5 x | Round Rod 5,0x1000 mm |
4 x | Strip ABS 2.0x8.0x1000 mm |
4 x | Strip ABS 2.0x5.0x1000 mm |
4 x | ABS I Strip 20x10x1000 mm |
4 x | Round Rod 2,5x1000 mm |
4 x | ABS Strip 1.5x8.0x1000 mm |
2 x | Round Rod 1,5x1000 mm |
4 x | Round Rod 1,25x1000 mm |
5 x | ABS Strip 1.0x2.0x1000 mm |
4 x | ABS Strip 1.0x3.0x1000 mm |
5 x | ABS Strip 1.5x6.0x1000 mm |
5 x | ABS Strip 1.5x4.0x1000 mm |
4 x | Motor DLE 430 cc - Paramotors |
10 x | Small Crow DLE-170M |
2 x | Universal batery Tester |
3 x | Kwik link with arm M5xM2,5xL30 |
3 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
3 x | Black large kwik link (10 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
4 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
2 x | Oracover Azul 2 m |
2 x | Connectors banna oro 8,0 mm (M/F) |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
4 x | Conector JR Servo male (10 pcs) |
5 x | Fully Threaded Steel Rod M2,5 (2 uds) |
3 x | ABS tube 3.0x2.0x330 mm |
2 x | Ferrita 17x10x6.5 mm |
2 x | Pilot "Duke" Legends Series (Slimline) |
3 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
2 x | 12.7 mm 2:1 black termoretract tube |
3 x | Horn 5/10 with M2 Bearing |
2 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | Gold antispark 5,5 mm plug |
3 x | 1000 ml sealer (DOPE) |
4 x | ABS tube 5.0x4.0x156 mm |
2 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
3 x | ABS tube 3.0x2.0x1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | Set clevis for pull-pull (TY13233 & TY13234) |
3 x | Jeti Black cap |
5 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | 1/7 Pilot "Japanese" |
3 x | ABS tube 6.0x4.0x1000 mm |
4 x | ABS tube 14.0x10.0x1000 mm |
1 x | Pilot "Ice Man" (Slimline) |
2 x | ABS tube 8.0x7.0x1000 mm |
4 x | Carbon fiber rod 5.0 mmx1000 mm |
3 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
3 x | ABS tube 9.0x8.0x1000 mm |
3 x | Cable control set |
4 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | ABS tube 4.0x3.0x1000 mm |
2 x | ABS tube 5.0x4.0x1000 mm |
3 x | Brass control horn M2 short for wire (2 pcs) |
4 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | Protective Cover for wires Ø 15 mm 1000 mm |
2 x | CC 05 |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
4 x | ABS tube 12.0x10.0x1000 mm |
2 x | 6,4x1000 mm 2:1 green termoretract tube |
3 x | Connector Sub-D 2+5 Female |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | PPM Encoder Module |
6 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
3 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | 2 mm male connector (2 pcs) with safety connector |
4 x | 1/4 Pilot "Heidi" |
3 x | 1 m servo "Premium" wire (white/red/blue) |
4 x | Metal clevis M2,5 (10 uds) |
3 x | Wing connector 8pin with pin strip, plug & socket |
2 x | 2,4x1000 mm 2:1 red termoretract tube |
3 x | Optotronix Aurora Plug |
2 x | XH female balance (2S) connector (2 pcs) |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
5 x | Spray EC Red 400ml |
2 x | Micro clevis (10 uds) |
3 x | Oracover Azul Cielo 2 m |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
3 x | 1,2x1000 mm 2:1 black termoretract tube |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
3 x | Pull-Pull complet set with CF rudder double servo arm |
3 x | 6 mm M3 variable inclined horn |
3 x | Horn 13,5x16 mm (2 pcs) |
2 x | Pilot "Goose" (Slimline) |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Conector FUTABA Servo male (10 pcs) |
3 x | Horn 16,5x20 mm (2 pcs) |
2 x | Brass control horn M2 long for wire (10pcs) |
2 x | ABS tube 6.0x5.0x1000 mm |
3 x | ABS tube 18.0x16.0x1000 mm |
3 x | Pilot "Anthony" (Slimline) |
2 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
4 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
5 x | Straightened threaded rod M3 - 1m |
5 x | ABS tube 10.0x8.0x1000 mm |
3 x | Nitroverdu 500 ml |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
4 x | Straightened rod Ø 4.5 mm x 1000 mm |
3 x | Spray adhesive AEROFIX 2 |
1 x | DPS Switch JR/JR |
3 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
3 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Monokote ROJO misil (1.8x0.65m) |
2 x | Connectors banna oro 4 mm (M/F) |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
4 x | ABS tube 16.0x14.0x1000 mm |
2 x | ABS tube 8.0x6.0x1000 mm |
2 x | XT-90 connector (pair) |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
3 x | Conector FUTABA Servo female (10 pcs) |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Pulley brass 5/1,5 (2 pcs) |
2 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
6 x | Motor DLE 200cc Premium Muffler |
4 x | ABS tube 5.0x3.0x1000 mm |
3 x | Protective Cover for wires Ø 6 mm 1000 mm |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
3 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Round Rod 1.0x3.5 cm |
3 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | XT-60 connector (female) |
3 x | Carbon fiber flat 1000x3.0x0.13 mm |
3 x | ABS tube 4.0x2.0x1000 mm |
3 x | 1/12 Pilot "Langley" |
3 x | MPX Sub-D Adaptor |
2 x | 1/10 Pilot "Jimmy" |
2 x | Pulley brass 4/1,5 (2 pcs) |
2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
5 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Small kwik link (10 pcs) |
3 x | 1,6x1000 mm 2:1 black termoretract tube |
3 x | SWTU2 switch |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
3 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
2 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
9 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Conector BEC female (10 pcs) |
3 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
5 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Connector Sub-D 2+5 Male |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
4 x | Connectors banna oro 4 mm (M/F) (ultralight) |
3 x | 1/10 Pilot "Jack" |
1 x | Swashplate metal LAMA |
2 x | XT-30 connector (pair) |
4 x | Sparkplug ROSSI R8 |
1 x | Xplorer1 anemometro |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | Extension 5 lipos JST/C |
5 x | ABS tube 3.0x1.0x1000 mm |
2 x | Mini neumatic retract landing gear |
2 x | Protective open Cover for wires Ø 13 mm 1000 mm |
2 x | Mini VISION "spread tow" CFK |
2 x | Cable coupler M2x66 (2 uds) |
4 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
2 x | Horn 5/15 with M2 Bearing |
3 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
6 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
2 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
3 x | Servo Mount S (red) |
4 x | 6 mm Quick clamp_S (10 pcs) |
4 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | Connectors banna gold 5,5 mm (M/F) |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
3 x | 4,8x1000 mm 2:1 red termoretract tube |
3 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
2 x | Marker ties (20 pcs) |
2 x | Extension 2/3 lipos JST - JST/C |
3 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
3 x | Conector JR Servo female (10 pcs) |
2 x | Profile ABS half cane 2.0x1000 mm |
4 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
3 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 20x28,5 mm (2 pcs) |
3 x | 4,8x1000 mm 2:1 black termoretract tube |
3 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
3 x | Spannlack 1000 ml |
3 x | Horn with ball 55x40 |
1 x | Futaba BLS255/272/471SV - Gear Set |
4 x | ABS tube 20.0x18.0x1000 mm |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
3 x | Connectors banna oro 3 mm (M/F) |
1 x | Ferrita 14x8x5.5 mm |
2 x | PVC 0,14 qmm servos wire Graupner (100 m) |
4 x | Horn for flap control (1 pcs) |
3 x | Aluminium wide washer M4 Gold (4 pcs) |
3 x | 12,7x1000 mm 2:1 green termoretract tube |
6 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Baseplate servo |
3 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Threaded coupler M2 (10 pcs) |
2 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
4 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | Motor mount M |
4 x | Connectors banna oro 2 mm (M/F) |
2 x | Switch moment button, 2 functions, long FUTABA |
2 x | Actuator Electric 25 mm HIGH TORQUE |
3 x | ABS tube 7.0x5.0x1000 mm |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
5 x | Brass rod Ø 1.5 mm x 1000 mm |
3 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
5 x | Straightened rod Ø 6.0 mm x 1000 mm |
6 x | Glases Nimbus |
