1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Vacuum bag, 1200 mm x 50 m |
3 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Cap Hispano Aviación |
1 x | MPX-Dean "T" Adapter |
2 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Round Rod 2,0x1000 mm |
2 x | Transmitter Balancer SPK DX-8 |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Actuador lineal HLS12-100210-7.4v |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | PowerBox PROFESSIONAL |
1 x | Fiberglass plate 620x540x0,2 mm |
2 x | Carbon plate 1000x500x2,0 mm ECOTECH |
2 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Compact on-board starting system (9713) |
1 x | T- Fittings blue color (2pcs) |
1 x | Selfstarr EME35 |
1 x | Recess mount-rem. glow plug set |
1 x | FESTO connector M7 Quick 4mm 90º |
1 x | Propeller diller for EME35 and DLE35 |
1 x | 2 mm Prop Adapter M6 |
2 x | Tacometer mini ignition RCEXL |
2 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 500 ccm gasoline fuel tank |
1 x | DLE Ignition unit |
1 x | Ignition bed V2 Red color |
1 x | Fuel Fittings-Blue |
1 x | Propeller diller for DLE170 |
1 x | Starter EM Gear Power 250 |
1 x | Stickers-digit for marking |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | ABS tube 9.0x8.0x1000 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Quick hose connector 4-4 mm |
1 x | Filler Gauges |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Electromotor starter EME 35cc |
1 x | "Taxi Tank" Fuel Tank |
1 x | 15x7 tree blades propeller |
1 x | Quick hose connector 3-3 mm |
2 x | Ball Bearings for motor A60-V2 |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | RCEXL Electronic ignition twin CM-6 |
2 x | FESTO connector M7 barb fitting 6mm |
1 x | Compact on-board starting system (9715) |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | Sparkplug Saito 400 |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
2 x | Styrene plate 320x120x1.0 mm |
1 x | TMM 1210-3S heli |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
2 x | Foam plastic plates (310x210x3 mm) |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Extension for SensorSwitch 30cm |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Mobile Terminal |
2 x | PowerBox DigiSwitch V2 MPX/JR |
2 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Battlife Guard 2s |
1 x | Charging Extension 50cm for 2 Battery |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
3 x | Receptor FUTABA R7003SB FASST |
1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
1 x | R617 FS 2,4 GHz receiver |
2 x | Receptor MINIMA 6S HITEC |
1 x | Tray for FUTABA 18 SZ |
1 x | Support ECU Xicoy X-45 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Support Filtro FESTO |
1 x | Angle support XT60 conector |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
2 x | TX-Tray V1 (L) (Red) |
3 x | Transmitter Stick Ends V3 Red - M3 (2 pcs) |
3 x | Transmitter Stick Ends V4 Blue- M3 (2 pcs) |
1 x | Futaba Radio Case |
4 x | Transmitter Stick Ends V5 Blue - M4 JR/DX7 |
2 x | TX-Tray V1 (L) (Black) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
4 x | Crystal TX 35.050 Ch 65 |
4 x | Crystal TX 35.150 Ch 75 |
1 x | Crystal TX 35.100 Ch 70 |
2 x | Crystal RX 35.120 Ch 72 |
1 x | Crystal TX 35.010 Ch 61 |
2 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
2 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
2 x | |
2 x | Receiver Crystal 35 Mc/s Ch 62 |
2 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | Receiver FUTABA R6004 FF FAST |
2 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
2 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
2 x | Futaba R3006SB T-FHSS 2.4GHz |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Support Pitot JETI |
1 x | Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support XT60 conector (2 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
3 x | TX Tray V1 Hand Rests only |
3 x | Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2 |
1 x | Support FUEL DOT V3 |
2 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
1 x | Support conector MPX (6 pcs) |
2 x | Soporte grifo FESTO (2 pcs) |
2 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
2 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
1 x | Support pump Xicoy X45 |
2 x | Antenna holder bracket double |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Transmitter Balancer Futaba V |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Transmitter Balancer Futaba T-10CG |
2 x | Tray for FUTABA 14SG/16SZ |
