1 x | Ventus 1:4 set of instruments |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
3 x | Cable with accesories |
1 x | Xplorer1 anemometro |
2 x | Horn 20x28,5 mm (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Horn for flap control (1 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Horn 6/27 with M3 Bearing |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | Cap closure 33/23.5mm (2 uds) |
2 x | 6 mm aluminium horn with patella |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Covered closure or fairings |
1 x | One touch canopy lock |
1 x | Xplorer3 anemometro |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Threaded coupler M2 (10 uds) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Couple M4 for wire (10 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
3 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
3 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Cap Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | Shirt Hispano Aviación |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Brass control horn M4 long for wire (4 pcs) |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | Horn mando long (2 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
4 x | Horn with ball 40x30 |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Horn with ball 55x40 |
1 x | Suncover 100cc Red |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Small aluminium horn gold (2pcs) |
1 x | Rudder forward 80x28 "type Kato" |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Long horn 50x26 |
1 x | 6 mm M3 variable horn |
2 x | Horns indoor |
1 x | Extra long horn 60x30 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Recessed MPX connector support (6 pcs) |
2 x | 5 mm M2 variable horn |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Fiberglass plate 350x150x0.5 mm |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Chopped glass fibre strands 3 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Tacometer mini ignition RCEXL |
1 x | Large flex hinge (12 uds) |
1 x | Small pinned hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
2 x | Miniature brass strap hinge, 1 m |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Propeller diller for DLE170 |
1 x | SERVO HOLDER |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Cable coupler M2 (10 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Propeller POWER-PROP 13x9 |
1 x | Blocking screws M6 gas engine |
1 x | Tubo espiral FESTO 6x1 Black |
1 x | Propadapter for motor A50 |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Racor 2/3 mm |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Angled clevis with threaded rod M3 |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Blades 330mm |
1 x | Fuel tank 1500ml (50oz) |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | 1000 cc gasoline fuel tank complet |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | BlueCom™ Adapter (iOS) |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn mando small (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 45 mm rods set for direction control |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Short adjustable control horn 3x24 |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Long adjustable control horn 3x34 |
1 x | Smoke Oil Blue 5 l |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Extension for SensorSwitch 60cm |
1 x | Control horn long w/ball |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | AXI 2826/10 V2 |
1 x | Propeller MASTER 6x4 |
1 x | AXI 2820/12 CYCLONE |
1 x | Motor A20-22 L EVO |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Motor A40-10S V4 14-Pole |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Propeller 12x6 Falcon electric |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Metal clevis M3 (10 uds) |
1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
1 x | Tube holder |
1 x | Refueling Cap V3 (RED) |
1 x | Quick hose connector 6-6 mm |
1 x | EME 55 cc carburetor WALBRO |
1 x | Propeller APC 10x4.7 SF |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Micro control horn (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | AXI 2212/12 V2 |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Propeller MASTER 7x6 |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | AXI 2820/10 V2 |
1 x | AXI 2820/12 V2 Long |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | 11x7 tree blades propeller |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller POWER-PROP 15x8 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | AXI 2814/10 V2 |
1 x | Propeller MASTER AIRSCREW 13x6 |
1 x | Propeller POWER-PROP 11x9 |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Micro clevis (10 uds) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | White large kwik link (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Propeller MASTER 6x3 |
1 x | Motor A30-12 L V4 |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Propeller APC 12x6 Electric |
1 x | Propeller APC 11x10 Electric |
1 x | T-Hose connector 4-4-4mm |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 12x10 Glow/Gas |
1 x | Propeller APC 10x6 Electric |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Support 45% Hopper JetsMunt |
1 x | Quick hose connector 6-4 mm |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | DLE 55 carburetor |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Smoke pump RCEXL |
1 x | Electric Fuel pump |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
|
10,486.28EUR |