1 x | Towing hook |
1 x | Towing hook <3m |
1 x | Tow hook for tug |
1 x | Towing hook |
2 x | Adjustable launching hook |
2 x | 5 LiPo XH>EH adapter |
3 x | Cabel charger transmitter GRAUPNER |
1 x | Circlick securite |
1 x | 4 LiPo XH>EH adapter |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | Adapter lead MPX/EC3 |
1 x | CC 05 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | CC 03 |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | CC 02 |
3 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | JETImodel SINGLE BEC |
3 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 2 LiPo XH>EH adapter |
3 x | 30 cm BEC cable (male) |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20x200 mm battery rings |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Marker ties (20 pcs) |
2 x | Tape GFK 25 mm |
2 x | Cinta Goldfix 1m |
1 x | |
1 x | SE Ring 350 mm (2 pcs) |
2 x | Spikes Band (5 m) |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | SE Ring 400 mm (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 200 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Hot Glue Stick RED |
1 x | Xplorer2 anemometro |
1 x | Motor DLE 200cc Std |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | RH long aluminium horn (2pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Propeller balancer |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Fixed launching hook |
1 x | 2,3 mm Prop Adapter M5 |
1 x | 5 mm Prop Adapter M6 |
1 x | Ancla 16 mm (2 pcs) |
1 x | Ancla 35 x 22 mm (2 pcs) |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Joint for loading boom 2 pairs, 10 x 5 mm |
1 x | Stick coupler Ms 15 mm |
1 x | La Capitania di Venetia accesories |
1 x | DIVA cabin cruiser |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Motor ACTRO 35-4-790 |
2 x | BEC 3A FOXY |
2 x | APM2.6 Power module with 5.3V DC BEC |
2 x | Chopped glass fibre strands 0.2 mm |
2 x | Extension 6 lipos XH > EH |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | SBEC Jeti |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Extension 5 lipos JST - JST/C |
3 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Multi-adapter balancer JST - TP |
2 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
3 x | Male Prolonger TP 4/5S |
1 x | Extension 5 lipos JST/C - JST |
2 x | MPS Gas-Cap-Powerswitch |
1 x | TrainerCord (master-learner) |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Electronic switch JETI SP06 Opto |
1 x | Extension 2/3 lipos JST/C |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Chopped glass fibre strands 3 mm |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
2 x | PSC 5 |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
2 x | Magnetic Interruptor MULTIPLEX |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Optical RPM Sensor |
1 x | Air pressure gauge |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Quick hose connector 3-3 mm |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Servo HITEC HS-125 MG |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | XH LiPo extension lead |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | 460 mm EPP Floats |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Aero shocks |
1 x | Nylon threaded block M5 (2 uds) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Trailing leg 131 mm |
2 x | Mudguard wheels 112/127 mm |
1 x | Frontal support Speed 600 |
1 x | Frontal support Speed 400/480 |
2 x | Motor holder AXI |
2 x | Frontal support Speed 280 |
2 x | Cooler motor type 300 |
2 x | Size "L" motor holder for class 600 |
1 x | Ferrita 27x14x7 mm |
4 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
2 x | Size "M" motor holder for class 400 |
3 x | A60 Motor Mount Alu complete set |
2 x | Ø 38 mm fiberglass motor-holder for electric motors |
2 x | Size "M" motor holder for class 400 |
1 x | Indoor motor holder |
2 x | Motor holder for AC 28/7 |
1 x | Motor mount for 1 m models |
3 x | Prop Saver for AXI 22xx/xx |
2 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
3 x | A50 Motor Mount Alu complete set |
1 x | |
2 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Cooler motor type 150 |
2 x | Universal Prop Saver |
2 x | Bearings for motor HACKER C50 |
2 x | Size "M" motor holder for class 600 |
1 x | Central support Speed 600 |
2 x | Central support Speed 280 |
3 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
3 x | Motor holder AXI |
2 x | Cooler motor type 400 |
2 x | Motor mount M |
2 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | AXI Cooler 41xx |
1 x | Electric coversion set |
3 x | 8 mm Adapter for AXI53xx |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
2 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
2 x | Motor Mount for Multiplex FunJet |
2 x | Receiver bed (Blue) |
2 x | Cooler motor type 280 |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | ULTIMATUM 2.0 m red/black |
1 x | 3 mm Long Prop Adapter M5 |
1 x | USB interface ALTIS |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | SPS 70V 100/200 A |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Railing 5x100 mm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Bandera Frankr 4x6 |
