1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Tirpiz Battleship 1:200 |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
2 x | Release wax 250ml |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Universal Colour Paste deep black 50 g |
1 x | Propeller CFK 14x7 |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Spray adhesive AEROFIX 2 |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | WingFix ULTRA Black Edition |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Propeller CFK 20x13 "white" |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
3 x | Round Rod 2,0x1000 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Premium servo extension 25cm |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Premium servo extension 50cm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | 1/12 Pilot "Cougar" |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | M3 Maxi ball link (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | Ball link M3 (6 uds) |
1 x | 1/6 Pilot "Tony" |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
2 x | M3 Maxi ball link (2 uds) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Tape GFK 25 mm |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
2 x | SE Ring 350 mm (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | 20x200 mm battery rings |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Spikes Band (5 m) |
1 x | 1/6 Pilot "Cindy" |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | Joint with bearing M3 22x5,5 |
2 x | SE Ring 450 mm (2 pcs) |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Spray YELLOW Inca Lexan 150ml |
2 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Paint gun for sprays |
2 x | Propeller POWER-PROP 16x10 |
1 x | Round Rod 2,5x1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Spray Graphit 33 |
1 x | Propeller FIALA 15x8 3-Blade |
2 x | Propeller POWER-PROP 13x10 |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | FIALA Propeller 19x12 Electric |
2 x | Propeller POWER-PROP 11x6 |
1 x | Propeller POWER-PROP 12x6 |
1 x | Propeller electric carbon 7x7 |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Propeller electric carbon 6.5x4 |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Propeller electric carbon 6x5 |
1 x | Painting GHT Lexan Black 150 ml |
2 x | Solvent Plasti Dip 1000 ml |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Propeller POWER-PROP 12x9 |
1 x | 500 ml sealer (DOPE) |
2 x | Propeller POWER-PROP 12x8 |
1 x | Universal Colour Paste deep black 250 g |
2 x | Propeller electric carbon 8.5x7 |
1 x | Propeller electric carbon 10x6 |
1 x | Propeller POWER-PROP 13x8 |
2 x | Propeller POWER-PROP 10x6 |
1 x | Propeller electric carbon 8.5x5 |
1 x | Propeller POWER-PROP 15x8 |
2 x | Porpeller HUNTER 400 |
1 x | Nitroverdu 500 ml |
1 x | Propeller POWER-PROP 11x8 |
1 x | FIALA Propeller 23x8 Electric |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Propeller electric carbon 9.5x6 |
1 x | Propeller POWER-PROP 11x9 |
1 x | 1000 ml sealer (DOPE) |
1 x | 20 g tin paste |
1 x | Partall paste 650 g |
1 x | Propeller electric carbon 10.5x7 |
1 x | Propeller electric carbon 9.5x7 |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Hobbylite Filler, Balsa colour |
2 x | Spannlack 1000 ml |
1 x | Propeller POWER-PROP 15x10 |
2 x | Propeller electric carbon 10x8 |
1 x | Propeller POWER-PROP 10x7 |
1 x | Propeller electric carbon 10.5x8 |
2 x | ABS I Strip 10x5x1000 mm |
2 x | Round Rod 5,0x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | 140 mm rods set for direction control |
1 x | USB Charger 12V DC for car |
1 x | Control for forward wheel (MINI) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Cinta Goldfix 1m |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Vest clothes Hispano Aviación |
1 x | SE Ring 330 mm (4 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Tape GFK 38 mm |
1 x | Window mounting channel 5m |
1 x | 100 mm rods set for direction control |
1 x | Foil for sticking flaps and ailerons |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Shirt Hispano Aviación |
1 x | Cap Hispano Aviación |
1 x | M3 Maxi ball link (2 uds) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
2 x | Ball link M3 (10 pcs) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Short ball link M1.6 (6 uds) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Joint with bearing M2 22x5,5 |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
2 x | Ball link M2,5 (10 pcs) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Blade Holder Full (4 blades) |
1 x | Cierva C30 Body Spain |
1 x | LA500 tail empennage |
2 x | Head runner |
1 x | LA500 housing-upper cyclic |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | Fiberglass plate 350x150x1.5 mm |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Conector BEC female (10 pcs) |
2 x | Glass fabric 25 g/m² (1 m²) |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | GPS Altis |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Parachutist |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Piñon motor rotor LA-500 |
1 x | LA500 Blades |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Red smoke canister 100 g |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Chopped glass fibre strands 3 mm |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Glass fabric 25 g (2 m²) |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Keypad ALTIS V4 |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Film release agent PVA 25 ml |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Telemetry interface ALTIS 12 cm |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | LA500 Autogyro |
1 x | Altimeter Altis NAO |
1 x | USB interface ALTIS |
1 x | Telemetry interface ALTIS 20 cm |
1 x | Strip 2,0x2,0x330 mm |
1 x | AIRSPEED SENSOR SBS01TAS |
1 x | Futaba 46 mm servo arm with ball link |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Piston ring for DA-150 |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | Futaba BLS152 - Upper Case |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | Round Rod 6,0x1000 mm |
1 x | Futaba Radio Case |
1 x | Futaba Neckstrap |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Adapter rotula M3 |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | 5 mm M2 variable horn |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Futaba 2x20 mm servo double arm |
1 x | Angle measurer |
1 x | Avia spare blue cockpit (Top Model) |
1 x | 11 mm wing servo holder |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | FUTABA T10 J T-FHSS |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Round Rod 1,5x1000 mm |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | Strip 1,5x1,5x330 mm |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Futaba 25 mm servo arm with ball link |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Ball link M2 (10 pcs) |
1 x | Futaba 38 mm servo arm |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Gates hinge |
1 x | Spray EC Red 400ml |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | 13 mm wing servo holder |
1 x | Propeller RF CFK 14.5x14 |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Micro flex hinge (12 uds) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | 58 mm micro servo cover |
1 x | Bidule 111 3000 mm |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Covered closure or fairings |
1 x | Miniature brass strap hinge, 1 m |
1 x | Pick up DA50/100/150 |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Reed valve for DA 50-R |
1 x | Cylinder for ZG20 |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Extension silicon 10 cm (Futaba) |
|
11,305.33EUR |