2 x | Round Rod 2,0x1000 mm |
2 x | Strip 2,0x2,0x330 mm |
3 x | Strip ABS 2.0x10.0x1000 mm |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
3 x | Gates hinge black 30x16 mm (2 pcs) |
4 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Bird (Aero-naut) |
2 x | Round Rod 6,0x1000 mm |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Medium pin type hinge (12 uds) |
3 x | Vest clothes Hispano Aviación |
1 x | Servo MKS HV6130 |
2 x | Mini AVANTI S EDF 80MM RTF |
1 x | Avanti S 1.8m Jet White/Blue |
2 x | ABS Strip 1.5x6.0x1000 mm |
3 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Me-163 |
2 x | Round Rod 3,0x1000 mm |
1 x | Servo SAVOX SV-1270 TG |
1 x | Spark Plug BRISK M14x1.25 |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | Glases Innovation Plus |
1 x | MIG 29 EDF |
1 x | Piston ring for DLE-20 RA |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
2 x | Canister combo DLE 55 cc |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Small pinned hinge (12 uds) |
1 x | 5 line servos wire black (1 m) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Muffler for Titan ZG 26SC/EI |
1 x | Cylinder ZG 26SC/SLH |
1 x | Glases Nimbus "Black" |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | IKARUS plane |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Strip ABS 2.0x3.0x1000 mm |
2 x | resin-hardener L-385 H-385 (1250 g) |
3 x | 12x8 tree blades propeller |
1 x | L ELBOW DA-120 long (2 pcs) |
1 x | Propeller MENZ-S 19x12 |
1 x | Propeller POWER-PROP 12x6 |
2 x | 500 ml sealer (DOPE) |
1 x | Propeller MENZ-S 32x14 |
1 x | Propeller APC 13x10 Electric |
1 x | Propeller Pleg Glass-Fiber white 15x9.5 |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
3 x | Cylinder for DA-60 and DA-120 |
1 x | Fuselage Autogyro RAINBOW |
4 x | Softshell Hispano Aviación |
1 x | 3 blades set |
1 x | Blade Holder Full (4 blades) |
1 x | 4 blades set |
4 x | Blade Holder (3 blades) |
1 x | Hot Glue Stick RED |
1 x | Support Pitot JETI |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Support XT60 conector (2 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
3 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Black large kwik link (10 pcs) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | ABS tube 7.0x5.0x1000 mm |
2 x | Nitroverdu 500 ml |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 1/12 Pilot "Cougar" |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
2 x | Profile ABS Square 1 x 1000 mm |
1 x | Green silicone 0,25 mm² wire (25 m) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Spray adhesive AEROFIX 2 |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Cable coupler M2 (10 uds) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Strip 1,5x1,5x330 mm |
2 x | Release wax 250ml |
2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Rubber profile 6-2 mm 2M |
1 x | 1/6 Pilot "Buddy" |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
3 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | 25 mm reinforced hinge |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Propeller balancer |
1 x | Futaba Female 40 cm extension |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
3 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Initior Receiver FRX2 Wireless |
1 x | "S" set for boats |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Blue smoke canister 100 g |
1 x | Red smoke canister 65 g |
2 x | White smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | "M" set |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | White smoke canister 140 g |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Lead with adhesive (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Angle support XT60 conector |
1 x | Blade holder center |
1 x | PowerBox Competition SR2 |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Extension for LC-Display 50cm |
2 x | Chopped glass fibre strands 3 mm |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | PowerBox MERCURY SR2 |
3 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Hobbylite Filler, Balsa colour |
3 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | Strip 3,5x1,75x330 mm |
2 x | ABS I Strip 10x5x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Sprung retractable undercarriage (Alfa model) |
2 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ANGEL 48" pp red/blue/white |
1 x | EXTRA NG 85" 2159mm red/white |
1 x | SLICK 360-B 104" (2640 mm) |
2 x | XPower XC5030/14 LS |
1 x | Medidor ángulos y/o incidencias |
2 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Pin hinge 39x20 mm (10 uds) |
2 x | Pin hinge 26x11 mm (10 uds) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | PowerBox PIONEER incl. microSwitch |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Propeller CFK 20x13 |
1 x | Propeller CFK 12.5x6.5 |
1 x | Propeller CFK 14x8 Slim |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | Propeller CFK 12.75x13 |
1 x | Propeller CFK 14x10 |
1 x | Propeller CFK 15x15 |
1 x | ABS 500 x 400 x 2,0 mm (white) |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | BlueCom™ Adapter (Android / WP) |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Propeller CFK 14.5x10 Slim |
1 x | External LED's (2 pcs) |
1 x | Extension for SensorSwitch 30cm |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
