2 x | Allen wheel collar M3x3 |
3 x | Cockpit aluminium closing |
3 x | Cable grommet 9.5 mm (4 uds) |
2 x | 45 mm rods set for direction control |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
3 x | Clip fixing for wing (2 pcs) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 140 mm rods + T patellas set for direction control |
2 x | 90 mm rods + T patellas set for direction control |
1 x | Allen wheel collar M4x6 |
1 x | Allen wheel collar M4x4 |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Allen wheel collar M3x5 |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
3 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
3 x | 140 mm rods set for direction control |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | 100 mm rods + T patellas set for direction control |
3 x | 100 mm rods set for direction control |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Ferrita 17x10x6.5 mm |
2 x | Short ball link M1.6 (6 uds) |
2 x | Ball link M3 (10 pcs, flat ball) |
1 x | SE Ring 200 mm (2 pcs) |
2 x | Short ball link M2 (6 uds) |
1 x | Socket head ball link M3 (2 uds) |
2 x | SE Ring 240 mm (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
2 x | M2,5 5Diam metal ball link V3 (2 pcs) |
3 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Ball link M3 (10 pcs) |
2 x | Tape GFK 38 mm |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | Short ball link M3 (6 uds) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Cinta Goldfix 1m |
1 x | Marker ties (20 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Joint with bearing M2,5 22x5,5 |
2 x | Ring 320 mm length (5 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Ball link M1.6 (6 uds) |
3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Ball link M2,5 (10 pcs) |
2 x | 6 mm hexagonal ball link M3 (10 pcs) |
2 x | Cockpit aluminium closing 4.7g |
1 x | Control for forward wheel (MINI) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Covered closure or fairings |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
3 x | SIMtransmitter 6 Mode 2 |
1 x | GameCommander USB Universal |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | SUS wire 3m (nylon coated) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | EasyFLY Addon |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
3 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | 11 mm Rubber pads (14 pcs) |
3 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
2 x | 102x26 Ø6.0 mm aluminium core wheel |
2 x | Interface Realflight Simulator |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Glow starter with charger 230v |
2 x | M3 Maxi ball link (2 uds) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
3 x | M3 Maxi ball link (2 uds) |
1 x | Ball link M2 (10 pcs) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Tape GFK 25 mm |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Ball link M3 RPA's-UAV's |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Long ball link M2 (6 uds) |
2 x | M2 5Diam black ball link V2 (2 pcs) |
2 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Manometer 4 mm |
1 x | Transmitter GRAUPNER MZ-24 Pro |
2 x | 80 mm rods set for direction control |
1 x | Flap hinge (6 pcs) |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Window mounting channel 5m |
1 x | USB Mini Camera endoscope |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Cockpit aluminium closing 5.4g |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Charger LiPo Charger4 |
1 x | Conector JAPAN G2 Set 5 pares |
2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Cockpit metalic closing |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Lead with adhesive (2 pcs) |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | Split pin 1x8 mm (10 uds) |
2 x | Wing bolts M6 Steel screw Red (2 pcs) |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | ABS tube 8.0x6.0x1000 mm |
2 x | ABS tube 4.0x3.0x1000 mm |
2 x | ABS tube 7.0x6.0x1000 mm |
2 x | ABS tube 5.0x4.0x1000 mm |
2 x | ABS tube 3.0x1.0x1000 mm |
2 x | Propeller CFK 13x9 |
2 x | Propeller CFK 18x9 |
1 x | Plastic wheels 36 mm (2 pcs) |
2 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
2 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
2 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | Superlight deluxe wheel 45 mm (2 pcs) |
2 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Propeller CFK 14x8 Slim |
1 x | Propeller CFK 20x13 "white" |
2 x | Propeller CFK 14.5x10 Slim |
