1 x | Ferrita 17x10x6.5 mm |
1 x | Ferrita con funda |
1 x | Ferrita 14x8x5.5 mm |
1 x | Spinner 40 mm Black (Kavan) |
2 x | 75 mm spinner (Carbon Imitation) |
2 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Z Bender - S Type Tool |
2 x | Spray adhesive AEROFIX 2 |
1 x | Spray EC Red 400ml |
1 x | Screwdriver for Hexagon 1,27mm |
2 x | Ball Link Plier |
1 x | 500 ml sealer (DOPE) |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Screwdriver for Torx® TX8 |
2 x | Release wax 250ml |
1 x | Painting GHT Lexan Black 150 ml |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Locking cable tie 4.6x203 (uds) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Covered closure or fairings |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Parachute BACKUP X100 |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | BALSA triangular 8x8x1000 mm |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | 25 mm reinforced hinge |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Ballast 700gr OPALE |
1 x | Paramotor Trike XL |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Para-RC Trike "RC-Bullix" |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Windsock Ozone L - 700 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Set cintas unión paracaídas 145 cm |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Flap hinge (6 pcs) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Opale Rucksack |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
3 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Aramid 50 daN 50 m |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Micro flex hinge (12 uds) |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Long pinned hinge (12 uds) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | 18 mm reinforced hinge |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | BALSA triangular 6x6x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Para-RC Mix |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Beech dowels 3.0 x 1000 mm |
2 x | MAX pilot ARTF |
1 x | Wing OXY 5,0 m2 |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
2 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Profile ABS Square 1 x 1000 mm |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Support pump Xicoy X45 |
1 x | Soporte filtro FESTO (4 pcs) |
2 x | Carbon plate 350x150x3.0 mm |
1 x | Spinner 55 mm White (Kavan) |
1 x | Balsa panel 1.0x100x1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Hot Glue Stick BLACK |
1 x | Kwik link unmount tool |
2 x | Partall paste 650 g |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Universal Filter |
1 x | 1000 ml sealer (DOPE) |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Universal Colour Paste white 50 g |
2 x | 2,5x60 mm allen screwdriver |
1 x | Precision wrench L100 mm |
1 x | |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | 12 mm portholes (10 pcs) |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | 39,0 mm propeller (rigth propeller) |
1 x | Spinner 82mm Black ventilado |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | 28 mm turnbuckle |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Manometer 4 mm |
1 x | Trailing leg 131 mm |
1 x | Air pressure gauge |
1 x | Hose connector stopper 4 mm |
1 x | Mini neumatic retract landing gear |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
1 x | 10 mm dogdrive props |
1 x | F3A carbon 85 mm spinner for AXI |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | 290 mm M5 Prop shaft |
1 x | 10 mm portholes (10 pcs) |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | 12 mm mast holder |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
2 x | Lite Plywood panel 600x300x2.0 mm |
2 x | Robart Door Hinge (Pk2) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
3 x | Round flex hinge (12 uds) |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Balsa panel 1.5x100x1000 mm |
2 x | ABS angle 3,0x3,0x1000 mm |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Gates hinge |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Oracover Black 2 m |
1 x | 1,5x50 mm allen screwdriver |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Indoor Brushed motor kit |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | LA500 housing-lower cyclic |
1 x | LA500 pre-rotation gear hub |
1 x | LA500 ciclic lever |
1 x | LA500 nose |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Screwdriver for Torx® TX6 |
1 x | Digital scale up to 40 kg |
1 x | Cut tube |
1 x | 2,0x50 mm allen screwdriver |
1 x | |
1 x | Starter EM Gear Power 80 |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Allen wheel collar M3x5 |
1 x | PPS-4D Propeller |
1 x | Allen wheel collar M3x3 |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | 5 mm Prop Adapter M8 |
1 x | Cierva C30 Body Spain |
1 x | Head core |
1 x | Motor rotor LA-500 |
1 x | Blades 330mm |
1 x | LA500 housing-upper cyclic |
1 x | Head runner |
1 x | Bearing housing |
1 x | Cierva C30 Elevator |
1 x | LA500 Autogyro |
1 x | LA500 rotor head core |
1 x | LA500 Blades |
1 x | Head lower part |
1 x | Autogyro Cierva C30 Spain |
1 x | Head spacer |
1 x | LA500 pre-rotation gear |
1 x | Head upper part |
1 x | Dust collector for mould cleaning |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Cleat 20 mm (2 pcs) |
1 x | Coupling for 3 mm axis |
1 x | Escalera gris 5 mm (L 60mm) |
1 x | Eje barco 450x4 mm M4 |
1 x | Coupling bush 5 - 5 mm |
1 x | Propeller Pleg CAM Carbon 14x8 |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | Cleat 10 mm (2 pcs) |
1 x | PT 16x10 E Propeller |
1 x | Cancamo Ms 7 mm (50 pcs) |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Rubber profile 6-2 mm 2M |
2 x | BALSA trip 3.0x3.0x1000 mm |
|
7,419.20EUR |