3 x | Servo JETI DSHV 3D13T (13 Kg) |
3 x | Round Rod 1,0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
3 x | Strip ABS 2.0x3.0x1000 mm |
2 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
2 x | ABS Strip 1.0x2.0x1000 mm |
2 x | ABS Strip 1.5x8.0x1000 mm |
2 x | ABS Strip 1.0x3.0x1000 mm |
3 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Ferrita 27x14x7 mm |
1 x | 1/12 Pilot "Cougar" |
2 x | Gear for D 200 BX |
1 x | Ferrita 17x10x6.5 mm |
3 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Ferrita 14x8x5.5 mm |
2 x | Gear for D 54 |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 1/4 Pilot "Heidi" |
2 x | 1/6 Pilot "Garry" |
1 x | 1/7 Pilot "Japanese" |
2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | 1/12 Pilot "Fighter" |
1 x | 1/6 Pilot "Tony" |
3 x | 1/4 Pilot "Mike" |
1 x | Piloto JET 1:3,5 |
2 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | 1/12 Pilot "Tom" |
2 x | Pilot "Dick" Legends Series (Slimline) |
3 x | Pilot "Goose" (Slimline) |
1 x | Ferrita con funda |
2 x | Piloto Jet "Red" 1/6 Scale |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | Cockpit plastic closing |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Locking cable tie 2.5x100 (uds) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Canopy Latch |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | One touch canopy lock |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | 57 mm micro-mini servo cover |
1 x | Hot Glue Stick BLACK |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
2 x | Servo BLUE Bird BLS-H71B v2 |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Round Rod 1,25x1000 mm |
3 x | Round Rod 4,0x1000 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
2 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
2 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
2 x | 1/12 Pilot "Langley" |
2 x | Servo Dymond D 37 Eco |
1 x | Balsa panel 10x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Servo Connector Brackets (10 pcs) |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Connectors MPX black male |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Connectors MPX black female |
1 x | Conector XT-30 (hembra) |
1 x | XT-60 connector (male) |
1 x | Mounting frame MPX male connector |
2 x | TAKEO 3.6m electric |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Pilot "Duke" Legends Series (Slimline) |
2 x | Gear for MICRO BB |
2 x | Piloto jet 130 mm |
2 x | Pilot JAN 1/4 Saiplanes |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Landing gear frontal support 25x32x16 |
1 x | Cockpit aluminium closing |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
3 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
2 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Adapter 5,0 mm M8 |
2 x | Servo arms set 40/50/55/5055 MG |
2 x | 25 mm carbon servo arm |
1 x | Servos security connector (2 pcs) |
1 x | 2 mm Prop Adapter M5 |
2 x | Allen wheel collar M3x3 |
2 x | Adapter 4,0 mm M6 |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Allen wheel collar M4x4 |
1 x | Adapter 3,0 mm M8 |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | 12 mm dogdrive props |
2 x | 3,2 mm Prop Adapter M5 |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
2 x | Adapter 3,2 mm M8 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | |
1 x | Adapter 3,0 mm M6 |
1 x | 6 mm Prop Adapter M8 |
2 x | 2,3 mm Prop Drive Günther M4 |
2 x | 5 mm Prop Adapter M8 |
1 x | 5 mm Prop Adapter M6 |
1 x | Adapter 3,2 mm M6 |
1 x | |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | MPX Support (2 pcs) |
1 x | Connectors MPX female |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Gold antispark 4 mm plug |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | MPX Sub-D Adaptor |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Conector Servo female 4 pines |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Conector BEC female (10 pcs) |
1 x | Q-12 2000 mm Electric |
2 x | Astra (Top Model) |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 58 mm micro servo cover |
1 x | Electric Landing Gear Trainer Jet Intro |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Fast attachment for servos (25 pcs) |
1 x | Round Rod 6,0x1000 mm |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Ply-Span 450x600/13g Orange |
1 x | Ply-Span 450x600/13g Red |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Optotronix Aurora Plug |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Ply-Span 450x600/13g Blue |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | GRAFAS MAXI ARF |
1 x | Gracia Maxi ARF (Top Model) |
1 x | Gracia (Top Model) |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | GP 15 JETA |
1 x | 1/10 Pilot "Jack" |
1 x | Electric Landing Gear GALEB G4 |
1 x | Pilot "Anthony" (Slimline) |
1 x | 1/6 Pilot "Cindy" |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | 1/6 Pilot "John" |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | 13 mm wing servo holder |
1 x | 18 mm wing servo holder |
1 x | F-16 Falcon Black Knights 1:6 (1630 mm) |
1 x | Bidule 170 ARF 3.48 m |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
1 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Micro control horn T2 Ø 1 |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Nylon threaded block M5 (2 uds) |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Cable control set |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Pick up DA50/100/150 |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Spring Clip Ø25 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Micro clevis (10 uds) |
1 x | Long ball link M3 (6 uds) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Aluminium servo arm (2 uds) |
1 x | Metal gear set for HS81MG/5082MG |
1 x | MIG 29 3D RTF, Servo |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | Landing gear strap small (4 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Adapter 4,0 mm M8 |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Nut for mounting M3 (4 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Medium pin type hinge (12 uds) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Motor holder for AC 28/7 |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 4 mm Prop Adapter M6 |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
|
24,382.47EUR |