3 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
3 x | Ball Link Plier |
2 x | Hot Glue Stick BLACK |
2 x | Z Bender - S Type Tool |
3 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
5 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Starter Sullivan-STAR 601 |
3 x | Digital precision scale up to 2000 g |
1 x | Screwdriver for Torx® TX8 |
1 x | |
3 x | Dust collector for mould cleaning |
2 x | 2,5x60 mm allen screwdriver |
1 x | Starter 12v (Max 180 and 30ccm) |
2 x | Screwdriver for Hexagon 1,27mm |
3 x | Copier 2x20 cm pcs |
4 x | Cut tube |
2 x | Copier 5x20 cm pcs |
1 x | Vacuum pump P1-N |
2 x | Hot Glue Stick RED |
3 x | Crimping tool |
3 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Screwdriver for Hexagon 1,5mm |
2 x | |
2 x | Starter EM Gear Power 80 |
1 x | Digital scale up to 40 kg |
3 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Covered closure or fairings |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | One touch canopy lock |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | PIX Hawk with accesories |
1 x | Cap Hispano Aviación |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
4 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Flap hinge (6 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Gates hinge |
3 x | Micro flex hinge (12 uds) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Power supply NT 40 Amp. |
2 x | Small pinned hinge (12 uds) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
4 x | Long pinned hinge (6 uds) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Xplorer1 anemometro |
1 x | Xplorer3 anemometro |
1 x | Xplorer2 anemometro |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Premium servo extension 100cm |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Ball link M3 (10 pcs) |
1 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Welder 100W/200V |
2 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
3 x | Fresa corte diamante Ø 2.3mm (bola) |
3 x | 3,0x60 mm allen screwdriver |
3 x | Concave-Convex sandpaper file 13 mm |
2 x | Digital weight, angle and balance meter BASIC |
3 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support pump Xicoy X45 |
2 x | MPX 8 pins plug mold |
1 x | Mini-handed clamp |
1 x | Kwik link unmount tool |
1 x | Tube support Ø 6mm (10 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
3 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Socket Head Screw M2x8 |
2 x | Lock nut M6 (10 pcs) |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
2 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Screw M4x30 (10 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Cooler motor type 400 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Tip wing protector 40x14 (2 pcs) |
2 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Socket Head Screw M2,5x12 |
3 x | Ball Link Plier |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Hexagonal Nut M4 (20 pcs) |
2 x | 1,5x50 mm allen screwdriver |
1 x | Screw M3x16 (10 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
2 x | Indoor Brushed motor kit |
1 x | Motor holder for AC 28/7 |
2 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | PPM Encoder Module |
1 x | 15 mm reinforced hinge |
1 x | Small pinned hinge (6 uds) |
4 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Medium pin type hinge (12 uds) |
1 x | Vest clothes Hispano Aviación |
2 x | 25 mm reinforced hinge |
1 x | Electric Fuel Pump 12V |
1 x | GLOW 9C + accesories |
1 x | Long pinned hinge (12 uds) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Compact on-board starting system (9713) |
1 x | Sparkplug NGK CM6 |
1 x | Ignition bed V2 Red color |
2 x | 18 mm reinforced hinge |
1 x | Horn with ball 55x40 |
1 x | Horn with ball 40x30 |
1 x | Horn mando small (2 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn mando long (2 pcs) |
1 x | ARS 300 91" ARF 2311mm ORANGE |
1 x | Long horn 50x26 |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | EXTRA 330L 35% hardware pack (Precision Aerobatics) |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Micro control horn T2 Ø 1 |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Small aluminium horn red (2pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 1/6 Pilot "Garry" |
1 x | Pilot "Goose" (Slimline) |
1 x | 1/12 Pilot "Tom" |
2 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
3 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Smoke pump RCEXL |
1 x | Compact on-board starting system (9512) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Spark plug key NGK MVVS |
1 x | Compact on-board starting system (9724) |
1 x | Pin hinge 39x20 mm (10 uds) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Robart Door Hinge (Pk2) |
1 x | Telemetry interface ALTIS 12 cm |
5 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
2 x | Heli blades angle measurer |
2 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
2 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Air Intake manifold 90° - Large |
5 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
2 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
3 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
3 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
4 x | Pistola termica MH 550 micro |
2 x | Mini Lock Grips 2PCS |
1 x | Screwdriver for Torx® TX6 |
3 x | Dremel PERMAGRIT thin lime |
1 x | Propeller diller 5/6,3/8/9 |
2 x | Rubber Insert soft, 1 Pcs. |
3 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Roller cutter 28 mm |
1 x | 100g Flux Paste for Silver Solder |
3 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Sandpaper file 13 mm |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
2 x | Tube bender |
1 x | Starter EM Gear Power 250 |
2 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Llave dinamomterica 74 Z 0 0 21 |
2 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Heli blades angle measurer |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Micro Crystal RX 35.010 Ch 61 |
1 x | Motor mount VANQUIST 48" F3A |
1 x | Metalic nose for PROJETI |
1 x | Blind nut M4 (4 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | MAMBO 17 |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Dryfluid suet for reducing |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Motor OS 3820-1200 electric |
1 x | Quick hose connector 4-4 mm |
1 x | BU 131 Jugmann ARC |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | DPSI V-Match |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
2 x | Threaded insert M3 (4 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Socket Head Screw M2x10 |
1 x | DPSI RV Mini 6 (2008) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | DPSI Micro - RCS |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
1 x | Emcotec SPS Magnetic Switch Actuator |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | |
1 x | Screw M2.5x10 (10 pcs) |
1 x | EWC3 40 cm wing connector |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | 20 mm carbon horn |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Window mounting channel 5m |
1 x | DPSI RV Mini 5 (2008) |
1 x | Filter Capacitor JR |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | 6 mm M3 variable inclined horn |
1 x | 5 mm M2 variable horn |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Tap FESTO 6-6 mm |
1 x | Quick hose connector 3-3 mm |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | KAVAN Hand crank fuel pump |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | PowerBox Smokepump |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | Large flex hinge (12 uds) |
1 x | T-Hose connector 3-3-3 mm |
1 x | GPS Altis |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | 2,0x50 mm allen screwdriver |
1 x | Dean-T Plug Mold |
1 x | Crimping tool |
1 x | Cylinder DA-50R, DA-100, DA-100L |
1 x | Handle for PERMAGRIT lime |
1 x | Carb spacer mounting block ,red DA-60/70 |
1 x | Mold plugs XT-30 |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
2 x | Propeller diller for DLE111 and DA85-150 |
1 x | Exhaust gasket DA-35 and DA-70 |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | 55% silver electrodes (2 pcs) |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Dremel 3000 130W |
1 x | Gasket, from reed valve carrier to carb carrier DA-150L/170 |
1 x | Cylindergasket DA 170 |
1 x | Tachometer Hyperion Multi-pala |
1 x | Mini Infrared Thermomiter |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Hifht speed needle DA-50R/100I |
1 x | Carburator spacer block DA-50R |
1 x | Carburetor for DA150L/170 |
1 x | Gasket, Aluminium-Plate >reed valve carrier DA-170 |
1 x | Crankshaft DA-120 |
1 x | Heli digital angle measurer |
1 x | Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece |
1 x | Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Cylinder Gasket set for DA-60 / DA-120 |
1 x | Tachometer HANGAR 9 digital |
1 x | Low speed needle DA-50R/100I |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Precision wrench L100 mm |
1 x | Cylinder for DA-60 and DA-120 |
1 x | Aluminium-screw, M5x16mm Red |
1 x | Hot Glue Stick GREEN |
|
17,145.51EUR |