3 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Gates hinge |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
3 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | CC 01 |
2 x | Adapter lead MPX/XT60 |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
3 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
4 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Small pinned hinge (12 uds) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | 30 cm BEC cable (male) |
2 x | 5 LiPo XH>EH adapter |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Long pinned hinge (12 uds) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
3 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | CM-3 |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
4 x | 3 LiPo XH>EH adapter |
2 x | Large flex hinge (12 uds) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
3 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
3 x | USB HLS prog. interface |
3 x | BEC 3A FOXY |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
3 x | Circlick securite |
3 x | Adapter lead MPX/EC3 |
1 x | Profile ABS half cane 2.5x1000 mm |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | 18 mm reinforced hinge |
3 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Flap hinge (6 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | CC 02 |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | MPX-Dean "T" Adapter |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | CC 03 |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | 4 LiPo XH>EH adapter |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
3 x | 2 LiPo XH>EH adapter |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | Dean "T" - Futaba Adapter |
3 x | TrainerCord (master-learner) |
2 x | GameCommander USB Universal |
3 x | Simulador RealFlight RF-9.5 S (sin emisora) |
2 x | Slave-cable USB Easy Sim |
1 x | Interface Jack Adapter IKARUS |
1 x | Ferrita 27x14x7 mm |
2 x | Round Rod 2,5x1000 mm |
3 x | Strip 1,5x1,5x330 mm |
2 x | Round Rod 3,0x1000 mm |
3 x | Strip 3,5x1,75x330 mm |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn with ball 40x30 |
1 x | Cable with accesories |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Cable control set |
1 x | Extra long horn 60x30 |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Control horn long w/ball |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | 5 mm M2 variable horn |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 6 mm M3 variable horn |
1 x | 5 mm M2 variable inclined horn |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn 6/35 with M3 Bearing |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 140 mm rods set for direction control |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Motor DLE 170 M- Paramotors |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Oracover CHROME 2m |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Profile ABS Square 4 x 1000 mm |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
3 x | EWC6 40 cm wing connector |
3 x | Long Switch On/Off micro |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
3 x | EWC3 40 cm wing connector |
2 x | Extension 2/3 lipos JST/C |
3 x | Magnetic Interruptor MULTIPLEX |
4 x | Female connector JST SH 1.0mm with 10 cm wire |
3 x | USB interface ALTIS |
1 x | Pin hinge 26x11 mm (10 uds) |
2 x | Male Prolonger TP 4/5S |
2 x | Female connector for 10 pines AWG |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Profile ABS half cane 3x1000 mm |
2 x | PSC 6 |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | SPS Remote switch actuator |
3 x | PowerBox SparkSwitch RS |
3 x | Multi-adapter balancer JST/C - TP |
3 x | SPARK Switch 7.4v |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | 40 mm air cylinder |
1 x | Mini neumatic retract landing gear |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | Nose leg 155 mm with wheels 70 mm |
2 x | SIMtransmitter 6 Mode 2 |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Micro flex hinge (12 uds) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | ABS angle 4,0x4,0x1000 mm |
2 x | ABS Strip 1.5x8.0x1000 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Ferrita 14x8x5.5 mm |
1 x | VPP system propeller for AXI VPP motors (spare) |
1 x | CYCLONE XT 6.2m ARF |
1 x | Fascination 3600 mm ARC |
1 x | Fascination 3600 mm (Top Model) |
1 x | Albatros red/white (Top Model) |
1 x | FOX 3000 mm ARF (FMS) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | SCHARNHORST accessories |
2 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | 12 mm portholes (10 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | 39,0 mm propeller (rigth propeller) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
2 x | Servo slow down unit (0,7-14,7 sec ) |
3 x | DPSI magnetic switch actuator (housing) |
3 x | MPS Gas-Cap-Powerswitch |
2 x | Electronic switch JETI SP6 0-15v/6A |
2 x | SWTU2 switch |
1 x | Opto Gas Engine Kill Switch |
2 x | Switching module high voltage SXH |
1 x | UBEC 6A KAVAN |
2 x | Selfstart electronic switch |
3 x | Hacker X-Pro USB interface V2 |
3 x | JETImodel DPS 40 |
2 x | wing/fuselage connector for 12 pines AWG 20-24 |
2 x | PWC4 wing/fuselage connector for 4 servos |
2 x | JETImodel SINGLE BEC |
3 x | SPARK Switch 5.9v |
3 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
2 x | SBEC 30 D |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
3 x | FX three-position switched channel, long |
3 x | Male connector for 20 pines AWG |
1 x | Electronic switch JETI SP06 Opto |
3 x | Male connector for 16 pines AWG |
1 x | MAX BEC 2 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | SPARK Switch 12v |
2 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | SBEC Jeti |
1 x | Extension 5 lipos JST - JST/C |
3 x | Interruptor RX/Batterie |
1 x | Opto Gas Engine Kill Switch |
2 x | SPS 70V 100/200 A |
1 x | PSC 5 |
2 x | Interruptor SPS 70v 60/120A |
2 x | Extension 5 lipos JST/C - JST |
1 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
1 x | Astra wing Joinner (Top Model) |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | eFuel 30A Power Supply |
1 x | Power supply NT 25 Amp. |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Avanti XS Jet , Tricolore Canopy |
1 x | Propeller Helice 4BL 70 mm M4 plastico Dcha |
1 x | Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Propeller RABOESCH M3 30 mm (4 Blades) (Left hydropropeller) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Skies 2x 335 mm + 1x Esqui 250mm |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Round Rod 1,0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Propeller RABOESCH M4 55 mm (5 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Spray EC Red 400ml |
1 x | COPILOT Multiplex |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | DPSI Ampere battery backer |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Battery charging cable XT60 |
2 x | CC 05 |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Short Switch On/Off micro |
2 x | Female connector for 16 pines AWG |
1 x | Propeller RABOESCH M4 65 mm (4 Blades) (Right hydropropeller) |
1 x | Potenciometro micro |
2 x | Micro Switch button |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | 30 cm BEC cable (female) |
1 x | Servo Tester |
1 x | MPX screwable clips (5 pcs) |
2 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Servo RHINO pro SHV digi 4 |
1 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
1 x | HERON RR |
1 x | GPS V2 Sensor for M-LINK receivers |
1 x | Interruptor On/Off Corto micro |
1 x | FUNRAY RR |
1 x | Support hands Issuer PROFI TX |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | LENTUS RR 3.000mm MULTIPLEX |
2 x | Male connector for 12 pines AWG |
1 x | Female connector for 20 pines AWG |
1 x | Male connector for 10 pines AWG |
1 x | Cabling for Fox MDM1 wings |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
2 x | Female connector for 12 pines AWG |
1 x | JETImodel Addcap 1640 |
1 x | SPS 70V 140/280 A |
1 x | SBEC 40 |
1 x | Switc electronic 30 Amp |
|
18,675.36EUR |