7 x | Glases Flitemaster |
3 x | Straightened rod Ø 4.0 mm x 1000 mm |
5 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
3 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | Glases Ace |
8 x | Straightened rod Ø 3.0 mm x 1000 mm |
3 x | Straightened rod Ø 1.5 mm x 1000 mm |
4 x | Straightened rod Ø 1.0 mm x 1000 mm |
3 x | Brass rod Ø 0.8 mm x 1000 mm |
6 x | Straightened threaded rod M2-1m |
2 x | Glases Moritz |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | SPS 70V 100/200 A |
5 x | Civilian pilot "Curt" size 9cm (Slimline) |
3 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | MAX BEC 2D plus EX |
2 x | Mudguard for 140/165 mm wheels |
2 x | |
3 x | ABS angle 2,0x2,0x1000 mm |
2 x | T-Connector 4.0 mm x 1000 mm |
4 x | Connector CAN 15 |
2 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | Decorative caps, multicoloured, short |
2 x | Glases Aspen |
3 x | Glases Innovation Plus |
4 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
5 x | Straightened rod Ø 2.0 mm x 1000 mm |
8 x | Aluminium rod Ø 4.0 mm x 3000 mm |
3 x | Glases Stratus |
3 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
7 x | Straightened rod Ø 5.0 mm x 1000 mm |
4 x | Glases Nimbus "Black" |
4 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
3 x | APM2.6 Power module with 5.3V DC BEC |
4 x | Banna gold connector 2,5 mm (M/F) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
2 x | RX cabel |
1 x | Pulley brass 12/2 (2 pcs) |
2 x | Swift ARF 2000 mm Red (Hacker Model) |
4 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Extension 5 lipos JST - JST/C |
4 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
5 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
3 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | 2 LiPo XH>EH adapter |
2 x | Switch Cap M (black) |
4 x | Spark motor OS nº 8 |
3 x | Silent-blocks DLE 170M |
4 x | Horn DUBRO 1/2A |
2 x | Horn 5/20 with M2 Bearing |
3 x | Extractor piñones 2.3/3.2 mm |
3 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
6 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Cabel charger transmitter GRAUPNER |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Servo FUTABA S 3072 HV S-Bus |
3 x | Ferrita con funda |
2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
5 x | M3-M4 rubber washer (8 pcs) |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
3 x | Horn mando small (2 pcs) |
3 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | DLE 55-RA Muffler |
1 x | AXI 2808/16 V2 Long |
1 x | Pulley brass 2,5/1 (2 pcs) |
3 x | Switch Cap L (silver) |
1 x | Oracover Red 2 m |
2 x | LiPo Storage Box Standard 1 Type 1 |
2 x | 20 mm carbon horn |
2 x | 2,3 mm Prop Adapter M6 |
6 x | L-shaped servo mount |
2 x | Actuator Electric 25 mm |
1 x | Electronic switch JETI SP6 0-15v/6A |
3 x | ABS angle 5,0x5,0x1000 mm |
1 x | BU 131 Jugmann Panel Instrum. frontal |
3 x | Magnetic Interruptor MULTIPLEX |
1 x | KIRA 600-17 |
1 x | Wheel collar 2 mm Ø (4 uds) |
2 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | External LED's (2 pcs) |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | SBEC 30 D |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Magnetic Connect locking system |
1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
1 x | AXI 2814/12 V2 Long |
1 x | Flybar support metal LAMA |
2 x | Sparkplug DLE CM6 |
2 x | Spark motor OS Type F |
3 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Extension Arm for Carburetor (red) |
3 x | Civilian pilot "Gramps" size 9cm (Slimline) |
3 x | ABS "T" angle 2.0x2.0x1000 mm |
3 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Profile ABS Square 2 x 1000 mm |
1 x | 5 mm Prop Adapter M8 |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
2 x | Gearbox KPG27 5,2:1 |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | BEC extension JIVE |
2 x | 5 mm M2 variable inclined horn |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | KIRA 600-20 |
1 x | AXI 2808/24 V2 Long |
3 x | Kwik link with arm M3xM2xL24 |
1 x | La Capitania di Venetia accesories |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Cable adapter iCharger |
1 x | Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs) |
1 x | Transmitter Balancer Futaba V |
1 x | 2 mm Prop Adapter M6 |
1 x | AXI 2826/8 V2 Long |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | 2.3 mm Adapter for 30 mm spinners |
2 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
2 x | Ball link V1 Ø7 M4/3 (6 uds) |
3 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Propeller MENZ-S 18x8 |
2 x | ORACOVER transparent Yellow (10 m) |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Ply-Span 450x600/13g Black |
3 x | KIRA 480-26 5,2:1 |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
4 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
2 x | Kontronik Kosmik 30 cm Cable Kit |
3 x | 30 cm MULTIPLEX female connector |
3 x | Adapter FUN 400/480 |
2 x | Spinner propeller pleg. 40 mm / 5,0 mm |
3 x | Rudder 2_Tray 4~4.5 inch |
3 x | Connectors banna oro 3,5 mm (M/F) |
2 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
2 x | 200 Newtons FEMA absorber |
2 x | Prop Shaft Adapter 5 mm "long" |
3 x | Big Crow DLE-170M |
2 x | PSC 6 |
5 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
4 x | Horn 6/20 with M3 Bearing |
3 x | DLE 111 pipe plug |
2 x | Oracover Yellow CUB 2 m |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | KIRA 600-20 6,7:1 |
4 x | ABS angle 3,0x3,0x1000 mm |
3 x | Motor A2212/13T |
1 x | PROFI Box JETI |
2 x | Switch Cap M (red) |
1 x | Charger 220/110v |
3 x | Aluminun wheel collar 4 mm Ø (4 uds) |
3 x | 1/6 Pilot "Cindy" |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | AXI 2826/10 V2 |
2 x | Connectors MPX black male |
1 x | Transmitter Stick Ends V3 Red - M3 (2 pcs) |
2 x | Spinner propeller pleg. 42 mm / 6,0 mm |
4 x | 1/6 Pilot "Tony" |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
3 x | USBCOM 5i |
1 x | 3.2 mm Prop Adapter M6 |
3 x | PRO-HV Dual Action Valve |
1 x | MAX BEC |
3 x | Piston ring for DLE-20 RA |
2 x | PVC transparent black termo-retract battery 185 mm (1 m) |
3 x | JR silicone servo wire 0,35 qmm / 5m |
3 x | USB Mini Camera endoscope |
4 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | LS-8 GFK 6m Glider |
3 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | 5 mm Prop Adapter M6 |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
3 x | Pilot JAN 1/4 Saiplanes |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
4 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | KIRA 480-38 5,2:1 |
1 x | Esc MasterSPIN 100 Pro |
3 x | 1/6 Pilot "John" |
2 x | Ply-Span 450x600/13g Blue |
1 x | Charging Extension 50cm for 2 Battery |
2 x | ESC Ripmax QUANTUM 80A SBEC |
3 x | Metal ball clevis M3 (10 uds) |
2 x | Profile ABS half cane 2.5x1000 mm |
2 x | Hose connector stopper 4 mm |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
2 x | Muffler DLE 20-RA |
2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Esc KOSMIK 160+ HV COOL |
1 x | Neumatic retractable landing gear (Aero-Naut) |
2 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
3 x | Set freno para ruedas Dia. 127 mm |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
3 x | PVC 0,08 qmm Futaba servos wire (5 m) |
2 x | 1000 cc gasoline fuel tank complet |
2 x | LightBox SR |
3 x | Motor DLE 170 M- Paramotors |
3 x | Me-163 |
2 x | Connectors DEANS 4 pins (1 pair) |
2 x | Tube Pitot to PIXHAWK |
1 x | Blade holder metal LAMA |
4 x | 300 Newtons FEMA absorber |
3 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
1 x | Xoar Electric Beechwood Prop 12x6 |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Partall paste 650 g |
1 x | AXI 2826/6 V2 Long |
1 x | Esc X-70-OPTO-Pro |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | 3 mm Prop Adapter M6 |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Jeti Advance Pro Program Card |
2 x | Propeller MENZ-S 20x12 |
3 x | Blue silicone 0,5 qmm wire (50 m) |
2 x | MPX Support (2 pcs) |
2 x | Cable coupler M3 (10 uds) |
3 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Racor "Y" 3 mm |
2 x | PARTALL® Hi-Temp Wax, 340 g |
3 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Frontal Adapter for AXI53xx |
3 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 5 mm Prop Adapter CN-Spinner |
5 x | Mudguard wheels 112/127 mm |
