1 x | DPSI OCP Overload protection |
1 x | Angle measurer |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Field folding model stand |
1 x | Propeller balancer |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | Surface Indicator Gauge Small |
2 x | Balsa panel 1.0x100x1000 mm |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Allen wheel collar M4x4 |
2 x | BALSA trip 2.0x2.0x1000 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Allen wheel collar M3x3 |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Allen wheel collar M3x5 |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
3 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Clip fixing for wing (2 pcs) |
2 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | Balsa panel 4.0x100x1000 mm |
2 x | 80 mm rods set for direction control |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | 250 mm / 16 mm Airbrakes |
3 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | BALSA trip 3.0x5.0x1000 mm |
2 x | Canopy Latch |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
3 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | 140 mm rods set for direction control |
3 x | 100 mm rods set for direction control |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
3 x | Allen wheel collar M4x6 |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
3 x | 45 mm rods + T patellas set for direction control |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Cable tie mounts 4.3 (4 uds) |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Balsa panel 1.5x100x1000 mm |
2 x | Balsa panel 2.5x100x1000 mm |
1 x | Miniature brass strap hinge, 1 m |
1 x | 25 mm reinforced hinge |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Conector JR Servo male (50 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Angled clevis with threaded rod M3 |
1 x | M3 black washers (4 pcs) |
1 x | Nitroverdu 500 ml |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
2 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Field folding model stand SebArt |
1 x | Oils Pumps Empty (1 liter) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Steering arm 16 mm Ø 3 mm |
3 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Cockpit plastic closing |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Ball Link Plier |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Z Bender - S Type Tool |
2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Flap hinge (6 pcs) |
1 x | Bungee HLG Premium |
1 x | Extension for SensorSwitch 30cm |
1 x | PowerBox iGyro SRS + GPS Modul |
1 x | 2 piece mounting frame |
1 x | PowerBox Competition SR2 |
1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
1 x | BlueCom™ Adapter (iOS) |
1 x | PowerBox Battery 4000 |
1 x | PowerBox MERCURY SR2 |
1 x | PowerBox iGyro 1e |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Servo DITEX TD2612S |
2 x | Wire easy tensioner (silver) |
1 x | Cable coupler M2 (10 uds) |
1 x | Pulley brass 14/2 (2 pcs) |
2 x | Threaded coupler M2 (10 pcs) |
2 x | Pulley brass 8/2 (2 pcs) |
2 x | wire tensioner (red) |
1 x | Cable coupler M3 (10 uds) |
2 x | wire tensioner (blue) |
3 x | wire tensioner (black) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Servo DITEX EL0510M |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Crimping tool |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | DJI Mavic Air Fly More Combo |
2 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Cockpit aluminium closing |
1 x | 45 mm rods set for direction control |
2 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
2 x | 200 mm extensión servo HITEC/JR |
2 x | 1/6 Pilot "Garry" |
2 x | |
1 x | Snap for floding prop for 2 mm axi |
1 x | Lead with adhesive (2 pcs) |
2 x | 1/6 Pilot "Tony" |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | 1/6 Pilot "John" |
2 x | "Taxi Tank" Fuel Tank |
3 x | Blind nut M3 (4 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
2 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Cyano INSTA - CURE™ (12g) |
1 x | |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Split M1,2x10 (10 pcs) |
2 x | 41x5,5 mm wires output (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Caps multicolor Switch JETI |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Small kwik link (10 pcs) |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Sealing Iron Profi LCD |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Tip wing protector 30x10 (2 pcs) |
1 x | 55% silver electrodes (2 pcs) |
1 x | Dean-T Plug Mold |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Rubber Insert soft, 1 Pcs. |
1 x | Handle for PERMAGRIT lime |
1 x | Long pinned hinge (12 uds) |
2 x | 1/6 Pilot "Buddy" |
2 x | 280 cc gasoline fuel tank complet |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Wire easy tensioner (red) |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Round Rod 1.0x3.5 cm |
1 x | White large kwik link (10 pcs) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Dremel PERMAGRIT thin lime |
1 x | Sealing Iron Sleeve STD |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Steel brush wheel with 2.35mm |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | 100g Flux Paste for Silver Solder |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Sandpaper file 13 mm |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Heli digital angle measurer |
1 x | Tool for entel |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
1 x | Heli blades angle measurer |
1 x | Roller cutter 28 mm |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Dremel 3000 130W |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Pistola termica MH 550 micro |
1 x | Mold plugs XT-90 |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | MPX 8 pins plug mold |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Mold plugs XT-30 |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Tube bender |
1 x | Mini-handed clamp |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | AC-10 pre-rotacion with motor |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | 10 mm gas motor standoff |
1 x | 25 mm carbon servo arm |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | 1/10 Pilot "Jack" |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | 1000 cc gasoline fuel tank complet |
1 x | 110x55 mm SLH KOVO wheel |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 1/4 Pilot "Heidi" |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Aluminium servo arm (2 uds) |
1 x | Angle support XT60 conector |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | 1/4 Pilot "Mike" |
1 x | 800TVL CMOS camera for FPV |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | 90 mm CFK long Spinner fixed by a central screw |
1 x | 1/12 Pilot "Tom" |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | 18m Fitting barb |
1 x | 1/12 Pilot "Langley" |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | 20 mm carbon horn |
1 x | 1/7 Pilot "Japanese" |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
1 x | 22m Fitting barb |
1 x | Aero shocks |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | 82 mm aluminium spinner. |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | 89 mm aluminium spinner. |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | 20x200 mm battery rings |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
|
8,288.16EUR |