1 x | Jun-Si iCharger 4010 Duo |
1 x | Gold antispark 4 mm plug |
2 x | XH female balance (3S) connector (2 pcs) |
3 x | XH female balance (2S) connector (2 pcs) |
1 x | USB Mini Camera endoscope |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | eFuel 30A Power Supply |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | Connectors banna oro 2 mm (M/F) |
1 x | Power supply NT 25 Amp. |
2 x | XH male balance (3S) connector (2 pcs) |
1 x | Connector CAN 15 |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | 30 cm DEANS female connector |
2 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Conector BEC female (10 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | XH male balance (4S) connector (2 pcs) |
2 x | Connectors DEANS (T) |
2 x | Banna gold connector 2,5 mm (M/F) |
1 x | 800TVL CMOS camera for FPV |
1 x | MPX Sub-D Adaptor |
2 x | Conector Servo female 4 pines |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | Connectors banna oro 4 mm (M/F) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Motor DLE 200cc Premium Muffler |
2 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
2 x | ABS tube 6.0x4.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | Miniature brass strap hinge, 1 m |
3 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Long pinned hinge (12 uds) |
3 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Small pinned hinge (12 uds) |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Xplorer3 anemometro |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Xplorer1 anemometro |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
2 x | Xplorer4 anemometro |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
2 x | Strip 3,5x1,75x330 mm |
1 x | Round Rod 3,0x1000 mm |
2 x | Round Rod 1,0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Angle measurer |
1 x | Ball link M2,5 (10 pcs) |
1 x | Conector BEC male (10 pcs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
2 x | Connectors MPX male |
1 x | Connectors MPX black female |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Conector JR Servo male (50 pcs) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Motor OS 3820-1200 electric |
2 x | Red 3m5 mm connector holder |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Motor holder for AC 28/7 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Cooler motor type 280 |
1 x | Landing gear retract neumatic (Jet Legend) |
2 x | Cable adapter iCharger |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | Crystal Universal RX 35.140 Ch 74 |
2 x | Servo NARO Max Std |
1 x | Head upper part |
1 x | Raer wall |
1 x | Head spacer |
1 x | Bearing 3x6x2,5 |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Epoxy Resin L (2.5 Kg) |
2 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | White gelcoat 1 Kg |
2 x | Motor DLE 430 cc - Paramotors |
2 x | resin-hardener package L-385 with hardener H-385 |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Motor DLE 170 M- Paramotors |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Gracia (Top Model) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Fascination 3600 mm, Canopy (Top Model) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | ALBATROS 3.0 m (orange/white) |
2 x | Albatros red/white (Top Model) |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Avia spare blue cockpit (Top Model) |
2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Compact on-board starting system (9713) |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Windsock Ozone L - 700 mm |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | 300 Newtons FEMA absorber |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Mudguard for 140/165 mm wheels |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 150 Newtons FEMA absorber |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | TAKEO 3.6m electric |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | BALSA triangular 6x6x1000 mm |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | FANTASY ARF 3.0m, Fundas alas |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | L-shaped servo mount |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Mini VISION "spread tow" CFK |
1 x | Round Rod 5,0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
3 x | RX cabel |
1 x | Softshell Hispano Aviación |
1 x | Connectors MPX male (PIN double) |
1 x | BULL MØ1 2.600mm "AeroPANDA" |
1 x | Cap Hispano Aviación |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | MR30 connector female |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Bag connector 2 mm |
1 x | Soporte carbono MR30 (2 pcs) |
3 x | XH female balance (5S) connector (2 pcs) |
2 x | XH male balance (5S) connector (2 pcs) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | BULL MØ1 2.600mm YELLOW |
1 x | AC-10 pre-rotacion with motor |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | Set Legs + Wheels with brake ASPIRE |
2 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Cooler motor type 300 |
1 x | BOEING 727 kit |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | Bags de Luxe ASPIRE |
1 x | VIPER JET G2 Esq. 2 White/Red |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | Tank Kevlar ASPIRE 6 L Kero |
1 x | TMM 1210-3S heli |
1 x | TMM 2512-3S heli |
1 x | Propeller MENZ-S 20x12 3 blades |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | 29x12 prop Super Silence |
1 x | 22x10 BIELA pusher propeller |
1 x | 23x8 BIELA propeller |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | Propeller APC 12x6 Glow/Gas |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Helice FOXY 22x10 2-Bl |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | Cable coupler M3 (10 uds) |
1 x | ASPIRE Red ARF 2.000 mm, Set Alas |
1 x | L-39 Albatros Scale 1:4.75 1991 mm |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | RV-8 ARF 70cc rojo/blanco/azul |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | Motor DLE 200cc Std |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
2 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Silent-blocks DLE 170M |
1 x | Big Crow DLE-170M |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Propeller MENZ-S 18x10 |
1 x | Propeller MENZ-S 20x6 |
1 x | Propeller MENZ-S 17x8 |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | 23x10 BIELA propeller (4-blades) Scale |
1 x | 26x18 BIELA propeller |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | Propeller APC 16x8 Glow/Gas |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | BETA 1400 RTF Red |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Crawler GRE-24 RTR 1:24 Arena |
1 x | |
1 x | 25 mm Sandpaper file |
1 x | Debonder CA 20g |
1 x | Ciano KAVAN Thick 20g |
1 x | Cable coupler M2 (10 uds) |
1 x | 10 mm aluminium spinner (Kavan) |
1 x | |
1 x | Focke Wulf FW-190A-8 93", Electric retract Landing gear |
1 x | Tire ODYSSEY Ø 89mm |
1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
1 x | ASPIRE Red ARF 2.000 mm, Fuselage |
1 x | ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO |
1 x | F9F COUGAR Grey ARF 1.562 mm |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
1 x | ASPIRE Red ARF 2.000 mm |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | F4E Phantom Scale 1:7 |
1 x | F4U CORSAIR 2360 mm |
1 x | Focke Wulf FW-190A-8 93", Spinner 3Blade Scale |
1 x | F-16 Scale 1:6 Camuflaje Grey (1.630mm) |
1 x | Focke Wulf FW-190A-8 93" (2362 mm) |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | FIALA Propeller 18x10 |
1 x | FIALA Propeller 24x12 |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | KIRA 480-38 5,2:1 |
1 x | KIRA 480-43 |
1 x | KIRA 400-27 |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Gear set HITEC HS-7950TH |
1 x | Gear set HITEC HS-65 HB |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | RX external cable for estandar receivers |
1 x | BEC extension JIVE |
1 x | KIRA 480-38 |
1 x | Gearbox KPG25- 5,2:1pinion |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Servo HITEC HS-225 MG |
1 x | Servo HITEC HS-225 BB |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Round flex hinge (12 uds) |
1 x | KIRA 480-34 5,2:1 |
1 x | Esc KOSMIK 210 HV-I COOL |
1 x | Gearbox KPG27 5,2:1 |
1 x | JIVE 80+HV Esc |
1 x | Adapter SPEED 500/600 |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | Gearbox KPG25 5,2:1 |
1 x | Esc KOSMIK 200 HV |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Gear set HITEC HS-225 |
1 x | Servo HITEC D951 TW |
1 x | Servo HITEC D131 MW nano |
1 x | Servo HITEC HS-311 |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Receptor MINIMA 6S HITEC |
1 x | Servo HITEC D954 TW |
1 x | HITEC DPC-11 programmer |
1 x | Gear set HITEC HS-125MG/5125MG |
|
73,321.76EUR |