1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Conector BEC male (10 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | XH male balance (3S) connector (2 pcs) |
1 x | Conector Servo female 4 pines |
2 x | Wing connector 8pin with pin strip, plug & socket |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
3 x | Optotronix Aurora Plug |
2 x | 2 mm male connector (2 pcs) with safety connector |
3 x | Xplorer4 anemometro |
2 x | XH male balance (2S) connector (2 pcs) |
1 x | 30 cm DEANS female connector |
3 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Connectors DEANS (T) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | Gold antispark 4 mm plug |
2 x | MPX Sub-D Adaptor |
4 x | Xplorer3 anemometro |
2 x | Xplorer1 anemometro |
2 x | XH female balance (5S) connector (2 pcs) |
2 x | Connector CAN 15 |
3 x | Xplorer2 anemometro |
2 x | Connectors DEANS 4 pins (1 pair) |
2 x | Paramotor Trike XL |
2 x | Para-RC Mix |
2 x | Set cintas unión paracaídas 145 cm |
3 x | Windsock Ozone L - 700 mm |
2 x | Para-RC Trike "RC-Bullix" |
1 x | Trike XL motor set (motor+esc+prop) |
3 x | Paramotor BackPack XXS (without accessories) |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Windsock Ozone L -1200 mm |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Large flex hinge (12 uds) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Micro flex hinge (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Piloto jet 130 mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Piloto JET 1:3,5 |
1 x | 1/6 Pilot "Cindy" |
2 x | Bungee HLG Premium |
1 x | 1/12 Pilot "Cougar" |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | 1/12 Pilot "Langley" |
1 x | 1/6 Pilot "Buddy" |
2 x | Extinguisher CO2 - 2 Kg |
2 x | Vasa model Catapult |
1 x | Small Crow DLE-170M |
1 x | 3 LiPo XH>EH adapter |
1 x | MPX-Dean "T" Adapter |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | CM-3 |
1 x | Adapter lead MPX/XT60 |
1 x | Adapter lead MPX/EC3 |
1 x | CC 03 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Circlick securite |
1 x | 30 cm BEC cable (female) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | JETImodel SINGLE BEC |
1 x | CC 02 |
1 x | USB HLS prog. interface |
1 x | CC 01 |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | CC 05 |
1 x | 2 LiPo XH>EH adapter |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Propeller POWER-PROP 14x9 |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | MPX Support (2 pcs) |
1 x | MPX housing with flange (4 pcs) |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Bag connector 2 mm |
1 x | Conector XT-30 (hembra) |
2 x | XH LiPo extension lead |
1 x | UHU Por 50ml/40g |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Conector MT-60 (pair) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Parachute BACKUP X100 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Wing OXY 5,0 m2 |
1 x | Dean "T" - Futaba Adapter |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Parachute PV6 for F3J |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Small pinned hinge (12 uds) |
2 x | XH female balance (3S) connector (2 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Miniature brass strap hinge, 1 m |
2 x | XH female balance (4S) connector (2 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Screw M2x6 (10 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Pan head screw M2x16 PH |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Blind nut M5 (4 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Red smoke canister 100 g |
1 x | Cap Hispano Aviación |
1 x | Softshell Hispano Aviación |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | ULTIMATUM 2.0 m orange/blue |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Long Switch On/Off micro |
1 x | PSC 5 |
1 x | Female connector for 10 pines AWG |
1 x | Switching module high voltage SXH |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
3 x | XH male balance (7S) connector (2 pcs) |
1 x | PIN Connector female (100 pcs) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Epoxy 10 min 190g |
2 x | Paramotor BackPack XXS 2 |
1 x | XT-60 connector (male) |
2 x | XT60 Connector with Holder Male 2pcs |
2 x | Mould Resin P 10 kg |
1 x | MR30 connector male |
1 x | MPX Support |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Red 4 mm connector holder |
2 x | MR30 connector female |
2 x | XT-30 connector (pair) |
2 x | Wing conexion 2 servos JR/Graupner 50 cm |
2 x | XH male balance (8S) connector (2 pcs) |
1 x | Protector Connector MPX (1 pair) |
2 x | XH female balance (2S) connector (2 pcs) |
1 x | PCARD Wireless System |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Soporte carbono MR30 (2 pcs) |
2 x | XT-90 connector (pair) |
2 x | XH female balance (9S) connector (2 pcs) |
2 x | XH male balance (4S) connector (2 pcs) |
3 x | XH female balance (8S) connector (2 pcs) |
2 x | XH female balance (7S) connector (2 pcs) |
1 x | XH female balance (6S) connector (2 pcs) |
2 x | XT-60 connector (female) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
1 x | Epoxy 5 min. 500 g (Resin) |
1 x | Ballast 700gr OPALE |
1 x | Connectors MPX black male |
1 x | Conector XT-30 (macho) |
1 x | Connectors MPX black female |
2 x | Connectors banna oro 3 mm (M/F) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Aramid 50 daN 50 m |
1 x | Round flex hinge (12 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Nylon Screw M5x30 |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Smoke set "Glider" |
1 x | Tail wheel for 5-8 kg models |
1 x | Tailwheel for 1-3 kg models |
2 x | |
2 x | 3-blades 20x10 carbon prop Super Silence |
1 x | Vess propeller 13x6 S |
2 x | 24x14 prop Super Silence |
2 x | 3-blades 21x12carbon prop Super Silence |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | CAM-Carbon Light Prop 11x6" |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop left) |
1 x | CAM-Carbon Light Prop 12x7" |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 11x8 |
1 x | Propeller CFK 18x16 |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | Propeller RF CFK 13x6.5 |
1 x | Propeller CFK 14.5x10 Slim |
1 x | 24x12 prop Super Silence |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | 22x10 prop Super Silence |
1 x | Propeller VESS 27A |
1 x | 29x12 prop Super Silence |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | 24x10 prop Super Silence |
1 x | 30x14 prop Super Silence |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Propeller Pleg CAM Carbon 16x13 |
1 x | Propeller CFK 14x10 |
1 x | Propeller Pleg CAM Carbon 14x9 |
1 x | Propeller CFK 14x8 |
1 x | Propeller Pleg CAM Carbon 11x5 |
1 x | 27x10 prop Super Silence |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | 3-blades 29x12 carbon prop Super Silence |
1 x | Propeller VESS 32A |
1 x | Vess propeller 11x7 S |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | CAM-Carbon Light Prop 14x6" (Prop left) |
1 x | CAM-Carbon Light Prop 10x6" |
1 x | CAM-Carbon Light Prop 9x5" (Prop left) |
1 x | CAM-Carbon Light Prop 11x5" (Prop right) |
1 x | CAM-Carbon Light Prop 13x6" (Prop right) |
1 x | CAM-Carbon Light Prop 12x5" (Prop right) |
1 x | Conector BEC female (10 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Set propellers 8x4.5 SF Carbon Multicopter (1x R - 1x L) |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Set propellers 5x3 Multicopter (2cw+2ccw) |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Propeller CFK 17x13 |
1 x | Propeller RF CFK 14.5x14 |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 12X6 |
1 x | Propeller CFK 15.5x10 |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Propeller RF CFK 10x17 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Propeller RF CFK 13x7 |
1 x | Propeller CFK 15x13 |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Propeller Pleg CAM Carbon 10x5 |
1 x | Epoxy 5min KAVAN 2x 100g |
1 x | Propeller Pleg CAM Carbon 10x7 |
|
18,366.40EUR |