2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
2 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | PROFI TX fastening rings |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Three-function control switch by FUTABA |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | 30 cm BEC cable (female) |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Swashplate metal LAMA |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | "S" set for planes |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Antenna holder bracket double |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | SERVO HOLDER |
1 x | Strip 2,5x1,25x330 mm |
2 x | Micro flex hinge (12 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Support Filtro FESTO |
1 x | Round Rod 4,0x1000 mm |
2 x | Cable coupler M2,5 (2 pcs) |
1 x | Potenciometro micro |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Allen wheel collar M4x6 |
2 x | Soporte filtro FESTO (4 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Support FUEL DOT V3 |
1 x | Smoke set "Glider" |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Towing hook |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Maleta transporte FUTABA 10PX |
1 x | Round Rod 1,5x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Arnes cruzado Confort de Luxe PROFI |
1 x | Towing hook <3m |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Jeti Black cap |
1 x | Bag connector 2 mm |
1 x | Conector JR Servo male (10 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Switch Cap L (Blue) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Black large kwik link (10 pcs) |
1 x | Transmitter Balancer Futaba V |
1 x | Optical RPM Sensor |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Red smoke canister 140 g |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | 30 cm MULTIPLEX female connector |
1 x | 800TVL CMOS camera for FPV |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Cabling for Fox MDM1 wings |
1 x | USB Mini Camera endoscope |
1 x | Gates hinge |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Receiver FrSKY Archer R8pro 2,4 Ghz |
1 x | 140 mm rods + T patellas set for direction control |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Support ECU Xicoy X-45 |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Electric rocket starters (6 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Smoke set "S" |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | Round Rod 2,5x1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Conector JR Servo male (10 pcs) |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
2 x | Allen wheel collar M3x5 |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | 45 mm rods + T patellas set for direction control |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Crimping tool |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Ferrita 14x8x5.5 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Ball Link Plier |
1 x | Slave-cable USB Easy Sim |
1 x | DUPLEX 2.4 EX MBar |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | DUPLEX 2.4GHz GPS |
1 x | Dust collector for mould cleaning |
1 x | 5 line servos wire black (1 m) |
2 x | Propeller CFK 14x8 |
1 x | Propeller CFK 14x6.5 |
1 x | Propeller CFK 15x13 Slim |
1 x | Propeller CFK 14x10 |
1 x | Propeller CFK 12.5x7 |
1 x | Propeller electric carbon 8.5x5 |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller CFK 15x7 |
1 x | Propeller CFK 16x16 Slim |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 13x9 |
2 x | Propeller CFK 18x16 |
1 x | Propeller CFK 14x8 Slim |
1 x | Propeller CFK 11x8 |
2 x | Propeller CFK 15x15 |
2 x | Propeller RF CFK 13x7 |
1 x | Propeller CFK 15.5x10 |
1 x | Propeller CFK 18x19 |
1 x | Propeller CFK 13x7.5 |
1 x | Propeller electric carbon 7x7 |
1 x | Propeller electric carbon 9.5x7 |
1 x | Propeller POWER-PROP 13x8 |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Fuselage Bags JEEMO |
1 x | Propeller POWER-PROP 14x12 |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Small aluminium horn gold (2pcs) |
1 x | Extension 100 cm (Futaba) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Circlick securite |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | MZ-18, 9 Channel HoTT |
1 x | Extension 15 cm (Futaba) |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Cable with accesories |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Premium servo extension 50cm |
1 x | Quick hose connector 4-4 mm |
1 x | Cooler motor type 300 |
2 x | Indoor hinge with servo arm integraded |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Servo SAVOX SV-1260 MG |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Female connector for 10 pines AWG |
1 x | Male connector for 12 pines AWG |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | TARANIS X9D - plus EU/LBT FrSky |
1 x | Support XT60 conector (2 pcs) |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Hitec 20 mm servo arm |
1 x | HITEC 20 mm servo arm with ball link |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | CC 01 |
1 x | Crystal TX 35.180 Ch 78 |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Switch Cap M (red) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Jeemo Dolly |
1 x | Quick hose connector 4-4 mm |
1 x | Cooler motor type 280 |
1 x | Long pinned hinge (12 uds) |
1 x | Fiberglass motor-holder for electric motors |
1 x | Frontal support Speed 400/480 |
2 x | Receiver bed (Blue) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Metalic motor holder for class 550-600 |
1 x | Medium pin type hinge (12 uds) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Female connector for 20 pines AWG |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Servo SAVOX SB-2290 SG |
1 x | Propeller balancer |
1 x | Medidor ángulos y/o incidencias |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Angle measurer |
1 x | DYNAMOMETER S-1580 |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Round Rod 2,0x1000 mm |
1 x | Shaft sleeve LAMA |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | LOWER TOW HOOK |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | 100 mm rods set for direction control |
1 x | Switch Cap M (black) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Adjustable launching hook |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Cockpit plastic closing |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | TARANIS Q X7 |
1 x | Connectors DEANS (T) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Round flex hinge (12 uds) |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Turbine RABBIT 100 SE 11 Kg |
1 x | Propeller CFK 12.5x6.5 |
1 x | Electric starter BEE (old) |
1 x | HDT Jet Central |
2 x | Telemetry SPEKTRUM |
1 x | Propeller CFK 15x13 |
1 x | Power Pack SE Series JETCENTRAL |
1 x | Colador RABBIT |
1 x | 460 mm EPP Floats |
1 x | Fod Guard 83x32 mm |
2 x | Bluetooth Adapter JET CENTRAL |
1 x | Turbine CHEETAH 160 SE |
1 x | Turbine HORNET 85 SE |
1 x | Fod Guard 94x32 mm |
1 x | Tailormade cone A-10 Skymaster |
1 x | Turbine MAMMOTH 25.4 Kg |
1 x | Fail Safe air retract |
1 x | Propeller CFK 18x17 |
1 x | Propeller RF CFK 13x6.5 |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 18,5x12 |
|
21,785.63EUR |