1 x | Servo FUTABA S 9670 SV |
1 x | Esc MasterBasic 40SB |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Receiver replacement antenna, approx. 85 |
1 x | 10 mm Prop Adapter M12 |
1 x | Profile ABS Square 1 x 1000 mm |
3 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | 3,2 mm Prop Adapter M8 |
2 x | Profile ABS half cane 5.0x1000 mm |
1 x | DA 70 Twin Gas Engine |
3 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
2 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
3 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Cockpit plastic closing |
1 x | Gearbox KPG25 5,2:1 |
1 x | Servo MKS HV 777A+ |
1 x | EXTRA 300L 1.2 m Deep Purple |
4 x | 10 mm Quick clamp_L (6 pcs) |
1 x | wire tensioner (red) |
1 x | KIRA FAI 5F5/4s |
2 x | Brass control horn M2 large for wire (2pcs) |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
2 x | Sparkplug NGK CM6 |
1 x | PowerBox iGyro 1e |
3 x | Esc MasterBasic 70SB |
1 x | SD HC 8 GB |
3 x | Conector JR Servo female (10 pcs) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
4 x | QUANTUM II 55 Brushless Motor |
2 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | KIRA 480-38 |
1 x | Propeller MENZ-S 17x8 |
3 x | |
3 x | Receiver bed (Blue) |
2 x | Opto Gas Engine Kill Switch |
1 x | Profile ABS Square 4 x 1000 mm |
2 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | KIRA 480-34 |
1 x | Long ball link M2 (6 uds) |
1 x | Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2 |
2 x | Shaft KPG25 4,2:1 |
2 x | Esc KOSMIK 200+ HV |
4 x | Cylynder DLE 20-RA |
2 x | Micro Switch button |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | KIRA 480-31 5,2:1 |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Connectors MPX male (PIN double) |
1 x | EWC3 100 cm wing connector |
2 x | Horn mando long (2 pcs) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61 |
1 x | Three-function control switch by FUTABA |
2 x | Propeller MENZ-S 21x8 |
2 x | Oratex Natural White 2m |
3 x | 18 mm reinforced hinge |
1 x | Transmitter Stick Ends V4 Blue- M3 (2 pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
2 x | 6 mm Prop Adapter M8 |
2 x | L-Connector 1.5 mm x 1000 mm |
1 x | Rudder tandem for two Futaba servos |
3 x | Trailing leg 131 mm |
3 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | T-shape holder metal LAMA |
2 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
2 x | KIRA 400-39 5,2:1 |
2 x | Esc X-55-SB-Pro |
2 x | Bag connector 2 mm |
2 x | Extension 6 lipos XH > EH |
1 x | AXI 2814/6D V2 |
2 x | Small aluminium horn red (2pcs) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | DC-3 Douglas (White/Blue) 1800 mm |
1 x | AXI 2820/12 V2 |
3 x | Short adjustable control horn 3x24 |
3 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | PIN Connector female (100 pcs) |
1 x | AXI 2820/14 V2 Long |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
3 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | PowerBox MAG Sensor |
2 x | Oracover Orange 2 m |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | ABS tube 7.0x6.0x1000 mm |
2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | SIG Coverall 1.2x4.5 m |
1 x | MPX PCB "Gender-Changer (5 pcs) |
2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
2 x | 4 mm M3 red control terminal (4 pcs) |
2 x | Adapter SPEED 480 |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | PWC4 wing/fuselage connector for 4 servos |
3 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
2 x | 25 mm carbon servo arm |
1 x | Esc KOSMIK 160 HV |
1 x | SCHARNHORST accessories |
1 x | Piston ring for DA-60 and DA-120 |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
3 x | Sprung retractable undercarriage (Alfa model) |
2 x | JIVE 80+HV Esc |
2 x | 5 line servos wire black (1 m) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
3 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Jeti Box mini |
3 x | ABS angle 6,0x6,0x1000 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
2 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Transmitter COCKPIT SX 12 M-Link (only Tx) |
2 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Teacher-student connector T12FG/FX-30 |
2 x | Horizontal mounting servo holder |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
5 x | Servo holder for retract |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | AXI 2814/20 V2 Long |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | AXI 2826/8 V2 |
3 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
4 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | AXI 2217/16 V2 |
3 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | TMM 1210-3S heli |
2 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | MythoS 125E YELLOW/BLACK (SebART) |
3 x | 6,4x1000 mm 2:1 black termoretract tube |
2 x | Metal ring front FEMA |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
1 x | 40 mm air cylinder |
2 x | Green silicone 0,25 qmm wire (50 m) |
1 x | PYRO 750-50L Competition |
1 x | PYRO 700-45 Long Axi |
3 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
2 x | Brass control horn M4 long for wire (4 pcs) |
2 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
2 x | Switch Cap L (Red) |
1 x | Motor A40-10 L V2 14-Pole Glider |
2 x | Profile ABS half cane 8.0x1000 mm |
2 x | Ply-Span 450x600/13g Red |
1 x | Futaba 38 mm servo arm |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | Switch Cap M (silver) |
3 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Decorative caps, multicoloured |
1 x | Connectors MPX female (PIN double) |
1 x | A60-6XS V4 28-Pole |
1 x | Male connector for 16 pines AWG |
1 x | SAITO FG-36 carburetor |
1 x | Gasket set DLE-55 |
1 x | KONDOR 15-92 |
1 x | PARTENAVIA 2020 mm ARC with Flaps |
3 x | Canopy Latch |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Esc MasterSPIN 75 Pro OPTO |
2 x | Futaba 54 mm servo arm with ball link |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
2 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | AXI 2814/20 V2 |
1 x | MIG 29 3D RTF Red Start SET + Gyro |
1 x | Tail gear set (60-120 class) |
3 x | Silicone red 0,25 mm² wire (25 m) |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | T-Hose connector 4-4-4mm |
1 x | MPX screwable clips (5 pcs) |
4 x | Compact on-board starting system (9715) |
2 x | Hacker X-Pro USB interface V2 |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | BlueCom™ Adapter (iOS) |
1 x | KIRA 400-27 |
1 x | AXI 4120/14 V2 |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Long Switch On/Off micro |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Rudder forward 70x28 "type Kato" |
3 x | 120x60 mm SLH KOVO wheel |
2 x | JIVE 120+HV Esc |
4 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
2 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
2 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
3 x | XT-60 connector (male) |
1 x | Piston ring for DA-150 |
4 x | Servo HITEC D950 TW |
2 x | KIRA 600-24 6,7:1 |
1 x | Katana Mini carbon wheel pants (2 pcs) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | KIRA 480-43 5,2:1 |
1 x | Bearings for motors hacker A50 |
2 x | Piston ring for DLE-20 |
2 x | White silicone 0,25 mm² wire (25 m) |
2 x | DLE 85/111/120 Crankshaft keyway |
1 x | KIRA 600-16 |
1 x | L-Connector 4.0 mm x 1000 mm |
2 x | Glider Ka 7 Red (2540mm) |
2 x | LED blink wire flashing (blue - 2pcs) |
2 x | 20x200 mm battery rings |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
2 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | POWERBOX Magic Jeti Switch |
1 x | Servo MKS 6100 DS |
1 x | Propeller MENZ-S 15x10 |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | ABS rectangular profile 10x5.0x1000 mm |
3 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
3 x | Conector JR Servo male (10 pcs) |
2 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | MAULE M-7-420 2.8m Red |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | Carburetor DLE 170 |
1 x | Adapter SPEED 500/600 |
1 x | ZENOAH ZG 26SC with magneto ignition |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
2 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | STD excentric gearbox for 3,2mm axis (4,1:1) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | ZG231cc SHL |
1 x | Silicone black 4,0 qmm wire (25 m) |
2 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Opto Gas Engine Kill Switch |
