1 x | Axle for motor A20-S (3 uds) |
1 x | Axle for motor A50-L |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Check valve V2 |
1 x | Axle for motor A30-XL V2 |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Servo NARO Max Std |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
1 x | Ignition bed V2 Red color |
1 x | GLOW 9C + accesories |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Air Trap Mounting - 175ml |
1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
1 x | 700 ml complete glow fuel tank |
1 x | 280 cc gasoline fuel tank complet |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | 7.94 x 4.76 mm tygon tube 1 m |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Piloto JET 1:3,5 |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | 18 mm reinforced hinge |
2 x | 1/12 Pilot "Tom" |
1 x | Small pinned hinge (12 uds) |
2 x | 1/4 Pilot "Heidi" |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Micro flex hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | 25 mm reinforced hinge |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Ferrita 17x10x6.5 mm |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Tube Pitot to PIXHAWK |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | 120x60 mm C SLH KOVO wheel |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | SyRen 10A 6V-24V Regenerative Motor Driver |
1 x | SE Ring 200 mm (2 pcs) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
2 x | Oracover GREY Seafire Sea 2m |
1 x | Conector JR Servo male (10 pcs) |
2 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | CM-3 |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Conector BEC female (10 pcs) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | 30 cm BEC cable (male) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | |
1 x | SE Ring 240 mm (2 pcs) |
1 x | CC 01 |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Glases Flitemaster |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Bag connector 2 mm |
1 x | 25 mm carbon servo arm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Oracover White 2 m |
2 x | 20x200 mm battery rings |
1 x | Conector JR Servo female (50 pcs) |
1 x | Motor Advance 30-10 F3A |
1 x | Motor A30-12 XL Glider |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Motor A10-7 L 4,4:1 |
1 x | AXI 2217/16 V2 |
1 x | AXI 2814/20 V2 Long |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | AXI 2814/16 V2 Long |
1 x | AXI 2820/12 V2 |
1 x | AXI 2808/20 V2 |
1 x | AXI 2217/16 V2 Long |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | AXI 2814/12 V2 Long |
1 x | Motor A20-26 M EVO |
1 x | A40 Backmountset complete |
1 x | AXI 2808/16 V2 Long |
1 x | Motor A30-12 L V4 |
2 x | Motor A200-6 |
1 x | AXI 2808/16 V2 |
1 x | Motor A50-12 L V4 |
3 x | Motor A20-20 L EVO |
1 x | Axi for MVVS 3.5 Sport |
1 x | AXI 2212/12 V2 |
1 x | Radial mount for electric 2.5-5.6 |
1 x | AXI 2217/20 V2 |
1 x | AXI 2814/16 V2 |
1 x | Motor MVVS 2.0/1120 |
1 x | Motor A50-16 S V4 |
1 x | Rotorshape Autogyro |
2 x | Bearing housing |
2 x | Screw M3x16 |
1 x | Side rudder |
1 x | Steering lever |
1 x | LA500 pilot-seat set |
2 x | Fuel line plug Small 2 pcs |
1 x | Quick hose connector 6-4 mm |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
1 x | T- Fittings red color (2pcs) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | PIX Hawk with accesories |
2 x | PPM Encoder Module |
1 x | NF-3X-80 liner Kit |
3 x | Electric Fuel Pump 12v |
1 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
1 x | T-Hose connector 3-3-3 mm |
1 x | Quick hose connector 4-3 mm |
1 x | Refueling Cup V2 Blue |
1 x | Tygon tube 9.53 x 6.35 mm 15 m |
1 x | Refueling Cap V3 (RED) |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | Tube holder |
1 x | Refueling kit for Cap "Red" |
1 x | Tubo espiral FESTO 6x1 Black |
1 x | Refueling Cap V3 Black |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Long adjustable control horn 3x34 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Small adjustable control horn with bearing |
1 x | Indoor hinge with servo arm integraded |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Short adjustable control horn 3x24 |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Small aluminium horn red (2pcs) |
1 x | Jeti Black cap |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Cable control set |
1 x | Horn with ball 55x40 |
1 x | "Taxi Tank" Fuel Tank |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Cinta Goldfix 1m |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | 2 mm female connector (2 pcs) with safety connector |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 1,5x50 mm allen screwdriver |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | 5 LiPo XH>EH adapter |
1 x | 3 LiPo XH>EH adapter |
1 x | 3,0x60 mm allen screwdriver |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Propeller balancer |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Cable with accesories |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Landing gear strap large (4 uds) |
1 x | Air pressure gauge |
1 x | Horn 6/27 with M3 Bearing |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Dual Sequencer Gear and Canopy |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Styrene plate 320x120x1.0 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Quick hose connector 3-3 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | 102 mm aluminium spinner |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | 100x50 mm SLH KOVO wheel |
1 x | 22m Fitting barb |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | 1/6 Pilot "John" |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Reed valve for DA 50-R |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Motor A20-22 L EVO |
1 x | Cooler motor type 150 |
1 x | AXI 2814/10 V2 |
1 x | AXI 2814/10 V2 Long |
1 x | Blade holder center GFK 0,5 mm |
1 x | LA500 pre-rotation gear |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | GameCommander USB Universal |
1 x | |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Extension 7.5 cm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | SAITO FG-36 carburetor |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Motor A50-14L Turnado V3 Glider |
2 x | Backmountset complete A40 |
1 x | AXI 5320/18 V2 |
1 x | Axle for AXI 4130 V2 motors |
1 x | Bearing 698-2Z for AXI 5330/xx |
1 x | Axle for AXI 2217/xx motors |
1 x | Axle for AXI 2212/xx motors |
1 x | Axle for AXI 5325/xx motors |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | MR30 connector female |
1 x | AXI 2808/24 V2 |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | AXI 2820/12 V2 Long |
1 x | AXI 2808/20 V2 Long |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | Screws flush mount M2 |
1 x | Piñon motor rotor LA-500 |
1 x | LA500 Blades |
1 x | Head core bushing |
1 x | Blade holder center |
1 x | Screws M1,6x6 Allen |
1 x | LA500 cyclic central part |
1 x | LA500 pre-rotation gear hub |
1 x | LA500 rotor head shaft |
2 x | Washer 2.2×4 |
1 x | Battery plate |
1 x | LA500 tail empennage |
1 x | Bearing 3x6x2,5 |
1 x | Servo Fork |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | EXTRA 330SC-E 95" Orange/Blue/White |
1 x | Motor mount class 48" |
1 x | Ciano KAVAN Thick 20g |
1 x | LA500 housing-upper cyclic |
1 x | SSPS105 Super Hi-Power servo |
1 x | Debonder CA 20g |
1 x | Ciano KAVAN Super Thin 20g |
1 x | KAVAN CA Activator 150ml |
1 x | Microbalon filler for CA glues. Packaging bottle 20g |
1 x | Motor mount EDGE 540 48" |
1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | Suncover 100cc Red |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
|
16,535.25EUR |