2 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | 1000 ml sealer (DOPE) |
2 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Universal Colour Paste deep black 50 g |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Spray EC Red 400ml |
2 x | Release wax 250ml |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Universal Colour Paste deep black 250 g |
1 x | Hobbylite Filler, Balsa colour |
1 x | Universal Colour Paste white 50 g |
2 x | Paint gun for sprays |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Spannlack 1000 ml |
2 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | |
1 x | Spray adhesive AEROFIX 2 |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Canopy Latch |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Propadapter for motor A50-V3 |
1 x | Axle for motor A20-S (3 uds) |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Copier 5x20 cm pcs |
1 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Sanyo RX Battery Eneloop 6,0 V JR |
2 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | Nitroverdu 500 ml |
2 x | Partall paste 650 g |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Propeller POWER-PROP 7x7 |
2 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Quick hose connector 4-4 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Pushrod octagone 3/2 |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | NF-3X-350 set |
1 x | Pushrod octagone 4/3 |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Xplorer4 anemometro |
1 x | Towing hook |
3 x | 5 LiPo XH>EH adapter |
1 x | Connector Sub-D 2+5 Female |
3 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
3 x | Adapter lead MPX/EC3 |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | 4 LiPo XH>EH adapter |
3 x | BEC 3A FOXY |
2 x | CC 01 |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
3 x | Battery charging cable XT60 |
2 x | USB HLS prog. interface |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Allen wheel collar M3x5 |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Heat sink for Optotronix LEDs |
1 x | Landing lights 18 mm (0.71in) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | BD-5 Pro ARF |
2 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Sanyo TX Battery Eneloop 9,6 V 2500 mAh |
2 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
2 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | MB339 Freece PNP 1790 mm |
1 x | Propeller Pleg CAM Carbon 11x6 |
1 x | Propeller Pleg CAM Carbon 12x11 |
1 x | VIPER SL Thunderbird PNP 2270 mm |
1 x | JP Hobby ER-120 Tricycle FELIX JR |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | Tap FESTO 4-4 mm |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Nylon threaded block M6 (2 uds) |
1 x | FELIX JR Yellow/Black 1750 mm |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | FELIX SportJet Red/Yellow 2200 mm |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
1 x | PC-21 2.880 mm WHITE/RED |
1 x | PC-21 2.880 mm (w/o oracover) |
1 x | Propeller Pleg CAM Carbon 12x8 |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | BD-5J PNP |
1 x | Hose connector stopper 4 mm |
2 x | Landing gear strap large (4 uds) |
1 x | Blade holder metal LAMA |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Landing gear strap small (4 uds) |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Spikes Band (5 m) |
1 x | Blue smoke canister 140 g |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | EWC3 100 cm wing connector |
2 x | Dean "T" - Futaba Adapter |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | CM-3 |
1 x | 2 LiPo XH>EH adapter |
2 x | Cabel charger transmitter GRAUPNER |
2 x | Adapter lead MPX/XT60 |
1 x | Micro Switch button |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | T-shape holder metal LAMA |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | 10 mm Prop Adapter M12 |
1 x | 4 mm Prop Adapter M8 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Red smoke canister 65 g |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Racor 2/3 mm |
1 x | Extension 6 lipos XH > EH |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Circlick securite |
1 x | CC 05 |
1 x | Short Switch On/Off micro |
1 x | Opto Gas Engine Kill Switch |
1 x | Connector Sub-D 2+5 Male |
1 x | Multi-adapter balancer JST/C - TP |
1 x | SPS 70V 100/200 A |
1 x | DPSI Ampere battery backer |
2 x | MPX-Dean "T" Adapter |
1 x | Three-position switched channel, short |
1 x | USB interface ALTIS |
1 x | Male connector for 10 pines AWG |
1 x | Extension 5 lipos JST/C |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | 30 cm BEC cable (female) |
1 x | Switc electronic 30 Amp |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Long Switch On/Off micro |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | JETImodel SINGLE BEC |
1 x | Female connector for 12 pines AWG |
1 x | Extension 5 lipos JST/C - JST |
1 x | SBEC 40 |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Opto Gas Engine Kill Switch |
1 x | 30 cm BEC cable (male) |
1 x | Switching module high voltage SXH |
1 x | Male connector for 12 pines AWG |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | EWC3 40 cm wing connector |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | 3 LiPo XH>EH adapter |
1 x | Resistor 3W 5% OR82 |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Rafale C (Aero-naut) |
1 x | Canadair CL-415 (aero-naut) |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Epoxy 30 min. 200g |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Turbo Timber Evolution 1.5m PNP |
1 x | BULLIT Wing 1095 mm |
1 x | Skyray (RBC Kits) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Epoxy 40 min (Hardener). 1 Kg |
2 x | resin-hardener package L-385 with hardener H-385 |
1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | CESSNA 50E White/Red |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | WINGO 2 PNP |
1 x | DRACO 2.0m landing gear |
1 x | Mini AVANTI S EDF 80MM RTF |
1 x | JOKER 3 1550mm |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | DRACO 2.0m Helice 14.5x9 4-Blade |
1 x | Freewing F-14 Tomcat Twin 80mm EDF PNP (Deluxe Edition) |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | EDGE 540 V3 (Superlite) ORANGE |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | MAULE M-7-420 2.8m Red |
1 x | F9F Panther (Aero-naut) |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
|
32,679.15EUR |