1 x | Switch Cap L (Blue) |
1 x | Faucet FESTO |
2 x | Turbine CHEETAH 160 SE |
2 x | Contest-S-Pult-Carbon mc-20/mc-24 |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Motor A10-7 L 4,4:1 |
1 x | Esc MasterSPIN 80 Pro |
1 x | A50 Backmountset complete V3/V4 |
3 x | ABS "T" angle 6.0x6.0x1000 mm |
3 x | 1/12 Pilot "Fighter" |
2 x | Connectors MPX female |
1 x | Spinner 80 mm GFK |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Spinner 104x131 mm 115 g CFK-BS |
1 x | Wire easy tensioner (silver) |
1 x | LED wire (blue - 2pcs) |
2 x | PVC termo-retract battery 45 mm black transparent (1 m) |
2 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | 24x12 prop Super Silence |
1 x | A60 Motor Mount Alu complete set |
2 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | OPTIC 8 opto Rx-servo insulation |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
2 x | Motor B50-10L Competition + 6,7:1 |
2 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
2 x | 110x55 mm C SLH KOVO wheel |
1 x | FESTO connector M7 Quick 4mm 90º |
2 x | Regulador Jeti Jes 045 |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | Extra long horn 60x30 |
1 x | Arnes cruzado Confort de Luxe PROFI |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
3 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | wire tensioner (blue) |
2 x | Indoor hinge with servo arm integraded |
4 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | Motor DA 170 |
3 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | 3-Blade Spinner 70 x 84 mm GFK |
2 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | PYRO 800-40 Long Axi |
1 x | Transmitter Stick Ends V5 Blue - M4 JR/DX7 |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | GPS V2 Sensor for M-LINK receivers |
2 x | Xplorer2 anemometro |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
2 x | PowerBUS to BUS |
1 x | Silicone red 4,0 qmm wire (25 m) |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
1 x | Extension for SensorSwitch 60cm |
1 x | PYRO 750-50L |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | 2 piece mounting frame |
3 x | Stickers-digit for marking |
1 x | PYRO 650-103 Long Axi |
1 x | A40 Backmountset complete |
3 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Absorver mount set for 5-10 Kg models |
2 x | Servo HITEC HS-5084 MG |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Male connector for 20 pines AWG |
1 x | Propeller MENZ-S 27x10 |
2 x | PYRO 600-11 |
1 x | Reduction gear 2.8:1 for ZG 38 inline version |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | PowerBox iGyro SRS + GPS Modul |
2 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | PowerBox PROFESSIONAL |
1 x | Battery LiFe -1450/25C-3S 9.9V |
1 x | USB Interface Adapter |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | FUTABA F14 + R168DF + Servo S148 |
1 x | KIRA 500-36 6,7:1 |
1 x | Turbine LYNX 130 |
1 x | Sukhoi 29S 140" 3D Monster YELLOW/BLACK (SebART) |
2 x | Tail boom brace LOGO 480 |
1 x | AXI 2217/20 V2 Long "F5J" |
1 x | DUPLEX R7 receiver REX Assist |
1 x | Female connector for 10 pines AWG |
1 x | Servos security connector (2 pcs) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | MAMBO 17 |
1 x | Motor A30-14 M V2 6 Poles |
2 x | Spark motor OS nº 3 |
1 x | DSM 10 Dual Switch Mixer |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | PowerBUS to PWM |
2 x | BU 131 Jugmann Panel Instrum. trasero |
3 x | ESC ALPHA 60A HV |
2 x | 30 cm DEANS female connector |
1 x | TAKEO 3.6m electric |
1 x | Excentric gearbox for 2,0mm axis (3,75:1) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Esc X-75-OPTO-Pro |
2 x | Compact on-board starting system (9713) |
1 x | AXI 2808/20 V2 |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Hose clips 6 mm |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | Motor DA 100L |
1 x | Tufnol flange carburator |
2 x | ABS angle 1.5x1.5x1000 mm |
3 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
5 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | F9F Panther (Aero-naut) |
1 x | Battery FUTABA 18MZ |
1 x | STD excentric gearbox for 2,0mm axis (5,0:1) |
1 x | SERVO DES 707 BB MG |
1 x | PowerBUS Lead 30 cm |
2 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Three-position switched channel, short |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Receiver DUPLEX REX 3 2.4 GHz |
3 x | Wheel FEMA 100 mm / 6 mm |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
2 x | Rubber profile 10-2 mm 2M |
1 x | Hobbylite Filler, Balsa colour |
1 x | PowerBUS Lead 90 cm |
1 x | Receiver DUPLEX R5L EX 2.4 GHz |
1 x | Esc KOSMIK 200 HV |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
3 x | Strip 3,5x1,75x330 mm |
1 x | Set cintas unión paracaídas 145 cm |
2 x | CC 03 |
1 x | RB-45 Electronic |
1 x | Clip fixing for wing (2 pcs) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Connectors MPX black female |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Parachutist |
1 x | Electromagnets brake |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Copier 2x20 cm pcs |
2 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
3 x | Extension silicon 50 cm (Graupner) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Cross Connector 4.0 mm x 1000 mm |
4 x | Extension PVC 150 cm (Graupner) |
4 x | Extension silicon 50 cm (Futaba) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | ABS angle 10,0x10,0x1000 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | 280 cc gasoline fuel tank complet |
2 x | 12 mm floating pad (49 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Towing hook |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
3 x | ABS Strip 1.0x4.0x1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Conector Servo female 4 pines |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Extension silicon 35 cm (Futaba) |
1 x | 19 mm 2:1 black termoretract tube |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Xplorer3 anemometro |
2 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Painting GHT Lexan Black 150 ml |
2 x | |
1 x | Flat washer 1.7 mm (20 pcs) |
4 x | Extension silicon 10 cm (Graupner) |
3 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
5 x | Strip 2,0x2,0x330 mm |
4 x | Round Rod 6,0x1000 mm |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Cockpit metalic closing |
1 x | 5 mm gas motor standoff |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Red smoke canister 100 g |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Cable coupler M3 (10 uds) |
1 x | Tape GFK 25 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | M2 5Diam black ball link V2 (2 pcs) |
2 x | Gates hinge |
2 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | Ball Link Plier |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Universal Filter |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Tube bender |
1 x | 55% silver electrodes (2 pcs) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Axle for motor A20-S (3 uds) |
3 x | Aluminium wide washer M3 red (4 pcs) |
3 x | Extension silicon 100 cm (Graupner) |
1 x | Green smoke canister 65 g |
2 x | Servo NARO Max Std |
2 x | Flap hinge 33x9 mm (6 pcs) |
2 x | KingTech K45TP G4 Turboprop |
2 x | White large kwik link (10 pcs) |
1 x | 102 mm aluminium spinner |
1 x | CNC cut |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | |
1 x | CC 02 |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Motor DLE 200cc Std |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | ORACOVER Ferrari red (2 m) |
1 x | Allen wheel collar M4x4 |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Quicklock washer 4 mm (10 pcs) |
4 x | Extension silicon 75 cm (Futaba) |
1 x | Paramotor Trike XL |
1 x | Axle for motor A30-XL V2 |
2 x | 10 mm floating pad (72 pcs) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
2 x | Quicklock washer 3 mm (10 pcs) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Couple M4 for wire (10 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Yellow smoke canister 140 g |
1 x | Initior Transmitter FTX2 Wireless |
3 x | Round Rod 3,0x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Yellow smoke canister 100 g |
4 x | ABS I Strip 10x5x1000 mm |
2 x | Aluminium sheet 500x250x0,5mm |
1 x | Blind nut M6 (4 pcs) |
2 x | 1/6 Pilot "Buddy" |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