1 x | Propeller CFK 16x13 |
2 x | Rubber wheel Ø 58mm x 21mm (2pcs) axis Ø 2.6mm |
1 x | Lightweight aircraft wheel, 45x18.5x2 |
1 x | Wheel 38 mm V2 |
1 x | Cooler motor type 400 |
2 x | Propeller 8x4 Electric |
1 x | Propeller 10x4,7 SlowFlyer |
2 x | Rubber wheel Ø 45mm x 16mm (2pcs) axis Ø 2.1m |
3 x | Foam wheel Ø 351 mm (2 pcs) |
2 x | Cooler motor type 280 |
1 x | Plastic wheels 28 mm (2 pcs) |
2 x | Propeller 9x7 SlowFlyer |
1 x | Superlight deluxe wheel 40 mm (2 pcs) |
2 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
2 x | Lightweight aircraft wheel, 55x18.5x3 |
2 x | Wheel 18 mm |
2 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
2 x | Reductora IPS dual-motor 10,7:1 with spinner |
2 x | Cooler motor type 300 |
2 x | Wheel 28 mm |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Wheel 22 mm |
2 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | Super light ∅45x9 mm axi ∅3 mm metalic core wheel |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
2 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
2 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | Propeller 3x3 |
2 x | Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm |
2 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
3 x | Xplorer3 anemometro |
1 x | Xplorer2 anemometro |
2 x | Xplorer4 anemometro |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | DUPLEX 2.4EX RC Switch |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | DUPLEX MUI 50 Sensor |
1 x | XPower XC5030/14 LS |
1 x | Receiver R6008HV-A comatible FUTABA |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | MT 125 temperature sensor |
1 x | AddCAP 10AS capacitors |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | XPower XC4226/12 LS |
1 x | Motor A20-20 L EVO |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
2 x | Shaft sleeve LAMA |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Axle for motor A30-XL V2 |
1 x | Shaft for A60-L (140mm) |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Kavan Car 25% nitro 1l |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Flybar support metal LAMA |
1 x | DUPLEX MUI 30 Sensor |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | Blade holder metal LAMA |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Receiver RSF08SB comatible FUTABA |
1 x | Male connector for 10 pines AWG |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Shaft for A60-L V4 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Canopy Latch |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | ABS tube 8.0x7.0x1000 mm |
2 x | Fiberglass tube 6/4x1000mm |
1 x | Propeller CFK 15x13 |
1 x | Propeller CFK 12.75x13 |
1 x | Propeller CFK 16x17 |
1 x | Propeller CFK 14x10 |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | 120x60 mm C SLH KOVO wheel |
1 x | Retract undercarriage |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | 100x50 mm SLH KOVO wheel |
2 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | Device Terminal |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Propeller CFK 12.5x6.5 |
1 x | Propeller RF CFK 10x17 |
1 x | Concave-Convex sandpaper file 13 mm |
2 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | NoNa BB wheel Ø130x40mm in pair |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Telemetry interface ALTIS 20 cm |
1 x | Telemetry interface ALTIS to Futaba |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Propeller CFK 23x12 |
1 x | Propeller CFK 12X6 |
1 x | Propeller RF CFK 13x6.5 |
1 x | Propeller CFK 18x17 |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Propeller CFK 11x8 |
1 x | Propeller CFK 14x8 |
1 x | Propeller CFK 15x16 |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 20x13 |
1 x | Propeller CFK 18,5x12 |
1 x | Propeller CFK 18x19 |
1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
2 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
2 x | Wheel FEMA 127 mm / 6 mm |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
2 x | Wheel FEMA 178 mm / 8 mm |
1 x | Superlight wheel 100 mm with valve (2 pcs) |
1 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | Wheels 270mm (2 pcs) |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | Rubber wheel Ø 50mm x 24mm (2pcs) axis Ø 3.1m |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Nose wheel 62 mm |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
1 x | PU aircraft tyre, 45x16x3 mm |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Altimeter Altis NAO |
1 x | Altimeter Altis V4 |
|
10,585.01EUR |