1 x | Extractor piñones 2.3/3.2 mm |
2 x | Angled clevis with threaded rod M3 |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
2 x | Profile ABS Square 1 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
2 x | L-Connector 1.5 mm x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | ABS angle 6,0x6,0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
2 x | U Profile ABS 1,0x2,0x1000 mm |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | ABS angle 5,0x5,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | Profile ABS half cane 2.0x1000 mm |
3 x | SERVO HOLDER |
2 x | Tow hook for tug |
1 x | Towing hook |
1 x | Towing hook <3m |
1 x | Fixed launching hook |
1 x | Towing hook |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | 25 mm reinforced hinge |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Long pinned hinge (12 uds) |
2 x | Flap hinge (6 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | 15 mm reinforced hinge |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Smoke set "Glider" |
1 x | M3 black washers (4 pcs) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Ferrita con funda |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
2 x | Gear for MICRO BB |
1 x | 120x60 mm SLH KOVO wheel |
2 x | Gear for D 200 BX |
2 x | Servo KST A08H V6.0 3,2Kg HV |
2 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
3 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | PS-050 TONEGAWA Servo |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | SAVOX SH 0254 servo |
2 x | ABS angle 2,0x2,0x1000 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | ALU servo arm 90º 3 mm shaft |
2 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
1 x | Cable coupler M2x66 (2 uds) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | wire tensioner (black) |
1 x | Cable coupler M3 (10 uds) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | wire tensioner (blue) |
1 x | 5 mm Prop Adapter M8 |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | 6 mm Prop Adapter M8 |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
2 x | Profile ABS Square 4 x 1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | DJI Mavic Air Fly More Combo |
1 x | DJI FPV Combo |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | TS832 to Gopro AV/Power Cable |
2 x | DG-303 ACRO 3750 mm (Airworld) |
2 x | Fournier RF-4D |
2 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
2 x | Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Rubber profile 8-2 mm 2M |
2 x | Profile ABS half cane 6.0x1000 mm |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
3 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Adjustable launching hook |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | T-Hose connector 3-3-3 mm |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Landing gear strap small (4 uds) |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Retract undercarriage |
1 x | 150 Newtons FEMA absorber |
1 x | Servo Dymond D 37 Eco |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Servo GO-09 9g |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Charger LiPo Charger4 |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Air pressure gauge |
1 x | Servo HITEC HS-65 HB |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Axle wheel with accesories |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | AXI 2808/16 V2 Long |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Z-shaped servo mount |
1 x | Fiberglass motor-holder for electric motors |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Brake for 140 mm wheels |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | A50 Motor Mount Alu complete set |
1 x | Spring clamp for tube Ø50 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | GP 15 JETA |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | 270 mm 3/3 mm shaft ship |
1 x | GPS Logger Dymond |
1 x | Soporte servo KST X08/H and Plus |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | USB programador GO servos |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Servo GO-02 Digital 1.8g |
1 x | Servo GO-1053 MG 20.0kg |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Foreman, scale 1:32 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Spikes Band (5 m) |
1 x | Receiver bed (Blue) |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | AXI 2826/10 V2 Long |
1 x | Propeller 12x6 Falcon electric |
1 x | AXI 2814/10 V2 Long |
1 x | AXI 2814/20 V2 |
1 x | AXI 2820/14 V2 |
1 x | Metalic motor holder for class 550-600 |
1 x | Size "M" motor holder for class 400 |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Absorver mount set for 5-10 Kg models |
1 x | 5 mm Prop Adapter M6 |
1 x | Mudguard wheels 112/127 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Covered closure or fairings |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Kobuz 5000 mm (Airwold) |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | Fox MDM 1 4000 mm Std. |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Gobe R-26S (Airwold) |
1 x | ASH 31 6.08m Composite Hollow Molded |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | ASK 21 6.5m + pylona |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | ASW 15 5000 mm (Airwold) |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | LO 100 ARC 3.3m,cabina |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | Fox MDM 1 6000 mm |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | LS-8 GFK 6m Glider |
1 x | 290 mm M5 Prop shaft |
1 x | 290x4 mm M4 shaft ship |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Slave-cable USB Easy Sim |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | EasyFLY Addon |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Interface Realflight Simulator |
1 x | GameCommander USB Universal |
1 x | Gates hinge |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Robart Door Hinge (Pk2) |
|
39,714.41EUR |