2 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Micro flex hinge (12 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Blind nut M3 (4 pcs) |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | Medidor ángulos y/o incidencias |
1 x | Dremel 3000 130W |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Oracover Green10 m |
1 x | FunCup XL RR |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Handle for PERMAGRIT lime |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | ABS tube 2.0x1.0x1000 mm |
4 x | ABS Strip 1.5x2.0x1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | LiPo Storage Box Type "BIG" |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
3 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Short ball link M2 (6 uds) |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
2 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Fixed launching hook |
1 x | Hot Glue Stick BLACK |
1 x | Kit repair carburator DLE-170 |
4 x | Circlick securite |
2 x | Aluminium servo arm (2 uds) |
2 x | Hovercraft sailcloth |
1 x | USB HLS prog. interface |
1 x | Xplorer4 anemometro |
2 x | 2,0x50 mm allen screwdriver |
2 x | Remote electric ignition system |
2 x | Manual Controller |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Connectors banna oro 6,0 mm (M/F) |
2 x | Strip ABS 2.0x10.0x1000 mm |
3 x | 15 mm floating pad (30 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Smoke set "S" |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
3 x | Futaba male 40 cm extension |
2 x | Battery EMCOTEC LiIon 3000 7.2v |
3 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
2 x | Rubber profile 6-2 mm 2M |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Metal clevis M3 (10 uds) |
1 x | Dremel PERMAGRIT 18 mm round lime |
2 x | Strip 2,5x1,25x330 mm |
1 x | 5 mm M2 variable horn |
6 x | Futaba Female 40 cm extension |
2 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
3 x | Round Rod 4,0x1000 mm |
1 x | Towing hook |
3 x | Round Rod 2,0x1000 mm |
3 x | Extension silicon 30 cm female (Futaba) |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Propeller balancer |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Connectors DEANS (T) micro |
1 x | Ring 320 mm length (5 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Hot Glue Stick RED |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Parachute PV6 for F3J |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
1 x | Green smoke canister 100 g |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | White smoke bombs AX-9 (10 pcs) |
2 x | Cable coupler M2 (10 uds) |
1 x | Blue smoke canister 140 g |
1 x | "Taxi Tank" Fuel Tank |
1 x | Vasa model Catapult |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Futaba F14 Twin Boat Stick |
3 x | Round Rod 1,0x1000 mm |
1 x | Futaba Prop Module F14 |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Ball link M3 RPA's-UAV's |
1 x | Allen wheel collar M3x3 |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Aluminium battery holder red |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Initior Receiver FRX2 Wireless |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Ply-Span 450x600/13g White |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Parachute P4 |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Dean-T Plug Mold |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Compact on-board starting system (9724) |
3 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | 25 mm Sandpaper file |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Extension 100 cm (Futaba) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | 30 cm BEC cable (male) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Angle of incidence meter |
1 x | TrainerCord (master-learner) |
2 x | HBC 10035-3 32-Bit |
1 x | Ignition for DA-35 (without pickup sensor) |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Cockpit aluminium closing |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | 20 g tin paste |
1 x | Strut Set HAWKER HUNTER 1:5,8 (without wheels) |
2 x | Oracover Black 2 m |
1 x | Yellow smoke canister 65 g |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | 140 mm rods set for direction control |
1 x | 20 mm gas motor standoff |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | 1/4 Pilot "Mike" |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Windsock Ozone L - 700 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Crimping tool |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Horn 6/27 with M3 Bearing |
1 x | Shirt Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
2 x | Buy Perforated film 100 cm / 20 m |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 3l Smoke oil |
1 x | BOEING 727, Electric brake 28mm + controller |
2 x | 20x1000 mm Ring Strap Back To Back |
2 x | MAX pilot ARTF |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | 1/6 Pilot "Garry" |
1 x | Cinta Goldfix 1m |
1 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Red smoke canister 140 g |
1 x | Heat Seal Iron |
1 x | Heli blades angle measurer |
2 x | Silicone red 0,5 qmm wire ( 25 m) |
1 x | Long ball link M3 (6 uds) |
1 x | Extension silicon 30 cm male (Graupner) |
2 x | Small flex hinge (12 uds) |
1 x | Muffler DLE-120 Right |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
5 x | Futaba Female 40 cm extension |
4 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Exhaust K45TP |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | EC-Cutter |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | SyRen 10A 6V-24V Regenerative Motor Driver |
1 x | 110x55 mm SLH KOVO wheel |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | DC-3 Douglas (DAKOTA) 1800 mm |
1 x | Horn 6/35 with M3 Bearing |
1 x | 11 mm Rubber pads (14 pcs) |
5 x | Extension silicon 25 cm (Graupner) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
2 x | Angled clevis with threaded rod M3 |
1 x | Spikes Band (5 m) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | CC 11 Conector |
2 x | Extension silicon 75 cm (Graupner) |
2 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Filler Gauges |
1 x | Aramid 50 daN 50 m |
1 x | White smoke canister 100 g |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | BEC 3A FOXY |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Brake disc Electron Retracts |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Towing hook <3m |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
4 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | 3 LiPo XH>EH adapter |
1 x | 30 cm BEC cable (female) |
1 x | Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole |
1 x | Cable coupler M2 (10 uds) |
2 x | Strip 1,5x1,5x330 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
2 x | Strip ABS 2.0x3.0x1000 mm |
2 x | Spray Graphit 33 |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Ferrita 27x14x7 mm |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Ball link M1.6 (6 uds) |
3 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Wing OXY 5,0 m2 |
1 x | Oracover Verde 2 m |
1 x | Circlick securite |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | One touch canopy lock |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Cap Hispano Aviación |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Ball link M2,5 (10 pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Ball Link Plier |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Blind nut M4 (4 pcs) |
2 x | Large flex hinge (12 uds) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Z Bender - S Type Tool |
4 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Rudder 2_Tray 3~3.5 inch |
2 x | 45 mm rods + T patellas set for direction control |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Propeller balancer |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Battery bed V2_M (black) |
2 x | Buy Perforated film 145 cm / 50 m |
3 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | Small pinned hinge (6 uds) |
3 x | HITEC Power Supply 30A. Max. 540w |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | SE Ring 300 mm (2 pcs) |
2 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Cable Cargador FUTABA |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
2 x | CC 01 |
1 x | Tow hook for tug |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | 100 mm rods set for direction control |
