1 x | 1/6 Pilot "John" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
3 x | Pilot JAN 1/4 Saiplanes |
2 x | 1/10 Pilot "Jack" |
1 x | 1/4 Pilot "Mike" |
1 x | 1/4 Pilot "Heidi" |
2 x | 1/12 Pilot "Tom" |
2 x | 1/12 Pilot "Cougar" |
2 x | Piloto Jet "Green" 1/6 Scale |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | 1/7 Pilot "Japanese" |
2 x | 1/10 Pilot "Jimmy" |
1 x | 1/6 Pilot "Cindy" |
2 x | 1/12 Pilot "Langley" |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 1/6 Pilot "Garry" |
1 x | Pilot "Goose" (Slimline) |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 2,5x1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | 1/12 Pilot "Fighter" |
1 x | Pilot "Dick" Legends Series (Slimline) |
3 x | Civilian pilot "G-Man" size 9cm (Slimline) |
2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
2 x | Xplorer1 anemometro |
1 x | Xplorer2 anemometro |
1 x | Xplorer4 anemometro |
2 x | SlowFlyer control horn (3 pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 6/27 with M3 Bearing |
1 x | Small aluminium horn blue (2pcs) |
1 x | 20 mm carbon horn |
1 x | Horn with ball 55x40 |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | DPS Switch JR/JR |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | 2 LiPo XH>EH adapter |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Connector Sub-D 2+5 Female |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | 15 mm floating pad (30 pcs) |
2 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Blind nut M5 (4 pcs) |
2 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | 10 mm floating pad (72 pcs) |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
3 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Blind nut M6 (4 pcs) |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Silent-blocks DLE 170M |
1 x | Ball link M3 (10 pcs) |
1 x | GameCommander USB Universal |
1 x | Glases Innovation Plus |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Remote electric ignition system |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Piloto JET 1:3,5 |
1 x | Suncover 100cc Red |
1 x | Power supply NT 25 Amp. |
1 x | Rocket D3-P |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Servoarm Aluminium SH-82 |
1 x | Horizontal servo holder |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Xplorer3 anemometro |
1 x | Hitec 52 mm servo arm |
2 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
2 x | Servo DITEX TD2612S |
1 x | Hitec 20 mm servo arm |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Servo holder for retract |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Servo BLS-M55B 61.2kg |
2 x | Soporte servo KST X10 mini / DS135MG |
1 x | Gear set HITEC HS-55 |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Lock nut M3 (10 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Gear set HITEC HS-7950TH |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Gear set HITEC HS-81 |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | Servo HITEC D941 TW |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | 4 LiPo XH>EH adapter |
2 x | Extension 5 lipos JST - JST/C |
1 x | Selfstart electronic switch |
2 x | 30 cm BEC cable (male) |
1 x | Multi-adapter balancer JST/C - TP |
3 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | SBEC 30 D |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Servo NARO Max Std |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | XT-30 connector (pair) |
1 x | Mounting frame MPX male connector |
1 x | CC 03 |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | SBEC 40 |
1 x | CC 02 |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | MAX BEC 2D plus EX |
1 x | Extension 2/3 lipos JST/C |
1 x | PSC 6 |
1 x | SPS 70V 100/200 A |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Interruptor RX/Batterie |
1 x | Switching module high voltage SXH |
1 x | Three-position switched channel, short |
1 x | USB interface ALTIS |
3 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
3 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
2 x | Lock nut M6 (10 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Nut for mounting M6 (4 pcs) |
2 x | Servo M2x7/16 screw (4 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Angled clevis with threaded rod M3 |
1 x | Servo DITEX EL0510M |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Soporte servo KST X08/H and Plus |
1 x | Screw M3x8(10 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 30 mm servo rounded arm |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | Futaba 20 mm servo arm |
1 x | Hitec 38 mm servo arm with ball link |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Hitec 30 mm servo rounded arm |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Horn 5/10 with M2 Bearing |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | Baseplate servo |
1 x | Propeller CFK 23x12 |
2 x | SBEC Jeti |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Switc electronic 30 Amp |
1 x | Screw M3x30 (10 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Floating M4 washer pad (36 pcs) |
1 x | Screw M3x12 (10 pcs) |
1 x | MZ-12, 6 Channel HoTT |
1 x | Decorative caps, multicoloured |
1 x | Canopy Latch |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Hose clips 6 mm |
1 x | Mini Infrared Thermomiter |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | 3 LiPo XH>EH adapter |
2 x | Adapter lead MPX/EC3 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | RX cabel |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | SD HC 8 GB |
1 x | Propeller hub spacer 8/5.5 |
1 x | Propeller CFK 16x17 |
1 x | Propeller Pleg CAM Carbon 11x7 |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
2 x | Lock nut M5 (10 pcs) |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Lock nut M2 (10 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Nylon Screw M4x20 |
1 x | Nylon Screw M6x40 |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Lock nut M2 (20 pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Nylon Screw M5x30 |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
|
12,124.90EUR |