2 x | Horn mando long (2 pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | 6 mm aluminium horn with patella |
2 x | 5 mm M2 variable inclined horn |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | 5 mm M2 variable horn |
1 x | 6 mm blue aluminium threaded horn with patella |
2 x | Horn DUBRO 1/2A |
1 x | Horn 16,5x20 mm (2 pcs) |
3 x | Brass control horn M2 large for wire (2pcs) |
2 x | Horn mando small (2 pcs) |
2 x | Extra long horn 60x30 |
1 x | Cable with accesories |
2 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Cable control set |
1 x | 20 mm carbon horn |
3 x | Brass control horn M2 long for wire (10pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Long adjustable control horn with bearing |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
2 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Short adjustable control horn 3x24 |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Horns indoor |
1 x | GameCommander USB Universal |
1 x | Horn 5/20 with M2 Bearing |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
2 x | Control horn long w/ball |
1 x | Horn 6/20 with M3 Bearing |
2 x | Horn 6/27 with M3 Bearing |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Servo FUTABA BLS 276SV |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Hitec 52 mm servo arm |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Programador FUTABA USB CIU-3 |
1 x | Servo HITEC D645 MW |
1 x | Servo HITEC HS-311 |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Hitec 38 mm servo arm |
1 x | Servo BMS-4112 |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | ALU servo arm 3 mm shaft |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | ALU double servo arm 3 mm shaft |
2 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Ferrita 14x8x5.5 mm |
2 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
2 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Ball link M2 (10 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
2 x | Panel Honeycom carbon 350x150x3.5mm |
2 x | Glass fibre sleeve Ø 20 mm |
2 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Blade holder metal LAMA |
1 x | Propeller APC 12x10 Electric |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 11x8.5 Electric |
1 x | Propeller APC 13x4 Electric Pusher |
1 x | Propeller APC 11x5.5 Electric |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Propeller APC 10x4.7 SF |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller 9x7 SlowFlyer |
1 x | Cooler motor type 150 |
1 x | Retract undercarriage |
1 x | Horizontal servo holder |
2 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
1 x | Falcon Carbon Spinner 82mm for electric motor |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Propeller 3x2 |
1 x | Micro control horn T2 Ø 1 |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Electric rocket starters (6 pcs) |
1 x | Ferrita 17x10x6.5 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Electric coversion set |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Carbon plate 350x150x5.0 mm |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | T-shape holder metal LAMA |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HITEC D145 SW |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Servo HITEC D941 TW |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Futaba 20 mm servo arm |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Extender tip (6 pcs) |
1 x | Cyano INSTA - FLEX+™ (25g) |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | Cyano INSTA - CURE™ (12g) |
1 x | Ferrita 27x14x7 mm |
1 x | |
1 x | Motor mount for 1200 mm models |
1 x | Fan for A60 |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | A50 Motor Mount Alu complete set |
1 x | Size "M" motor holder for class 600 |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Hacker A30-S Radial Set |
1 x | Central support Speed 280 |
1 x | Motor mount for 1 m models |
1 x | Central support Speed 600 |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Size "L" motor holder for class 600 |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | CORTEX |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | GPS Logger Dymond |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Carbon plate 350x150x3.0 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | VTX 477 Carbon Rotorblade |
1 x | VBar Control Touch, midnight black |
|
13,245.30EUR |