1 x | Ferrita 27x14x7 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Round Rod 4,0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
2 x | Round Rod 1,25x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
2 x | Round Rod 2,0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Strip 2,5x1,25x330 mm |
3 x | Round Rod 6,0x1000 mm |
3 x | Strip 2,0x2,0x330 mm |
4 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | 2,5x60 mm allen screwdriver |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | 1,5x50 mm allen screwdriver |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | 2,0x50 mm allen screwdriver |
1 x | Cut tube |
1 x | Hot Glue Stick GREEN |
2 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
2 x | Hot Glue Stick BLACK |
1 x | Ball Link Plier |
1 x | Hot Glue Stick RED |
1 x | DYNAMOMETER S-1580 |
3 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Long pinned hinge (6 uds) |
1 x | Medidor ángulos y/o incidencias |
4 x | Miniature brass strap hinge, 1 m |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Flap hinge (6 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | LASER 73" 1.85m (05) PILOT |
2 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Solvent Plasti Dip 1000 ml |
1 x | XH female balance (2S) connector (2 pcs) |
2 x | Ferrita con funda |
1 x | Carbon fiber rod 14 mmx1000 mm |
2 x | Support FUEL DOT V3 |
3 x | Aro pasacable Ø25 mm (4 pcs) |
3 x | Support Filtro FESTO |
2 x | Mold plugs XT-30 |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
2 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
2 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Propeller diller for DLE111 and DA85-150 |
2 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | 5 LiPo XH>EH adapter |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Sealing Iron Sleeve STD |
2 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Z Bender - S Type Tool |
1 x | Tube bender |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Mobile Terminal |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Steel brush wheel with 2.35mm |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
2 x | 120x60 mm SLH KOVO wheel |
1 x | Strip 3,5x1,75x330 mm |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Micro flex hinge (12 uds) |
2 x | 18 mm reinforced hinge |
2 x | 25 mm reinforced hinge |
2 x | 15 mm reinforced hinge |
3 x | Small pinned hinge (12 uds) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | USB Interface Adapter |
1 x | Medium pin type hinge (12 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Small pinned hinge (6 uds) |
1 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | WingFix ULTRA Black Edition |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Angle measurer |
1 x | Surface Indicator Gauge Small |
1 x | Indoor hinge with servo arm integraded |
1 x | Pin hinge 26x11 mm (10 uds) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Support ECU Xicoy X-45 |
2 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support pump Xicoy X45 |
1 x | 3 mm Leader (L 100 mm) |
1 x | 10 mm Prop Adapter M12 |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 15x7 tree blades propeller LEFT |
1 x | 2,3 mm Prop Adapter M6 |
2 x | Soporte grifo FESTO (2 pcs) |
2 x | Tube support Ø 6mm (10 pcs) |
3 x | Soporte filtro FESTO (4 pcs) |
2 x | Support conector MPX (6 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Support XT60 conector (2 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | 3,2 mm Prop Adapter M8 |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | 29,0 mm propeller (left propeller) |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | 1000 ml sealer (DOPE) |
1 x | 15x7 tree blades propeller |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 11x7 tree blades propeller |
1 x | 12x8 tree blades propeller |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Oils Pumps Empty (1 liter) |
1 x | Digital precision scale up to 2000 g |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Kwik link unmount tool |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Propeller diller 5/6,3/8/9 |
1 x | Sub-D Plug Mold |
1 x | 100g Flux Paste for Silver Solder |
1 x | Heli blades angle measurer |
1 x | Handle for PERMAGRIT lime |
1 x | Servo SAVOX SW-1250 MG digi |
1 x | Servo HITEC HS-325 BB |
1 x | Servo SAVOX SV-1270 TG |
1 x | Propeller Pleg CAM Carbon 11x5 |
1 x | Propeller Pleg CAM Carbon 12x8 |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | Z Bender - S Type Tool |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Xplorer1 anemometro |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | PRO-HV Dual Action Valve |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Motor OS FS 75 AX |
1 x | Oracover Black 10 m |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | Heli blades angle measurer |
1 x | XT-60 Plug Mold |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Propeller diller for DLE170 |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Mini-handed clamp |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Dremel PERMAGRIT thin lime |
1 x | MPX 8 pins plug mold |
1 x | Rubber Insert soft, 1 Pcs. |
1 x | Precision wrench L100 mm |
1 x | Servo FUTABA BLS172 SV |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Servo FUTABA SBL 471 SV |
1 x | Servo HITEC HS-125 MG |
1 x | Servo SAVOX SV-1261 MG |
1 x | Servo HITEC HS-485 HB |
1 x | Servo FUTABA BLS175 SV |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Servo HITEC D145 SW |
1 x | Futaba BLS152 - Upper Case |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Futaba 30 mm servo rounded arm |
1 x | 16mm Gear-Spotlight, 4W |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Propeller APC 10x6 Glow/Gas |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Propeller APC 8x4 Glow/Gas |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | Motor OS MAX 120 AX |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Tygon DUBRO Medium 15m |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Deposito DUBRO 3000cc-100oz |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Refueling Cap V3 Black |
1 x | Propeller APC 12x8 Glow/Gas |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 20 mm carbon horn |
1 x | Support Pitot JETI |
|
7,215.10EUR |