1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 2.0x10.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
3 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Steering arm 16 mm Ø 3 mm |
2 x | Locking cable tie 4.6x203 (uds) |
1 x | Electric spoiler 250 mm (2 pcs) |
3 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | One touch canopy lock |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | SUS wire 3m (nylon coated) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | MPX-Dean "T" Adapter |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | CC 01 |
1 x | 4 LiPo XH>EH adapter |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Adapter lead MPX/XT60 |
1 x | Cabel charger transmitter GRAUPNER |
1 x | JETImodel SINGLE BEC |
1 x | CC 03 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | 30 cm BEC cable (female) |
1 x | CM-3 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Dean "T" - Futaba Adapter |
1 x | TrainerCord (master-learner) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | CC 02 |
1 x | 5 LiPo XH>EH adapter |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | USB HLS prog. interface |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Circlick securite |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
2 x | Starter Sullivan-STAR 601 |
2 x | 2,5x60 mm allen screwdriver |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Crimping tool |
1 x | Vacuum pump 12 CFM |
1 x | Starter EM Gear Power 250 |
1 x | Vacuum pump P1-N |
1 x | 2,0x50 mm allen screwdriver |
2 x | Screwdriver for Torx® TX6 |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | Copier 2x20 cm pcs |
1 x | Hot Glue Stick RED |
1 x | Starter EM Gear Power 80 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Ball Link Plier |
2 x | Dust collector for mould cleaning |
1 x | Starter Sullivan-STAR 603 DINATRON |
2 x | Hot Glue Stick GREEN |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | 3,0x60 mm allen screwdriver |
1 x | Hot Glue Stick BLACK |
1 x | 1,5x50 mm allen screwdriver |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Screwdriver for Torx® TX8 |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Z Bender - S Type Tool |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Copier 5x20 cm pcs |
3 x | Z Bender - S Type Tool |
1 x | Digital precision scale up to 2000 g |
1 x | Absorver mount set for 5-10 Kg models |
1 x | 150 Newtons FEMA absorber |
1 x | 100 Newtons FEMA absorber |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | L-Connector 1.5 mm x 1000 mm |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Motor DLE 200cc Premium Muffler |
1 x | DYNAMOMETER S-1580 |
1 x | DPSI RV Mini 6 Magic |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | 12 mm dogdrive props |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | 3 LiPo XH>EH adapter |
2 x | Birch plywood plate 600x300x4.0 mm |
2 x | Beech dowels 3.0 x 1000 mm |
2 x | Birch plywood plate 600x300x1.5 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | |
4 x | BALSA triangular 6x6x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | 102 mm aluminium spinner |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | 10 mm gas motor standoff |
1 x | 1/6 Pilot "Garry" |
2 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Balsa panel 1.0x100x1000 mm |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 22m Fitting barb |
1 x | |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
2 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | SERVO HOLDER |
1 x | Tow hook for tug |
1 x | Towing hook <3m |
1 x | Katana Mini carbon wheel pants (2 pcs) |
2 x | Power MULTIlight |
1 x | |
1 x | DPSI Micro - RCS |
1 x | DPSI Micro MPS |
1 x | Split pin 1.6x16 mm (10 uds) |
2 x | Fully Threaded Steel Rod M3 |
1 x | Pushrod greyline 3/2 with coupler M2 |
2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Motor OS 3820-1200 electric |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
3 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Tool for entel |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Sealing Iron Sleeve STD |
1 x | Mold plugs XT-30 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
2 x | Steel brush wheel with 2.35mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
1 x | Precision wrench L100 mm |
1 x | Mini-handed clamp |
1 x | Support XT60 conector (2 pcs) |
1 x | Support Filtro FESTO |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Support Pitot JETI |
2 x | PowerBox Sensor V3 MPX/Jr |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
2 x | Balsa panel 2.5x100x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Bungee HLG Premium |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Filter Capacitor JR |
1 x | DPSI Ampere & Voltage bundle |
1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | A60-6XS V4 28-Pole |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | MPS Gas-Cap-Powerswitch |
1 x | BALSA triangular 8x8x1000 mm |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Balsa panel 5.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
2 x | Balsa panel 4.0x100x1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
2 x | Balsa panel 1.5x100x1000 mm |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Blind nut M8 (10 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | CORTEX |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | DEMON CORTEXpro |
1 x | Sparkplug ROSSI R8 |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | PPS-4D Propeller |
1 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Axle for motor A50-L |
1 x | A40 Backmountset complete |
1 x | Motor A20-20 L EVO |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | Motor A20-26 M EVO |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Allen wheel collar M4x6 |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | XT-60 Plug Mold |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Motor A200-8 |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Sealing Iron Profi LCD |
1 x | Canopy Latch |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Debonder CA 20g |
1 x | Ciano KAVAN Thin 20g |
1 x | Ciano KAVAN Thick 20g |
1 x | Towing hook |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | 4 mm Prop Adapter M6 |
1 x | Extension MPX-MPX 20 cm |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Thread locker "Medium" 10 g |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | KAVAN CA Activator 150ml |
|
13,536.83EUR |