 x | FESTO connector M7 Quick 6mm 90º |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
2 x | Canister combo DLE 111 cc |
1 x | Small Crow DLE-170M |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
2 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Propeller APC 11x8.5 Electric |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Allen wheel collar M3x5 |
1 x | DLE-55RA Ignition unit |
1 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | FESTO connector M7 Quick 4mm 90º |
1 x | PYRO 800-40 Long Axi |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | Quick hose connector 4-4 mm |
1 x | Planetary gearbox(3,8:1) |
1 x | Micro control horn (2 pcs) |
1 x | Carburetor DLE 170M |
1 x | FESTO connector M7 Quick 4 mm |
1 x | Neoprene tube 7,5x3,5 mm (1 m) |
1 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Magnetic Interruptor MULTIPLEX |
2 x | Extension silicon 75 cm (Graupner) |
1 x | Plastic wheels 28 mm (2 pcs) |
1 x | Spannlack 1000 ml |
1 x | Oils Pumps Empty (1 liter) |
1 x | Spark plug key NGK MVVS |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Canister combo DLE 120 cc |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
2 x | Dust collector for mould cleaning |
2 x | Cabel "Y" 30 cm (Futaba) |
1 x | TS832 to Gopro AV/Power Cable |
1 x | Plastic wheels 36 mm (2 pcs) |
1 x | Pitts Muffler for D.A. 120 |
1 x | Horn mando small (2 pcs) |
1 x | KIRA 480-34 5,2:1 |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
1 x | Esc X-75-OPTO-Pro |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | EWC6 40 cm wing connector |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 25 mm Sandpaper file |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Servo Mount M (blue) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Motor A30-12 L V4 |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Motor A20-26 M EVO |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Connector CAN 15 |
1 x | Muffler DLE-120 Left |
1 x | CC 05 |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Propeller APC 12x8 SF |
1 x | ZG231cc SHL |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | DLE 55 Ignition unit |
1 x | Yellow smoke canister 65 g |
1 x | Cylynder DLE 20-RA |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Conector FUTABA Servo female (10 pcs) |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
2 x | 30 cm MULTIPLEX female connector |
1 x | Conector XT-30 (macho) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Conector BEC male (10 pcs) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | 30 cm DEANS female connector |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Conector Servo female 4 pines |
1 x | Conector MR-60 (pareja) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
2 x | Circlick securite |
2 x | Extension silicon 25 cm (Futaba) |
2 x | Extension 30 cm (Futaba) |
1 x | Premium servo extension 100cm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension silicon 75 cm (Futaba) |
2 x | Extension silicon 50 cm (Futaba) |
2 x | Strip 2,0x2,0x330 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 1,0x1000 mm |
2 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | Round Rod 5,0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
3 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | Straightened threaded rod M2-1m |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Oracover CARBON Metalic 1 m |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Initior Receiver FRX2 Wireless |
2 x | MPX Sub-D Adaptor |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | MPX Support |
2 x | XT-60 connector (female) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Soldering PCBs 8pin, 5 pieces |
3 x | XH female balance (8S) connector (2 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | PIN Connector female (100 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Extension silicon 10 cm (Futaba) |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Extension 15 cm (Futaba) |
1 x | Futaba Female 40 cm extension |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Extension silicon 35 cm (Futaba) |
2 x | Battery voltage telemetry |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
2 x | Propeller Pleg CAM Carbon 16x13 |
1 x | Propeller Pleg CAM Carbon 10x12 |
1 x | Propeller Pleg CAM Carbon 11x7 |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
2 x | Adjustable launching hook |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Birch plywood plate 600x300x4.0 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
2 x | XT60 Connector with Holder Male 2pcs |
1 x | XT-90 connector (pair) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Servo Connector Brackets (10 pcs) |
1 x | Optotronix Aurora Plug |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Jeti Black cap |
1 x | Fixed launching hook |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | Race 650 Johnson motor 7.2v |
1 x | OSD Telemetry sensor |
1 x | Race 300 |
1 x | Towing hook |
1 x | Race 280 |
1 x | LOWER TOW HOOK |
1 x | SERVO HOLDER |
1 x | Motor class 400 + gearbox 1,86:1 |
1 x | Motor class 550 + "M" gearbox 2,85:1 |
1 x | Race 600 |
1 x | Towing hook |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Mould Resin P 10 kg |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | Thread locker "Medium" 10 g |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Debonder UN - CURE™ (30g) |
1 x | White gelcoat 1 Kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | ExtraCA Top |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Round Rod 2,5x1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | NoNa BB wheel Ø105x35mm in pair |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Crystal TX 35.100 Ch 70 |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Crystal Universal RX 35.030 Ch 63 |
![](images/pixel_black.gif) |
28,867.20EUR |