2 x | 25 mm reinforced hinge |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Short ball link M3 (6 uds) |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Para-RC Trike "RC-Bullix" |
3 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | SUPER DIMONA TC-80 |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Oracover White 10 m |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
2 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Bags de Luxe ULTIMATUM 2.0 |
4 x | Extension silicon 30 cm male (Futaba) |
1 x | Smoke set "Glider" |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | RS-200 Touch Programmer |
2 x | aluminium servo arm V1-JR 1,0 inch M2 |
2 x | 15 mm reinforced hinge |
1 x | 80 mm rods set for direction control |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | 45 mm rods set for direction control |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | PowerBox 12 |
2 x | JETImodel SINGLE BEC |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Tape GFK 50 mm |
2 x | Cabel "Y" 30 cm (graupner) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Softshell Hispano Aviación |
2 x | Power supply NT 25 Amp. |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Support 45% Hopper JetsMunt |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | LiPo Storage Box Type "P" |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Green smoke canister 140 g |
1 x | Cap closure 33/23.5mm (2 uds) |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | Red smoke canister 65 g |
1 x | Cut tube |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Rescue 1,8m2 / BackPack |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Universal Colour Paste deep black 250 g |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
3 x | 1/12 Pilot "Tom" |
1 x | Coupling bush 5 - 5 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Oracover White 2 m |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Electric rocket starters (6 pcs) |
2 x | Propeller CFK 14x8 Slim |
1 x | AX-60 starters (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | 15 mm gas motor standoff |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | 290 mm M5 Prop shaft |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | B4-0 rocket charges (6 pcs) |
1 x | 3,0x60 mm allen screwdriver |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Medium pin type hinge (12 uds) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Copier 5x20 cm pcs |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Digital precision scale up to 2000 g |
1 x | Ball link M3 (10 pcs, flat ball) |
2 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
4 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Angle measurer |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Para-RC Mix |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
2 x | Buy Perforated film 100 cm / 10 m |
1 x | 30 mm gas motor standoff |
2 x | 1/12 Pilot "Cougar" |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | ABS 500 x 400 x 1 mm (white) |
2 x | Gates hinge aluminium (1 pcs) |
4 x | Power supply NT 40 Amp. |
1 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Socket head long ball link M3 (2 uds) |
1 x | LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG |
1 x | Blind nut M5 (4 pcs) |
1 x | BOEING 727, Retract set for Boeing 727 |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Sealing Iron Sleeve PROF |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Long pinned hinge (12 uds) |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | DYNAMOMETER S-1580 |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | DUPLEX 2.4 EX MBar |
1 x | Tape GFK 38 mm |
1 x | Miss ULTIMATE 50E Red/Black |
2 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Starter Sullivan-STAR 601 |
1 x | Balsa panel 10x100x1000 mm |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Long ball link M1.6 (6 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Vacuum pump P1-N |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Horn F3A de Titanium 16 mm (2 units) |
2 x | Carburetor DLE 30 |
1 x | 1,5x50 mm allen screwdriver |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | XH male balance (3S) connector (2 pcs) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Field folding model stand SebArt |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
2 x | Servo Mount M (blue) |
1 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Short ball link M1.6 (6 uds) |
1 x | CM-3 |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Joint with bearing M2,5 22x5,5 |
2 x | Parachute BACKUP X100 |
1 x | Blind nut M6 (4 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
3 x | Beech dowels 3.0 x 1000 mm |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Windsock Ozone L -1200 mm |
1 x | MPX-Dean "T" Adapter |
1 x | 100x50 mm SLH KOVO wheel |
1 x | 45 mm gas motor standoff |
1 x | THERMIK XXXL 4,9m CFK Electric |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Silicone black 1,0 qmm wire ( 25 m) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Small pinned hinge (12 uds) |
1 x | Pipa 3D BULL MØ1 2.600mm |
4 x | Extension silicon 100 cm (Futaba) |
1 x | Propeller Pleg Glass-Fiber white 15x9.5 |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Adjustable brass horn threaded M3 |
1 x | "S" set for boats |
1 x | "M" set |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
3 x | Extension silicon 10 cm (Futaba) |
1 x | BOEING 727, Jet pipe for Boeing 727 |
1 x | 25 mm gas motor standoff |
1 x | AX-60 starters (5 pcs) |
1 x | SIMtransmitter 6 Mode 2 |
3 x | Prolongador S-Bus JR/JR 10cm |
1 x | White smoke canister 140 g |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Kwik link unmount tool |
1 x | Swing 1000 |
1 x | Sparkplug Saito 400 |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
3 x | Starter EM Gear Power 250 |
2 x | Axle wheel with accesories |
2 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Propeller hub spacer 8/5.5 |
2 x | Extension lead 15 cm Multiplex |
1 x | Bujia OS G5 gasolina |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Spark plug key NGK MVVS |
3 x | 200 mm extensión servo HITEC/JR |
3 x | Z-shaped servo mount |
1 x | Sparkplug 1/4-32 Glow |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Propeller CFK 12.5x6.5 |
1 x | Propeller CFK 16x17 |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Propeller RF CFK 13x6.5 |
2 x | 800TVL CMOS camera for FPV |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | Propeller CFK 14x6.5 |
2 x | Propeller CFK 15.5x10 |
1 x | PSC 5 |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
2 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
2 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Silicone black 0,75 qmm cable ( 1 m) |
2 x | Propeller CFK 14x10 |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Propeller CFK 18x17 |
3 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 14x7 |
1 x | Spinner propeller pleg. 28 mm/5,0 mm |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
3 x | Propeller CFK 15x7 |
2 x | Propeller RF CFK 13x7 |
1 x | LA500 cyclic central part |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Propeller CFK 17x18 |
1 x | Extension 2/3 lipos JST/C |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Propeller CFK 18x19 |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Propeller RF CFK 10x17 |
1 x | ABS 500 x 400 x 1,5 mm (white) |
2 x | Propeller CFK 14.5x10 Slim |
1 x | Secraft Fuel system v2, red color |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Silicone black 1,5 qmm wire ( 25 m) |
1 x | Female connector for 6 pines AWG |
1 x | Propeller CFK 16x16 Wide |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Extension 30 cm (Futaba) |
1 x | Bearing block for noseleg landing gear |
1 x | Foam plastic plates (310x210x2 mm) |
3 x | Extension 90 cm (Futaba) |
1 x | Premium servo extension 75cm |
1 x | Cable S.BUS 3 salidas 300 mm |
2 x | Cabel "Y" 15 cm |
2 x | Premium servo extension 25cm |
1 x | Premium servo extension 50cm |
1 x | Extension 7.5 cm |
1 x | Flap hinge (6 pcs) |
1 x | eFuel 30A Power Supply |
2 x | Foam plastic plates (310x210x8 mm) |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Rudder 107-06 |
1 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | Blade Holder Full (3 blades) |
2 x | Fuselage Autogyro RAINBOW |
