1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | U Profile ABS 5,0x10,0x1000 mm |
3 x | L-Connector 1.0 mm x 1000 mm |
2 x | Profile ABS half cane 2.5x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Profile ABS Square 3 x 1000 mm |
3 x | Profile ABS Square 1 x 1000 mm |
3 x | L-Connector 1.5 mm x 1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
3 x | Release wax 250ml |
2 x | Nitroverdu 500 ml |
2 x | Universal Colour Paste deep black 50 g |
2 x | Spray adhesive AEROFIX 2 |
1 x | Servo NARO Max Std |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Universal Colour Paste white 50 g |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Spannlack 1000 ml |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Spray Graphit 33 |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
2 x | Partall paste 650 g |
1 x | |
2 x | Spray YELLOW Inca Lexan 150ml |
2 x | 1000 ml sealer (DOPE) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Hot Glue Stick BLACK |
1 x | Socket head ball link M3 (2 uds) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Fuel Fittings-Red |
2 x | Deposito combustible tipo "turbina" 330 ml |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | Universal Colour Paste deep black 250 g |
1 x | 500 ml sealer (DOPE) |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | |
2 x | Angle support XT60 conector |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS angle 10,0x10,0x1000 mm |
2 x | Flat Connector 4.0 mm x 1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Professional Servo tester |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | entral piece 3Bl 42 mm 0º |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Servo Tester |
1 x | Central piece 42 mm 0º [12 mm] |
1 x | Central piece 47 mm - 2,5º |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
3 x | Hobbylite Filler, Balsa colour |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Central piece 42 mm 0º |
1 x | |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Central piece 42 mm 0º [6 mm] |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Wing OXY 5,0 m2 |
1 x | Servo inverter |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Z-shaped servo mount |
1 x | Central piece 47 mm + 5º |
1 x | Red spinner 45 mm |
1 x | Central piece 47 mm 0º |
1 x | Central piece 42 mm + 5º |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner 3BL propeller pleg. 36 mm / 4,0 mm |
1 x | Spinner 3BL propeller pleg. 36 mm / 5,0 mm |
1 x | GPS Logger Dymond |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Central piece 52 mm + 5º |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Futaba 17 mm servo arm with ball link HITEC |
2 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Hitec 38 mm servo arm |
1 x | Ball Bearings for motor A60-V2 |
2 x | Propeller diller for DLE170 |
2 x | Propadapter for motor A60-V2 |
3 x | 3,2 mm Prop Adapter M8 |
2 x | 15x7 tree blades propeller |
2 x | 29,0 mm propeller (rigth propeller) |
2 x | 12 mm portholes (10 pcs) |
2 x | Bidule 111 3000 mm Canopy |
1 x | STD excentric gearbox for 2,0mm axis (3,75:1) |
1 x | Planetary gearbox(3,8:1) |
1 x | 12x6 tree blades propeller |
2 x | 10 mm portholes (10 pcs) |
3 x | 3.2 mm Prop Adapter M8 |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Propeller diller for DA50, DLE55 red |
1 x | 12x8 tree blades propeller |
3 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
2 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
3 x | 15x7 tree blades propeller LEFT |
1 x | FUELING VALVE GASOLINE LARGE (1PC) |
4 x | 2,3 mm Prop Adapter M6 |
2 x | 31,0 mm propeller (rigth propeller) |
2 x | SKY MASTER 3.000 mm ARF |
2 x | 11x7 tree blades propeller |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
2 x | 3 mm Leader (L 100 mm) |
3 x | 16x10 tree blades propeller Master Airscrew |
2 x | Bidule 55 2460 mm Cabina |
2 x | 28 mm turnbuckle |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
3 x | 10 mm Prop Adapter M12 |
2 x | 3.2 mm Prop Adapter M6 |
2 x | 300x4 mm M4 shaft ship |
1 x | Blocking screws M6 gas engine |
2 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
2 x | 29,0 mm propeller (left propeller) |