2 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | |
2 x | FALCON 24X9 CARBON PROPELLER (GAS) |
2 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | PRO-HV Dual Action Valve |
2 x | Propeller FALCON 5-BL 24x23.5 |
2 x | Hose connector stopper 4 mm |
2 x | Spray Graphit 33 |
5 x | Ferrita 14x8x5.5 mm |
1 x | Air pressure gauge |
2 x | Manometer 4 mm |
2 x | Paint gun for sprays |
3 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Partall paste 650 g |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
2 x | FALCON 24X10 CARBON PROPELLER (GAS) |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Universal Colour Paste deep black 250 g |
2 x | FALCON 27X11 CARBON PROPELLER (GAS) |
2 x | Solvent Plasti Dip 1000 ml |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Spannlack 1000 ml |
2 x | 40 mm air cylinder |
1 x | Strip ABS 2.0x5.0x1000 mm |
2 x | Round Rod 1,5x1000 mm |
2 x | Extractor piñones 2.3/3.2 mm |
1 x | Cap Hispano Aviación |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
2 x | Round Rod 1,25x1000 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Strip 2,5x1,25x330 mm |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Round Rod 5,0x1000 mm |
2 x | Round Rod 4,0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Retract undercarriage |
2 x | Ferrita 27x14x7 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
2 x | XPower XC3522/5 LS |
1 x | EXTRA NG 85" 2159mm yellow/blue |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | MIG AC 400 /14 |
2 x | EDGE 540-A 105" (2660 mm) |
1 x | ANGEL 48" pp orange/black/white |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Motor XPower F2915/12 XLight |
1 x | ARS 300 91" ARF 2311mm ORANGE |
1 x | LASER 260 60" V2 ARF Red (SkyWing) |
2 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
2 x | 18 mm reinforced hinge |
1 x | Miniature brass strap hinge, 1 m |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Mudguard for 140/165 mm wheels |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Round flex hinge (12 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Pin hinge 34x16 mm (10 uds) |
1 x | Small pinned hinge (6 uds) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Digital precision scale up to 2000 g |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Extension silicon 25 cm (Graupner) |
1 x | 2,5x60 mm allen screwdriver |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Copier 5x20 cm pcs |
2 x | Balsa panel 8.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
2 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | 3l Smoke oil |
1 x | Short ball link M2 (6 uds) |
1 x | Ball link M2 (10 pcs) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | AX-60 starters (5 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Yellow smoke canister 100 g |
1 x | Red smoke canister 140 g |
1 x | Screws M1,6x6 Allen |
1 x | Joint with bearing M3 22x5,5 |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Ball link M3 (6 uds) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Bidule 170 ARF 3.48 m |
1 x | Canopy Sweet / Siesta |
1 x | Trailing leg 131 mm |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Flap hinge (6 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Balls 4 mm |
1 x | Autogyro Cierva C30 Spain |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Motor Mega AC 22/30/02 |
1 x | 18 mm wing servo holder |
1 x | Astra wing Joinner (Top Model) |
1 x | 11 mm wing servo holder |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Carbon plate 350x150x2.0 mm |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Baal link 4/14/4 (5 pcs) |
1 x | Cierva C30 Body Spain |
1 x | LA500 housing-upper cyclic |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | Motor Mega AC 16/07/03 |
1 x | Motor Mega AC 22/20/03 |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Mini neumatic retract landing gear |
1 x | Round Rod 1,0x1000 mm |
1 x | BULLIT Wing 1095 mm |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Bidule 55 2460 mm Cabina |
2 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | BULLIT Wing 840 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Albatros red/white (Top Model) |
2 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Premium servo extension 100cm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Styrene plate 320x120x0.5 mm |
2 x | Vacuum bag, 1200 mm x 50 m |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Release film 100 cm x 50 m |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | LA500 rotor head core |
1 x | LA500 freewheel bearing |
1 x | LA500 front gear holder |
1 x | LA500 rotor head shaft |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | LA500 Blades |
1 x | Blade holder upper |
1 x | Propeller FALCON 27x10 3-BL carbono-gas |
1 x | Spray EC Red 400ml |
1 x | Head core |
1 x | Baering 3x8x4 |
1 x | Motor OS 3820-1200 electric |
1 x | LA500 Autogyro |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | 20 g tin paste |
1 x | 1/12 Pilot "Fighter" |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Ferrita 17x10x6.5 mm |
1 x | Ferrita con funda |
1 x | Motor Mega AC 22/45/03 E |
1 x | Motor Mega AC 16/07/12 |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Motor Mega AC 16/25/04 |
|
50,736.38EUR |