2 x | Motor Mega AC 16/07/03 |
3 x | 4 blades set |
1 x | Motor Mega AC 16/25/06 |
2 x | Motor Mega AC 16/25/02 |
2 x | Blade Holder Full (4 blades) |
1 x | Motor Mega AC 16/20/02 |
1 x | Motor Mega AC 16/25/04 |
1 x | JETI SPIN 80 Pro |
1 x | METEOR 1.000 mm kit |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Modulo reglaje avance V3 |
1 x | FOX 3000 mm ARF (FMS) |
1 x | FUNRAY RR |
1 x | Astra (Top Model) |
1 x | Aero-Master (Aero-naut) |
1 x | Gracia (Top Model) |
2 x | VBar Control Touch, midnight black |
1 x | IKURA 4.0 m |
1 x | EASYGLIDER 4 RR |
1 x | FOX 3000 mm, Fuselage (FMS) |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | ASG 32 560 mm |
2 x | VTX 477 Carbon Rotorblade |
1 x | LOGO 600 SX (kit) |
2 x | Albatros ,spare cockpit (Top Model) |
1 x | DELPHIN Race 3.6m c64 |
1 x | Avia (Top Model) |
1 x | Fascination 3600 mm (Top Model) |
1 x | Fournier RF-4D |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Flip ARF (Top Model) |
2 x | FOX 2.300 mm V2 PNP (FMS) |
1 x | FANTASY ARF 3.2m |
1 x | BIG MOSNTER |
1 x | Astra wing Joinner (Top Model) |
1 x | Metalic nose for PROJETI |
3 x | Bungee HLG Premium |
1 x | Battery LiPo TATTU R-Line 1550 mAh 4S 14,8V 95C |
1 x | Oracover CARBON Metalic 1 m |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | |
1 x | Universal Colour Paste white 50 g |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Miniature brass strap hinge, 1 m |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
1 x | Wheel keeper washer |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | 300x4 mm M4 shaft ship |
1 x | Fiberglass landing gear for 140-160 |
2 x | Fuel line plugs (Red) |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Altimeter Altis NAO |
1 x | 90 mm rods + T patellas set for direction control |
1 x | SPS 70V 140/280 A |
1 x | Cockpit aluminium closing 4.7g |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Alu servo arm double RHINO |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | Carburetor diaphragm set DA-150/170 |
1 x | Ball bearing 6003 DLE |
1 x | BALSA triangular 6x6x1000 mm |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
1 x | Spare spinner 36 mm 3-Bl |
1 x | Motor holder for AC 28/7 |
1 x | PIX Hawk with accesories |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Electric Fuel pump |
1 x | Sensor Ignition RCEXL Universal |
1 x | Adapter lead MPX/XT60 |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | A50 Backmountset complete |
1 x | Motor Mega AC 16/35/01 |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | A30-M/L/XL Backmountset complete |
1 x | Paramotor BackPack XXS 2 |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | 26x12 prop Super Silence |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | 3-blades 29x12 carbon prop Super Silence |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Propeller POWER-PROP 12x6 |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | Parachute expulsion foam |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | Joint with bearing M2 22x5,5 |
1 x | 4 LiPo XH>EH adapter |
1 x | 2,5x60 mm allen screwdriver |
1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | Servo HITEC D954 TW |
1 x | Program card KAVAN PRO |
2 x | Servo HITEC HS-125 MG |
1 x | FESTO connector M5 Quick 4 mm |
2 x | Quick hose connector 3-3 mm |
1 x | FESTO connector M7 Quick 6 mm |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Crystal RX 35.160 Ch 76 |
1 x | SUPER CUB 2640 mm |
3 x | Servo HITEC D645 MW |
1 x | Crystal RX 35.010 Ch 61 |
1 x | Check valve quick hose connector 4-4 mm |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | MB-339 Aermachi 84" ARF c/retractil electric |
1 x | Y-Hose connector 4mm |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
2 x | MIRAGE 2000 TIGER PNP |
1 x | Propeller APC 10x6 Electric |
2 x | MB339 Freece PNP 1790 mm |
1 x | Propeller MENZ-S 15x12 |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | ESC KOLIBRI 140 HV-I |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | Boeing (TX) T-7A Camo |
1 x | Propeller APC 10x6 Glow/Gas |
3 x | 400 Newtons FEMA absorber |
2 x | Carbon plate 350x150x3.0 mm |
2 x | Turbine MAMMOTH 25.4 Kg |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | PC-21 2.880 mm BLUE French Army Scheme |
1 x | Focke Wulf FW-190A-8 93", Spinner 3Blade Scale |
1 x | Propeller APC 10x7 Glow/Gas |
1 x | MB339 Saudi PNP |
1 x | Propeller MENZ-S 18x6 |
2 x | Wheel FEMA 82 mm / 5 mm |
2 x | Propeller MENZ-S 18x12 |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Propeller CFK 15x16 |
1 x | Turbina XICOY X180 light |
1 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
1 x | Turbina XICOY X180 compact |
1 x | Receiver FrSKY Archer R8pro 2,4 Ghz |
1 x | O-Ring SAITO FG-60 R3 |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
3 x | Servo HITEC HS-55 |
1 x | Esc MasterSPIN 99 Pro OPTO |
2 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Esc X-40-SB-Pro |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
2 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Propeller CFK 11x8 |
1 x | Fuel line plugs (Silver) |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
2 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
2 x | EDGE 540-A 105" (2660 mm) |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | Muffler DLE-120 Left |
2 x | Tail wheel for 5-8 kg models |
1 x | Refueling Cap V3 Black |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | ULTRA STICK 10 cc ARF |
1 x | Canister combo DLE 120 cc |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | FuelTank Cap (blue) |
1 x | Escape O-Ring ZIMMERMANN FG-84/90 R3 |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | Gasket set DLE-120 |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
2 x | Switch Cap L (black) |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Refueling Cap V3 (RED) |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | DPSI Ampere battery backer |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
2 x | SUS wire 3m (nylon coated) |
1 x | TARANIS Q X7 |
2 x | Piston ring for DLE-55/111/222 |
1 x | Esc MasterBasic 90 Opto |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
2 x | Propeller CFK 12.75x13 |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Esc MasterSPIN 66 Pro |
1 x | SERVO DES 658 BB MG |
1 x | 26x12 BIELA 3Bl Pusher propeller |
2 x | Motor UMS Radial-5-125cc gas |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | 19x10 BIELA propeller (3-blades) |
2 x | 18x6 BIELA propeller |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
1 x | Pick up EME 55/60 cc |
1 x | Compact Silencer KOLM BX-155 |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | Glass fabric 25 g (2 m²) |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | Engine Kolm BX-155-2 with starter |
2 x | Spark Plug BRISK M14x1.25 |
1 x | 180° TUBE-ANGLE Ø 25 mm |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Interruptor SPS 70v 60/120A |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Receiver GRAUPNER GR-12 HoTT |
1 x | Manometer 4 mm |
2 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
2 x | Rear bearing for motor 35/40 cc |
1 x | Baffles for Radial Moki S180/320 mm |
1 x | Spinner 105 mm CFK |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Motor Mega AC CAR 10 PRO |
2 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
2 x | Fox 4000 mm (Airwold) |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Spinner 159x200 mm GFK |
1 x | Motor Mega AC 16/15/04 COMBAT |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
2 x | Moki Exhaust Bend 50VT |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Spinner 115 mm GFK |
1 x | Motor Moki 180 |
1 x | Swift 5050 mm (Airwold) |
1 x | Blade Holder (3 blades) |
1 x | Moki Carburetor Throttle Arm with Extension |
1 x | NF-3X-80 liner Kit |
1 x | Spinner 110 mm GFK |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Motor MOKI S 350 cc 7 cylinder |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
3 x | Extension silicon 30 cm female (Graupner) |
1 x | Motor Mega AC 22/45/02 E |
1 x | 3 blades set |
1 x | Motor Mega AC 16/07/04 |
1 x | Fuel bottle 500 ccm |
1 x | Fox 4000 mm with flaps (Airwold) |
2 x | Extension silicon 35 cm male (Futaba) |
2 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Round flex hinge (12 uds) |
1 x | Pin hinge 39x20 mm (10 uds) |