1 x | Mounting base Ms 8 mm |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Anchor of tow Met. 60 mm |
1 x | Railing L250 mm (10 pcs) |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Ancla 40 x 24 mm (2 pcs) |
1 x | 75 mm |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Anchor 80 mm (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | UBEC 6A KAVAN |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | USB HLS prog. interface |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Adapter 3,2 mm M6 |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Switc electronic 30 Amp |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | SPARK Switch 12v |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Glass fabric 25 g (2 m²) |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Interruptor RX/Batterie |
1 x | MZ-18, 9 Channel HoTT |
1 x | Propeller POWER-PROP 13x9 |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Carbon plate 700x550x0.5 mm |
2 x | ABS 500 x 400 x 1 mm (white) |
1 x | PT 22x10 EL Propeller |
1 x | Long Switch On/Off micro |
1 x | Interruptor SPS 70v 60/120A |
1 x | DPSI magnetic switch actuator (housing) |
1 x | KIRA 400-39 5,2:1 |
1 x | DPSI RV Mini 6 Magic |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Propeller MEJLIK 20x13 N-3 Blades |
1 x | Adapter 3,0 mm M8 |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | ALPHA 1000mm BL ARTR |
1 x | Chopped glass fibre strands 3 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | CA Glue (medium) 20g |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Release wax 250ml |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Propeller POWER-PROP 11x8 |
1 x | Decorative caps, multicoloured |
1 x | Propeller POWER-PROP 14x8 |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Selfstart electronic switch |
1 x | Blade holder metal LAMA |
1 x | KIRA 600-17 |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Adapter SPEED 480 |
1 x | KIRA 480-34 5,2:1 |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Motor OS 3820-1200 electric |
1 x | KIRA 600-30 6,7:1 |
1 x | Piston ring for DA-150 |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Mounting base Ms 12 mm |
1 x | EME 55 cc carburetor WALBRO |
1 x | Variable Flow Smoke Pump System |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Magnetic Connect locking system |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Retract undercarriage |
1 x | Propeller MEJLIK 22x10 |
1 x | Propeller MEJLIK 18x8 CFK |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Propeller MEJLIK 29x10S |
1 x | Propeller MEJLIK 26x12 N-3 Blades |
1 x | Receptor FUTABA R7003SB FASST |
2 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
2 x | Wingstabi 9 DR M-Link Receiver |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | TopFuel LiPo 20C-ECO-X 5800mAh 4S |
1 x | KIRA 480-26 5,2:1 |
1 x | LiPo TopFuel Power-X 4000 mAh 2s 35C MTAG |
1 x | Propeller Pleg CAM Carbon 12x11 |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Propeller Pleg CAM Carbon 16x10 |
1 x | Propeller Pleg CAM Carbon 14x8 |
2 x | AXI Cooler 22xx |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Servo HITEC HS-45 HB |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | LiPo KAVAN 3700 mAh 14.8v 40/80C |
1 x | LiPo TopFuel ECO-X 2000mAh 2s RX |
1 x | Propeller Pleg CAM Carbon 10x7 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Fiberglass motor-holder for electric motors |
1 x | Motor mount for 1200 mm models |
1 x | Hacker A30-S Radial Set |
2 x | Fiberglass motor-holder for electric motors |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | LiPo KAVAN 3700 mAh 11.1v 40/80C |
1 x | Lipo KAVAN 2200 mAh 11.1v 30/60C |
1 x | Lipo KAVAN 2200 mAh 11.1v 40/80C |
1 x | Lipo KAVAN 3300 mAh 7.4v 40/80C |
1 x | LiPo TopFuel ECO-X 2400mAh 4s 35C MTAG |
1 x | TopFuel LiPo 20C-ECO-X 4500mAh 6S MTAG |
1 x | TopFuel LiPo 20C-ECO-X 2400mAh 2S MTAG |
1 x | 5 mm Prop Adapter M6 |
1 x | LiPo TopFuel ECO-X 5000 mAh 4s 35C MTAG |
1 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
1 x | TopFuel LiPo RX 25C-ECO-X 800mAh 2S |
1 x | LiPo TopFuel ECO-X 3800mAh 4s 35C MTAG |
1 x | Parachute XTRALITE S |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
1 x | Propeller Pleg CAM Carbon 10.5x6 |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Propeller Pleg CAM Carbon 14x10 |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Propeller Pleg CAM Carbon 17x9 |
1 x | Propeller Pleg CAM Carbon 12x10 |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
2 x | Metalic motor holder for class 550-600 |
1 x | Propeller CFK 16x16 Slim |
1 x | Propeller CFK 14x6.5 |
1 x | Propeller CFK 16x13 |
1 x | Prop Holder AXI 41xx V2 |
1 x | Frontal Adapter for AXI53xx |
1 x | Propeller RF CFK 13x7 |
1 x | Propeller CFK 18x17 |
1 x | Propeller CFK 17x18 |
1 x | |
1 x | Propeller CFK 13x7.5 |
1 x | Propeller RF CFK 14.5x14 |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Gear set HITEC HS-81 |
1 x | Gear set HITEC HS-7950TH |
1 x | Servo HITEC D145 SW |
|
22,229.65EUR |