2 x | Bidule 111 3000 mm |
1 x | Propadapter for motor A50 |
3 x | 3.17 mm Prop Adapter CN-Spinner |
2 x | 14 mm portholes (10 pcs) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | PILATUS PC-6 Turbo Porter 33% 5.290 mm |
3 x | 3 mm Prop Adapter M6 |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Excentric gearbox for 2,3mm axis (4,1:1) |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,8:1) |
1 x | STD excentric gearbox for 2,0mm axis (5,0:1) |
1 x | Planetary gearbox(3,8:1) |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
1 x | STD excentric gearbox for 3,2mm axis (3,0:1) |
1 x | Planetary gearbox(3,8:1) |
1 x | Planetary gearbox(3,33:1) |
1 x | STD excentric gearbox for 2,3mm axis (3,0:1) |
1 x | Excentric gearbox for 2,3mm axis (3,0:1) |
1 x | Excentric gearbox for 2,0mm axis (3,5:1) |
1 x | STD excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Excentric gearbox for 2,0mm axis (3,75:1) |
2 x | Gearbox for VM motors (2,5:1) |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Motor A50-16 S V4 |
1 x | AXI 2217/16 V2 Long |
1 x | AXI 2826/10 V2 Long |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | Paramotor BackPack XXS 2 |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Servo mounting frame SV-1260MG |
1 x | AXI 2814/12 V2 |
1 x | Axle for motor A30-XL V2 |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Motor A40-10S V4 14-Pole |
1 x | 58 mm micro servo cover |
1 x | AXI 2217/12 V2 |
1 x | Motor A200-6 |
1 x | AXI 2820/8 V2 |
1 x | 90x60 mm standart servo cover |
1 x | AXI 2217/16 V2 |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | 18 mm wing servo holder |
1 x | Servo TOPMODEL S7520 MG |
1 x | Servo SAVOX SV-1273 TG |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Motor A30-14 L V4 |
1 x | 90x75 mm standart servo cover |
1 x | AXI 2814/16 V2 |
1 x | Piñones SAVOX SH-0350 |
1 x | AXI 2820/12 V2 |
1 x | AXI 2814/20 V2 |
1 x | AXI 2826/6 V2 Long |
1 x | AXI 2826/12 V2 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | 20 g tin paste |
1 x | NF-3X-80 liner Kit |
1 x | NF-3XL set |
1 x | Autogyro Cierva C30 Spain |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Futaba 38 mm servo arm with ball link |
1 x | A60-6XS V4 28-Pole |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Car Charger DC/DS-16 |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DC24 II Transmitter case insert |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Secraft Fuel system v2, red color |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Z Spinner (CN) 32mm |
1 x | Head runner |
1 x | Blade holder center GFK 0,5 mm |
1 x | Blade holder lower |
1 x | Bearing 3x6x2,5 |
1 x | AXI 2826/6 V2 |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | NF-3X-350 set |
1 x | NF-2 RC set |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | AC-10 pre-rotacion with motor |
1 x | Screws flush mount M2 |
1 x | Nut M2 |
1 x | Blade holder upper |
1 x | Raer wall |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | 30x14 prop Super Silence |
1 x | Hitec 30 mm servo rounded arm |
1 x | Futaba 46 mm servo arm with ball link |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | Spinner propeller pleg. 42 mm / 4,0 mm |
1 x | Propadapter for motor A50-V3 |
1 x | 10x7 tree blades propeller |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
1 x | Actrocon 30A ESC |
1 x | Antiaircraft gun 3.7 cm (5 pcs) |
1 x | Fuel dot V3 (Silver) |
1 x | Antenna 50 mm (2 uds) |
1 x | Anchor 50 mm (2 uds) |
1 x | Fuel line plugs (Silver) |
1 x | La Capitania di Venetia accesories |
1 x | 14 mm Portholes for screws (10 pcs) |
3 x | 2,3 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
2 x | Aero-Master (Aero-naut) |
1 x | CAM-Carbon Light Prop 14x6" (Prop right) |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Lead with adhesive (2 pcs) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | 2 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | 5 mm Prop Adapter M6 |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | Axle for AXI 4130 V2 motors |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | |
1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | Air Trap Mounting - 175ml |
1 x | Axle for AXI 5325/xx motors |
1 x | 25 mm fenders (10 pcs) |
1 x | Gearbox for VM motors (3:1) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Refueling Cap V3 Red |
1 x | BOX-Setup Actro-marine |
1 x | ALU servo arm 3 mm shaft |
2 x | Refueling Cap V3 Black |
1 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | 3 mm Prop Adapter M6 |
2 x | 2.3 mm Adapter for 30 mm spinners |
2 x | Aero-Master Cabine (Aero-naut) |
1 x | CAM-Carbon Light Prop 13x5" Q500 |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | 45 mm black plastic spinner for fixed propeller |
2 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Deposito DUBRO 360 ml - 12 oz |
1 x | Electronic double valve landing gear |
1 x | 500 ccm complete gasoline fuel tank |
1 x | 1000 ccm gasoline fuel tank |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | 18m Fitting barb |
1 x | Axle for AXI 2820/xx motors |
1 x | Axle for AXI 4120/xx motors |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | 280 cc gasoline fuel tank complet |
1 x | Axle for AXI 2808/xx motors |
1 x | Check valve quick hose connector 4-4 mm |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Quick hose connector 3-3 mm |
1 x | BABY glider (Aero-naut) |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Quick hose connector 6-4 mm |
2 x | Bidule 55 V3 2460 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Actrocon 60A ESC |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Anchor 25 mm (2 uds) |
1 x | Block 1Rolle 5x7x3 mm (5 pcs) |
1 x | Refueling kit for Cap "Red" |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Ancla 16 mm (2 pcs) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Brass wire 0.30 mm (25 m) |
1 x | CAM-Carbon Light Prop 11x5" (Prop right) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | CAM-Carbon Light Prop 10x7" |
1 x | Valvula One way |
1 x | Simple take for fuel tank |
1 x | Refueling Cup V2 Red |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | Fuel dot V3 (Red) |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
1 x | Tygon tube 4.8 x 3.2 mm 15 m |
1 x | Fuel station 10L incl. pump electric |
1 x | Ancla 40 x 24 mm (2 pcs) |
1 x | BLOCK m.Ose Ms vern 12 |
1 x | Cabestrante plastico 5x6 mm (10 pcs) |
1 x | Block 21x19 mm (5 pcs) |
1 x | Tubo silicona transparente 7 x 3 mm (1m) |
1 x | Fuel Dot (Black) |
1 x | 75 mm |
1 x | Axial ball bearing Ø 5 mm |
1 x | Ancla metal 40 mm (2 uds) |
1 x | CARBON CUB 15cc ARF 2280 mm |
1 x | Tubo espiral FESTO 6x1 Black |
1 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
1 x | 6 mm Prop Adapter M8 |
1 x | 6 mm Prop Adapter M8 |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Capstan of plastic 88x30x36 mm |
1 x | CAM-Carbon Light Prop 12x6" |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | CAM-Carbon Light Prop 13x6" (Prop left) |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop left) |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Cancamo Ms 7 mm (50 pcs) |
1 x | Dumper propeller 6/8 mm |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | Aero-Master Wings (Aero-naut) |
2 x | 3,2 mm Prop Adapter M6 |
1 x | CAM-Carbon Light Prop 12x5" (Prop right) |
1 x | CAM-Carbon Light Prop 12x7" |
1 x | Stick coupler Ms 15 mm |
1 x | CAM-Carbon Light Prop 14x6" (Prop left) |
1 x | CAM-Carbon Light Prop 13x6" (Prop right) |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | 5 mm Prop Adapter M8 |
1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Canadair CL-415 (aero-naut) |
1 x | Central piece 38 mm 0º |
1 x | CAM-Carbon Light Prop 9x5" (Prop right) |
1 x | Capstan of plastic 125x72x45 mm |
1 x | CAM-Carbon Light Prop 13x5" Q500 (Prop left) |
1 x | Capstan of plastic 91x44x45 mm |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | Cannon 53/6 mm |
1 x | Catalog AERO-NAUT 2016 |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | 12 mm mast holder |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop right) |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | CAM-Carbon Light Prop 9x6" |
1 x | 4 mm Prop Adapter M8 |
1 x | 3,2 mm Prop Adapter M6 |
|
34,289.60EUR |