2 x | Turbo light spinner cap white 32mm |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
2 x | Bateria DJI Mini 2 2250 mAh |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Interface Realflight Simulator |
2 x | GLOW 5C + accesories |
1 x | GLOW 9C + accesories |
2 x | Starter EM Gear Power 80 |
1 x | Screw M2x8 (10 pcs) |
1 x | Lock nut M5 (20 pcs) |
1 x | BULLIT Wing 1095 mm |
1 x | BETA 1400 ARF Red |
1 x | BETA 1400 RTF Red |
1 x | Turbo Timber Evolution 1.5m PNP |
1 x | DRACO 2.0m BNF |
1 x | CESSNA 50E White/Red |
1 x | Gearbox KPG27/28 4,7:1pinion |
1 x | Fascination 3600 mm ARC |
1 x | Solarfilm Lite blue transp. 5m |
1 x | Futaba 30 mm servo rounded arm |
1 x | Hitec 38 mm servo arm |
1 x | QS Bulkhead Valve 6/6 mm |
2 x | Servo HS-5565MH High Voltage |
2 x | Servo HITEC HS-635HB Carbonite |
2 x | Servo HITEC HS-70 MG |
1 x | Servo HITEC HS-225 BB |
1 x | Gear set HITEC HS-7950TH |
2 x | Gear set HITEC HS-645MG/5645MG/5685MH |
2 x | Servo HITEC D941 TW |
2 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
2 x | Combo FOXY C3530-700 + FOXY 80 amp |
2 x | FOXY G2 C3530-700 |
2 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Wings Bags JEEMO |
1 x | Brake for 140 mm wheels |
1 x | Jeemo Dolly |
1 x | Wheel FEMA 127 mm / 6 mm |
2 x | Servo HITEC HS-645 MG |
2 x | Servo HS-7980TH digi high voltage ultra torque |
1 x | Gear set HITEC HS-225 |
1 x | Servo HITEC HS-81 |
2 x | Servo HITEC HS-5585MH |
1 x | Premium servo extension 100cm |
1 x | Servo HITEC HS-65 HB |
2 x | Servo HITEC HSB-9370TH |
2 x | Servo HITEC HS-7115 TH |
2 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Racor 4/4 mm |
2 x | Hose stopper 4 mm |
1 x | Festo 4mm Tubing Holder (10 uds) |
3 x | Gear set HITEC HS-125MG/5125MG |
3 x | Servo HITEC HS-82 MG |
2 x | Servo HITEC HS-785 HB |
1 x | Servo HITEC HSB-9360TH |
1 x | Servo HITEC HS-7954 SH Digital High |
1 x | FESTO Blanking plug G1/8 |
1 x | Festo 6mm Tubing Holder (10 uds) |
2 x | Servo HITEC HS-77 BB Low Profile |
2 x | Servo HITEC HS-5645 MG Digi |
2 x | Servo HITEC HS-7245MH |
1 x | Gear set HITEC HS-55 |
2 x | Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo |
2 x | Servo HITEC HS-5685MH |
1 x | Extension 15 cm (Futaba) |
2 x | Gear set HITEC HS-311/322/325BB |
2 x | Servo HITEC HS-7955 TG Coreless Digi |
2 x | Set Micro-horns HS-60/81/85 |
3 x | Actuador lineal HLS12-100210-7.4v |
2 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
3 x | Servo HITEC D145 SW |
1 x | Gear set HITEC HS-56 HB |
2 x | Servo HITEC D625 MW |
2 x | Gear set HITEC D645 MW |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HITEC HS-225 MG |
3 x | Servo Digital HITEC HS-5065 MG |
2 x | Gear set HITEC HS-65 HB |
1 x | Servo HITEC D-955 TW Titanium |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Gear carbonite set HITEC HS-6965 |
2 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Servo HITEC D85 MG |
3 x | USB Charger 120-240V AC |
2 x | USB Charger 12V DC for car |
2 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Compact on-board starting system (9525) |
1 x | 150 Newtons FEMA absorber |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | 100 Newtons FEMA absorber |
2 x | Servo arm with 4 mm hole to FEMA 9810A |
2 x | Wheel FEMA 152 mm / 8 mm |
3 x | Compact on-board starting system (9512) |
2 x | Propeller CFK 15x13 |
1 x | Lipo SMART 5000 mAh 4s 14.8v IC5 |
1 x | Propeller CFK 13x7.5 |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | Propeller CFK 14x8 |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Servo FUTABA SBL 471 SV |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
1 x | Cylinder-piston Assembly 30cc |
1 x | Piston ring for motor 58/116 cc |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Head Gasket 30cc (3 pcs) |
1 x | Propeller BIELA 32x14 3Bl Semi-scale Focke Wulf |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Piñon motor autostarter 35cc |
1 x | EXTRA 330 LX 2.34m ARF (LX-09) Pilot |
1 x | ULTRA STICK 30 cc ARF |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | Propeller CFK 17x13 |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Propeller CFK 18,5x12 |
1 x | Motor Saito FG-60 R3, 60 cc |
1 x | Propeller CFK 16x13 |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Motor Saito FG-100 TS, 100 cc |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | 22x12 BIELA propeller (3-blades) |
1 x | 22x10 BIELA pusher propeller |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
2 x | 26x16D BIELA 3Bl propeller (3-blades) |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | 23x8 BIELA propeller |
1 x | Motor UMS Radial-5-150cc gas |
1 x | 24x10 4Bl Scale |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | Propeller MENZ-S 17x10 |
1 x | Propeller MENZ-S 19x12 |
1 x | Propeller MENZ-S 15x6 3 blades |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Baffles for Radial Moki S250/330 mm |
1 x | Turbina DRAGON 30 Kg |
1 x | Light System |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
2 x | DJI FPV Combo |
1 x | 18m Fitting barb |
1 x | MVVS presuritation conection 26-175 cc |
1 x | Diaphragm Set Walbro 116/152cc |
1 x | 29x10 BIELA propeller 2BL |
1 x | Ø 65-75 mm canister holder |
1 x | One Way bearing for EME55 starkit with key |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Piston EME 35cc |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Stainless Steel Bend D 20x0,6mm |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Spring Clip 28 mm teflon tube |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
2 x | Selfstarr EME35 |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | AXI 4120/18 V2 |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | Air filter MOKI |
1 x | Propeller MENZ-S 17x6 |
1 x | Motor Moki 100 BVT |
1 x | MOKI S250 Intake Bend |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Motor Saito FG-14, 13,47 cc |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | DJI Mavic Air Fly More Combo |
1 x | LUCAS pilot ARTF |
1 x | GLOW 2C + accesories |
1 x | DLE Ignition unit |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Aluminium ignition bad (blue) |
1 x | Aluminium ignition bad (red) |
1 x | Ignition bed V2 Red color |
1 x | DLE 30 complete electronic ignition |
1 x | 28x10 BIELA propeller |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Kit wheel loader 966G II without electrics, without hydrauli |
1 x | Motor Mega AC 16/15/04 |
1 x | Motor A20-26 M EVO |
1 x | HITEC DPC-11 programmer |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Servo HITEC HS-85 MG |
2 x | Servo HITEC HS-85 BB |
1 x | Quick hose connector 6-6 mm |
2 x | QS Bulkhead Valve 4/4 mm |
1 x | FESTO connector M7 Quick 4 mm |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
2 x | Gear set HITEC HS-85 |
1 x | Boeing (TX) T-7A RED HAWK |
1 x | Restrictor FESTO 3/3 mm |
1 x | Motor mount class 48" |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | IKARUS plane |
1 x | Neck strap Double V2 |
1 x | Gear set HITEC HS-81 |
1 x | Receptor MINIMA 6S HITEC |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | Servo HITEC HS-45 HB |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | PC-21 2880 mm Electric Landing Gear |
1 x | PC-21 2.880 mm WHITE/RED |
1 x | PC-21 2.880 mm SINGAPUR scheme |
1 x | MIRAGE 2000 Camuflage PNP |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
2 x | Wheel FEMA 165 mm / 8 mm |
1 x | Opale Rucksack |
1 x | Propeller APC 14x7 Electric |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Racor 4/6 mm |
1 x | Racor 3/3 mm |
1 x | Quick hose connector 6-6 mm |
1 x | FESTO Filter 4 mm |
1 x | Servo HITEC HS-75BB Retract |
1 x | T-Hose connector 6-6-6 mm |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Quick hose connector 4-4 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser |
1 x | Spinner INOVA 63 mm White |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Servo HITEC D951 TW |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | MB339 CANADA PNP 1790 mm |
1 x | FELIX SportJet Red/Yellow 2200 mm |
1 x | PC-21 2880 mm Spinner 5Blade red |
1 x | VIPER SL Gold PNP 2270 mm |
1 x | PC-21 XXL 3.395 mm |
1 x | FELIX SportJet Blue 2200 mm |
1 x | PC-21 2.880 mm (w/o oracover) |
1 x | BD-5J ARF+ |
1 x | PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite |
1 x | MIRAGE 2000 RED/BLACK PNP |
1 x | BD-5J PNP |
|
337,519.58EUR |