1 x | Nut M1,6 |
1 x | Screw M3x16 |
1 x | Nut M2 securing |
1 x | Head upper part |
1 x | Head core bushing |
1 x | Bearing 3x6x2,5 |
1 x | Cierva C30 Elevator |
1 x | Servo Fork |
1 x | Screws M1,6x6 Allen |
1 x | Head lower part New |
1 x | Carbon blade 230 mm |
1 x | Conector JR Servo male (50 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | 100 mm rods set for direction control |
1 x | DSM 10 Dual Switch Mixer |
1 x | TARANIS Q X7 |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | RX TARANIS V8FR-II HV 2.4 GHz |
1 x | 3l Smoke oil |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
2 x | Bag JETI Duplex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Premium servo extension 100cm |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Conector BEC male (10 pcs) |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | Conector MT-60 (pair) |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | 2,5x60 mm allen screwdriver |
1 x | SE Ring 330 mm (4 pcs) |
1 x | 2,0x50 mm allen screwdriver |
1 x | Switch for DS: Long 3 Position |
1 x | JETI transmitter DC-14 II Blue Multimode |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
2 x | Support Flush MPX Conector (6 pcs) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Emisora JETI Duplex DS-16 II Carbon Line YELLOW |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | "S" set for planes |
1 x | B4-0 rocket charges (6 pcs) |
2 x | Hand Pads for Tray JETI |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Blade Holder (3 blades) |
2 x | 4 blades set |
1 x | Premium servo extension 75cm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Dust collector for mould cleaning |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | 45 mm rods + T patellas set for direction control |
1 x | JETImodel DPS 40 |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Support FUEL DOT V3 |
2 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Conector BEC female (10 pcs) |
1 x | 30 cm MULTIPLEX female connector |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Bag connector 2 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Tape GFK 50 mm |
2 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
2 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Parachute expulsion foam |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Yellow smoke canister 100 g |
1 x | Prolongador S-Bus JR/JR 20cm |
2 x | Mounting Stickswitch |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Screws of the Back Cover for DS14/16/24-Tx (8pcs.) |
2 x | JETI handheld transmitter DS-14 II Green Multimode |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Conector XT-30 (hembra) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
2 x | Car Charger DC/DS-16 |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Support pumb/filter Xicoy X45 |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Dremel 3000 130W |
1 x | Angle support XT60 conector |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Emisora HORUS X10S Carbone Fiber |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Cierva C30 simulated motor |
1 x | Complet landing gear |
1 x | Hitec 52 mm servo arm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Servo safety connector (10 pcs) |
1 x | Hitec 38 mm servo arm |
1 x | Motor Mount for Multiplex FunJet |
1 x | Servo HITEC D951 TW |
1 x | Motor mount for 1 m models |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Servo MKS HBL380 |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Power supply NT 25 Amp. |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Metalic motor holder for class 550-600 |
1 x | Servo HITEC HS-225 BB |
1 x | 10 mm gas motor standoff |
1 x | Electric coversion set |
1 x | Hacker A30-S Radial Set |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | |
1 x | Fan for A60 |
1 x | |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Motor mount for 1200 mm models |
1 x | Gear set HITEC HS-85 |
1 x | Servo HITEC D941 TW |
1 x | Crystal RX 35.120 Ch 72 |
1 x | Gear set HITEC HS-81 |
1 x | Motor holder for AC 28/7 |
1 x | Central support Speed 600 |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller electric carbon 9.5x7 |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
1 x | Propeller electric carbon 8.5x6 |
1 x | Propeller electric carbon 10.5x8 |
1 x | 12x6 tree blades propeller |
1 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Porpeller HUNTER 400 |
1 x | 25 mm carbon servo arm |
1 x | Servo MKS HV1220 |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Servo Mount S (red) |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Rudder 2_Tray 4.5~5 inch |
2 x | Blade Holder Full (4 blades) |
2 x | Blade Holder Full (3 blades) |
2 x | Tail tube RAINBOW |
1 x | Blue smoke canister 140 g |
1 x | JETI handheld transmitter DS-14 II Blue Multimode |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Vacuum pump P1-N |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Ball Link Plier |
1 x | Fuselage Autogyro RAINBOW |
1 x | Ball Bearing Oil 25 ml |
1 x | |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | |
1 x | Cut tube |
1 x | AXI 2204 Multicopter |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Red 4 mm connector holder |
1 x | Connectors DEANS (T) |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | Transmitter JETI Duplex DS-12 EX Multimod RED |
1 x | Switch Spring-Loaded 2-Position DC Tx DUPLEX 2,4EX |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | Switch for DS: Long 2 Position |
2 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
1 x | Hot Glue Stick RED |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | Schul-Malpinsel Gr.5 |
1 x | Extension 90 cm (Futaba) |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | "M" set |
1 x | Blue smoke canister 100 g |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark ORANGE Multimo |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Charger SKY RC e680 |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Glass fabric 25 g (2 m²) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Ciano KAVAN Thick 20g |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Allen wheel collar M3x5 |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Adaptadores carga 6s JST-XH |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Z Bender - S Type Tool |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | ESC ALPHA 60A HV |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | 3 blades set |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Protector Connector MPX (1 pair) |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Chopped glass fibre strands 0.2 mm |
2 x | XT-60 connector (female) |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Connector CAN 15 |
1 x | Transmitter JETI Duplex DS-12 SE Carbon RED |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Tool for entel |
1 x | Sealing Iron Profi LCD |
1 x | DS-12/14/16 - Black nuts for upper switches - Front panel (2pcs) |
1 x | Switch Nutspanner for JETI Duplex Transmitter DC / DS |
1 x | Jeti Advance Plus Program Card |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Premium servo extension 25cm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | JETImodel SINGLE BEC |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | DEMON CORTEXpro |
1 x | Teacher / Student Cable |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Screws of the Back Cover for DC Tx (10pcs.) |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Power Box GPS Sensor III |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Extension 7.5 cm |
1 x | PowerBox MagSensor red connector |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Hexagonal ball head 2.0 x 50 mm |
|
26,362.77EUR |