1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Buy Perforated film 100 cm / 20 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
2 x | Buy Perforated film 145 cm / 50 m |
1 x | Small aluminium horn gold (2pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
3 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Jeti Black cap |
1 x | Threaded coupler M2 (10 uds) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Ball link Aluminio M3 (2 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Horn with ball 55x40 |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 6/35 with M3 Bearing |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Cable control set |
1 x | Couple M4 for wire (10 pcs) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Cable with accesories |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Horn with ball 40x30 |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | 20 mm carbon horn |
1 x | Cap Hispano Aviación |
1 x | Softshell Hispano Aviación |
2 x | Vest clothes Hispano Aviación |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
2 x | Head runner |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
2 x | Blade holder center |
2 x | Battery plate |
1 x | Black large kwik link (10 pcs) |
2 x | Head core |
2 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Rotor Mast |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
2 x | Head lower part |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | CA Glue fast 20g |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Release wax 250ml |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | CC 01 |
1 x | CC 02 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Adapter lead MPX/XT60 |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Adapter lead MPX/EC3 |
1 x | CC 03 |
1 x | BEC 3A FOXY |
1 x | Battery charging cable XT60 |
2 x | Connector Sub-D 2+5 Female |
1 x | Extension MPX-MPX 20 cm |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Connector Sub-D 2+5 Male |
1 x | Starter EM Gear Power 80 |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Oracover GREY Seafire Sea 2m |
2 x | LA500 housing-upper cyclic |
3 x | Bearing 3x6x2,5 |
2 x | LA500 Autogyro |
2 x | LA500 cyclic central part |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | BULLIT Wing 1095 mm |
2 x | Motor rotor LA-500 |
2 x | Ring support P-20 OPUS V-Jet 60mm |
3 x | 50N turbine start protection tube |
2 x | OPUS-V / Jet-CC-BF |
1 x | BULLIT Wing 840 mm |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | 27x10 prop Super Silence |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
2 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
1 x | Interruptor RX/Batterie |
1 x | TrainerCord (master-learner) |
1 x | 30 cm BEC cable (female) |
2 x | LA500 rotor head shaft |
1 x | Short Switch On/Off micro |
1 x | Bearing housing |
2 x | LA500 pre-rotation gear |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | Screws flush mount M2 |
2 x | Blade holder upper |
2 x | LA500 pilot-seat set |
2 x | Baering 3x8x4 |
2 x | LA500 ciclic lever |
2 x | Cierva C30 spanish decoration Stickers |
1 x | Motor wall |
1 x | Screw M3x16 |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Mould Resin P 10 kg |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | PSC 6 |
1 x | 3 LiPo XH>EH adapter |
1 x | MAX BEC |
1 x | PSC 5 |
1 x | SPARK Switch 5.9v |
1 x | MPX-Dean "T" Adapter |
1 x | SPS 70V 100/200 A |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Battery bed V2_M (black) |
1 x | Battery bed V2_S (black) |
1 x | PowerPack 2.5X2 PRO |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | LiPo Storage Box Type "BIG" |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
2 x | LA500 rotor head core |
1 x | Nut M2 |
1 x | Baal link 4/14/4 (5 pcs) |
2 x | LA500 Blades |
2 x | Head lower part New |
1 x | Screws M1,6x6 Allen |
2 x | LA500 front gear holder |
1 x | Balls 4 mm |
1 x | Head core bushing |
1 x | Tail support (2 pcs) |
1 x | Cierva C30 Elevator |
1 x | Nut M2 securing |
1 x | Cierva C30 simulated motor |
1 x | LA500 housing-lower cyclic |
1 x | Complet landing gear |
1 x | Head upper part |
1 x | Head spacer |
1 x | Rudder |
1 x | LA500 freewheel bearing |
1 x | Piñon motor rotor LA-500 |
1 x | Autogyro Cierva C30 Spain |
1 x | Servo Fork |
1 x | Blades 330mm |
1 x | Servo HITEC HS-125 MG |
1 x | Silencer for ZG22, ZG23, ZG231SLH, G2D96-D |
1 x | Gates hinge |
1 x | Radial mount for electric 2.5-5.6 |
1 x | 18m Fitting barb |
1 x | Filler Gauges |
1 x | Compact on-board starting system (9724) |
1 x | Extension for SensorSwitch 30cm |
1 x | Extension for SensorSwitch 60cm |
1 x | Servo HITEC D950 TW |
1 x | Reed valves with doubler, set for DA 85/100/120 |
2 x | Spring clamp for tube Ø50 mm |
1 x | Spring Clip 25 mm teflon tube |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Recess mount-rem. glow plug set |
1 x | Double side nipple |
1 x | Compact on-board starting system (9525) |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | Giant Scale Muffler D.A. 70 |
1 x | PowerBox PIONEER incl. microSwitch |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HITEC D954 TW |
1 x | Servo HITEC D131 MW nano |
1 x | Gear set HITEC HS-55 |
1 x | Gear set HITEC HS-65 HB |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Spark plug capZG 20/ZG 26EI with HT lead |
1 x | Screw for mounting plate of DA100/120 |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Saito FG-36 motor support |
1 x | Stainless Steel Muffler D.A. 35-70 |
1 x | Stainless Steel Bend D 25x0,5mm |
1 x | Prop hub screw DA85/100/120 & VM170/200/210 |
1 x | Silencer kit ZG 45/62 |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Stainless Steel Bend D 12x0,4mm |
1 x | Stainless Steel Bend D 28x0,6mm |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Stainless Steel Bend D 20x0,6mm |
1 x | Stainless Steel Muffler D.A. 50/100/120 |
1 x | Stainless Steel Bend D 22x0,5mm |
1 x | Reed valve for DA-60/70 |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Motor MVVS 2.0/1120 |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | Axi for MVVS 3.5 Sport |
1 x | Electromotor starter EME 35cc |
1 x | GLOW 9C + accesories |
1 x | Distanzstück motor OS 120 AX |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | Electron 22 mm Fitting barb |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | EME 55 cc carburetor WALBRO |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | O-ring Saito FG-73 5cyl |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | Tacometer mini ignition RCEXL |
1 x | Ball Bearings for motor A60-V2 |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | Propadapter for motor A60-V2 |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Air Trap Mounting - 175ml |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | Propeller diller for DLE170 |
1 x | Reed valve for DA 50-R |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | 700 ml complete glow fuel tank |
1 x | Aluminium ignition bad (red) |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Compact on-board starting system (9715) |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | GPS Expander Module |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Y Cable |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | Extension for LC-Display 50cm |
1 x | PowerBox DigiSwitch V2 MPX/JR |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | PowerBox Battery 4000 |
1 x | PowerBox 12 |
1 x | PowerBox iGyro SRS |
1 x | PowerBox MAG Sensor |
1 x | PowerBox Evo |
1 x | MicroMatch PowerBox |
1 x | PowerBox DigiSwitch V2 JR/JR |
1 x | PowerBox MicroSwitch |
|
20,124.82EUR |