2 x | Transmitter Stick Ends V2 Red - M3 (2 pcs) |
3 x | Transmitter Stick Ends V5 Rojo - M3 Futaba/Hitec/Spektrum DX8 (2 |
2 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
2 x | ABS tube 3.0x2.0x330 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Fiberglass plate 350x150x1.0 mm |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | 20x15 Falcon electric V2 |
1 x | Capstan of plastic 125x72x45 mm |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Spinner propeller pleg. 28 mm/5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Avia (Top Model) |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | 90x60 mm standart servo cover |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | FESTO Filter 4 mm |
1 x | Quick hose connector 4-4 mm |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 2 LiPo XH>EH adapter |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | PowerBox iGyro 1e |
1 x | Power Box GPS Sensor III |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Carbon plate 350x150x0.5 mm |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | TMM 2512-3S heli |
1 x | Turbo light spinner cap white 32mm |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
1 x | Angle of incidence meter |
1 x | Adjustable launching hook |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Oratex Yellow Cub 10 m |
1 x | ARTIST 1.560 mm |
1 x | 65 mm mini servo cover |
1 x | Bidule 111 3000 mm |
1 x | |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Albatros red/white (Top Model) |
1 x | 57 mm micro-mini servo cover |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Secraft Fuel system v2, red color |
1 x | Servo Mount S (red) |
1 x | Servo Mount M (blue) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Motor mount M |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Receiver bed (Blue) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | 35 mm gas motor standoff |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | FESTO connector M7 Quick 4 mm |
1 x | 40 mm gas motor standoff |
1 x | FESTO Filter 6 mm |
1 x | Fuel dot red |
1 x | Fuel Dot for Glow/Gas conversion DUBRO |
1 x | DLA 116 crankshaft |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Cable Cargador FUTABA |
1 x | BlueCom™ Adapter (iOS) |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | External LED's (2 pcs) |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | PowerBox iGyro SRS |
1 x | DPSI V-Match |
1 x | PowerBox PowerExpander SRS |
2 x | Fiberglass plate 350x150x1.5 mm |
2 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Chopped glass fibre strands 3 mm |
1 x | Two-function control switch + button by FUTABA |
1 x | Micro Crystal RX 35.080 Ch 68 |
1 x | Crystal TX 35.180 Ch 78 |
1 x | Cianocrilato MD GEL 454 tube 20g |
2 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | Receptor FUTABA R7006SB FASSTest/FASST |
1 x | Three-function control switch by FUTABA |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Motor mount EDGE 540 48" |
1 x | Motor mount VANQUIST 48" F3A |
1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | Extension for LC-Display 50cm |
1 x | PowerBox iGyro SRS + GPS Modul |
1 x | PowerBox Evo |
1 x | PowerBox 12 |
1 x | MicroMatch PowerBox |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Chopped glass fibre strands 3 mm |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Glass fabric 25 g (2 m²) |
2 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Film release agent PVA 25 ml |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | KAVAN CA Activator 150ml |
2 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | Ciano KAVAN Thin 20g |
1 x | Ciano KAVAN Thick 20g |
1 x | Ciano KAVAN Super Thin 20g |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Transmitter Stick Ends V1 Silver - M3 (2 pcs) |
1 x | Logo 400 SE VBar |
1 x | Micro Crystal RX 35.070 Ch 67 |
1 x | Micro Crystal RX 35.890 Ch 189 |
1 x | Crystal RX 35.020 Ch 62 |
1 x | Extender tip (6 pcs) |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | CA Glue fast 20g |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | Crystal RX 35.050 Ch 65 |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | R6106 HF 2,4 GHz receiver |
1 x | Receiver R7008SB FASSTest |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Receiver CORE PBR-26D 26ch |
2 x | Suncover 100cc Red |
1 x | EXTRA 300 78" V3 Yellow/Red/Blue |
1 x | EXTRA 330SC-E 95" Orange/Blue/White |
1 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | Motor mount class 48" |
|
25,124.69EUR |