3 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Cable grommet 9.5 mm (4 uds) |
2 x | 140 mm rods + T patellas set for direction control |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
5 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | 100 mm rods set for direction control |
2 x | 140 mm rods set for direction control |
2 x | Allen wheel collar M4x6 |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Canopy Latch |
4 x | 250 mm / 16 mm Airbrakes |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Allen wheel collar M3x3 |
2 x | Cable grommet Ø 5 mm (4 uds) |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
3 x | Clip fixing for wing (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Clip mini fixing for wing (2 pcs) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Xplorer3 anemometro |
1 x | Xplorer1 anemometro |
1 x | Xplorer4 anemometro |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | Cross Connector 4.0 mm x 1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
2 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
3 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Round Rod 2,5x1000 mm |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
2 x | 100 mm rods + T patellas set for direction control |
2 x | Wheel collar 4 mm Ø (4 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
3 x | 45 mm rods + T patellas set for direction control |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
3 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Cockpit metalic closing |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Soporte grifo FESTO (2 pcs) |
3 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
3 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Support FUEL DOT V3 |
2 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Cockpit aluminium closing 4.7g |
1 x | Support Flush MPX Conector (6 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | Cockpit aluminium closing |
2 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Chopped glass fibre strands 3 mm |
2 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Styrene plate 320x120x1.0 mm |
1 x | 8 mm Adapter for AXI53xx |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Allen wheel collar M4x4 |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Castrol Oil TTS 1l |
1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Smoke Oil Blue 5 l |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod M3 |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | 80 mm rods set for direction control |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Lead with adhesive (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
2 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Pushrod octagone 3/2 |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | One touch canopy lock |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Snap long M2 (10 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Snap for floding prop for 2 mm axi |
1 x | Silicone red 1,5 qmm wire ( 25 m) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | 5 line servos wire black (1 m) |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | RANGER Jet Red/White 1.854mm combo |
1 x | Boomerang SPRINT V2 Red/White/Blue |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Silicone black 1,5 qmm wire ( 25 m) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Motor OS 3805-1200 electric |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Propeller RF CFK 14.5x14 |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | AXI Cooler 41xx |
1 x | XPower XC3522/5 LS |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Propeller CFK 23x12 |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Propeller CFK 12.75x13 |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon 1 pair |
1 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 18x17 |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Propeller CFK 16x16 Slim |
1 x | 76 mm light wheels (2 pcs) |
1 x | Propeller CFK 11x8 |
1 x | Propeller CFK 14x7 |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | Propeller RF CFK 13x6.5 |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Hitec 46 mm servo arm with ball link |
1 x | FOAM - CURE™ (24g) |
1 x | ExtraCA Top |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | 45 mm rods set for direction control |
2 x | Triple rod con. 3mm Pushrod (2 pcs) |
2 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Cylinder for ZG20 |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | Catalyst INSTA - SET™ (235g) |
2 x | Control for forward wheel (MINI) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | 90 mm rods + T patellas set for direction control |
2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Vertical mounting servo holder |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Futaba 52 mm servo arm |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Hitec 38 mm servo arm |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Extender tip (6 pcs) |
1 x | Debonder UN - CURE™ (30g) |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | Thread locker IC-Loc™ red "high" 10 ml |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Cyano INSTA - CURE™ (12g) |
2 x | Cockpit latch closing I=10 mm |
1 x | Window mounting channel 5m |
1 x | Split pin 1x8 mm (10 uds) |
3 x | Wing bolts M6 Steel screw Blue (2 pcs) |
2 x | Split M1,2x10 (10 pcs) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Snap short M2 (10 uds) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Pick up DA50/100/150 |
|
12,801.67EUR |