1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
3 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | BALSA triangular 15x15x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
4 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
2 x | Rescue 1,8m2 / BackPack |
2 x | Parachute PV6 for F3J |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Parachute BACKUP X100 |
2 x | Hot Glue Stick BLACK |
2 x | Starter 12v (Max 180 and 30ccm) |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Cut tube |
1 x | Ball Link Plier |
1 x | MAX pilot ARTF |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | Para-RC Mix |
2 x | Starter Sullivan-STAR 601 |
2 x | Wing OXY 5,0 m2 |
2 x | Wing OXY 0,5 pulgadas2 |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | 2,5x60 mm allen screwdriver |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Crimping tool |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Vacuum pump 12 CFM |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Para-RC Trike "RC-Bullix" |
3 x | 3,0x60 mm allen screwdriver |
4 x | Paramotor BackPack XXS 2 |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | |
2 x | Hot Glue Stick RED |
1 x | Ball Link Plier |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
2 x | Starter EM Gear Power 80 |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Set cintas unión paracaídas 145 cm |
2 x | Opale Rucksack |
3 x | Screwdriver for Torx® TX8 |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Z Bender - S Type Tool |
1 x | Z Bender - S Type Tool |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | 1,5x50 mm allen screwdriver |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
3 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Digital precision scale up to 2000 g |
2 x | Ballast 700gr OPALE |
1 x | Digital scale up to 40 kg |
2 x | |
2 x | Motor A2212/13T |
2 x | Motor DLE 200cc Std |
1 x | Motor DLE 170 M- Paramotors |
1 x | Oracover light Grey 2m |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | USB HLS prog. interface |
1 x | 5 LiPo XH>EH adapter |
1 x | Xplorer2 anemometro |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
2 x | BALSA trip 10x10x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | HV6150 Digital Servo |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Servo MKS HBL380 |
1 x | Futaba 30 mm servo rounded arm |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Motor DLE 430 cc - Paramotors |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Metal gear set for HS81MG/5082MG |
1 x | Servo MKS HV1220 |
1 x | Horizontal servo holder |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Hitec 30 mm servo rounded arm |
2 x | Servo AN-8 HBA |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Adapter rotula M3 |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Gear for D 200 BX |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | CA Glue fast 20g |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
2 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | FOAM - CURE™ (24g) |
1 x | UHU hart 35 g |
1 x | Cabel "Y" 15 cm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Extension 15 cm (Futaba) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Pegamento Pu R 50g polyuretano |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Circlick securite |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Tube bender |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | XT-60 Plug Mold |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Glass fibre sleeve Ø 20 mm |
2 x | Chopped glass fibre strands 3 mm |
2 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Aramid 50 daN 50 m |
1 x | EC-Cutter |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Glases Nimbus |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Glow/Gas/Smoke/Kerosene filter |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Me-163 |
1 x | Propeller POWER-PROP 13x10 |
1 x | AX-60 starters (5 pcs) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Micro Crystal RX 35.010 Ch 61 |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | Propeller APC 14x10 Electric |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Roller cutter 28 mm |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Axle for motor A50-L |
1 x | Kwik link unmount tool |
1 x | A60-6XS V4 28-Pole |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Welder 100W/200V |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | LUCAS pilot ARTF |
1 x | Servo BLS-M55B 61.2kg |
1 x | ALU servo arm 3 mm shaft |
1 x | ALU double servo arm 3 mm shaft |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Servo Mount S (red) |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Propeller POWER-PROP 11x8 |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | Porpeller HUNTER 400 |
1 x | 15x7 tree blades propeller LEFT |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Blade holder metal LAMA |
1 x | Carbon blade 230 mm |
1 x | Shaft sleeve LAMA |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Hovercraft sailcloth |
1 x | GameCommander USB Universal |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | PPS-4D Propeller |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | Indoor Brushed motor kit |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Propeller POWER-PROP 13x8 |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Propeller APC 13x8 Electric |
2 x | Smart Soldering Iron 110W/230V AC |
1 x | Propeller APC 12x8 Electric |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Propeller APC 11x8.5 Electric |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Sealing Iron Sleeve STD |
1 x | 4 LiPo XH>EH adapter |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Cable adapter iCharger |
1 x | Steel brush wheel with 2.35mm |
1 x | Backmountset complete A40 |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | A60 Motor Mount Alu complete set |
1 x | Shaft for A60-L (140mm) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Heat Seal Iron |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Propadapter for motor A50-V3 |
1 x | 2,0x50 mm allen screwdriver |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Blades 330mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
|
29,485.31EUR |