2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Cockpit plastic closing |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
4 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | One touch canopy lock |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | SUS wire 3m (nylon coated) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Canopy Latch |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
3 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Bungee HLG Premium |
1 x | PowerBox Champion SRS |
1 x | OLED-Display for PowerBox Mercury SRS |
3 x | Extension for LC-Display 50cm |
1 x | PowerBox PROFESSIONAL |
1 x | PowerBox MagSensor red connector |
1 x | POWERBOX Magic Jeti Switch Royal SRS, Champion SRS |
1 x | SPARK Switch 5.9v |
2 x | PowerBox Competition |
1 x | PowerBox PIONEER incl. microSwitch |
2 x | PowerBox MERCURY SR2 |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | BlueCom™ Adapter (iOS) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Smoke set "M" |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Optical RPM Sensor |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | CC 05 |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
2 x | Blue "FUEL VENT" round aluminum overflow socket |
1 x | 1000 ccm complete gasoline fuel tank |
4 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
1 x | 700 ml complete glow fuel tank |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
3 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
2 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Racor 4/3 mm |
2 x | Pushrod octagone 4/3 with coupler M3 |
2 x | Split pin 1x8 mm (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
2 x | Allen wheel collar M3x3 |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | Lead with adhesive (2 pcs) |
2 x | FESTO connector M7 barb fitting XL Tygon |
1 x | T-Hose connector 3-3-3 mm |
1 x | Secraft Fuel system v2, red color |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Extension MPX-MPX 20 cm |
1 x | Extension for SensorSwitch 60cm |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | PowerBox MagSensor black connector SRS/Champion |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | External LED's (2 pcs) |
1 x | MicroMatch PowerBox |
2 x | Adapter lead MPX/XT60 |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | 50m servo "Premium" wire (white/red/blue) |
4 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Tape GFK 38 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | SE Ring 300 mm (2 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Ring 320 mm length (5 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Cinta Goldfix 1m |
1 x | Spikes Band (5 m) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Tape GFK 50 mm |
1 x | Indoor hinge with servo arm integraded |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Excentric gearbox for 2,3mm axis (3,0:1) |
1 x | Excentric gearbox for 3,2mm axis (3,0:1) |
1 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS CONNECTIONS |
1 x | Maxi Fuel Filter |
1 x | FUELING VALVE GASOLINE LARGE (1PC) |
2 x | 250 mm / 16 mm Airbrakes |
2 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
2 x | Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return |
1 x | HOPPER tank Digitech 100 ml |
1 x | Hopper UAT Sebar 600 ml |
2 x | Gas or Kerosene Refueling Dry-Break Ports w/Return Line |
1 x | Fuel Station 30L |
2 x | Neoprene tube 7,5x3,5 mm (1 m) |
1 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS ELBOW CONNECTIONS |
1 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x racor 6mm CLASSIC PRO |
1 x | Hopper UAT Sebar 400 ml |
1 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x FESTO 90º 6mm CLASSIC PRO |
1 x | Fuel tank 500ml (17oz) |
1 x | Fuel tank grommet |
1 x | ITRAP 50 (175ML) CLASSIC PRO, COMPRESSION BARB FITTINGS - SUIT X |
1 x | Intairco CMB Super Filter - 6mm Barb |
1 x | Fuel tank fiberglass Easy Jet 2,2 l |
1 x | Hopper 125 ml XICOY with support |
1 x | FuelTank Cap (red) |
1 x | Fuel Station 20L |
1 x | HOPPER tank INTAIRCO iTrap 50 175 ml 3x racor 6mm CLASSIC PRO |
1 x | Hose clips 6 mm |
1 x | Hopper 125 ml INTAIRCO |
1 x | Cockpit metalic closing |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | 100 mm rods + T patellas set for direction control |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | 45 mm rods + T patellas set for direction control |
2 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
2 x | 140 mm rods + T patellas set for direction control |
1 x | 90 mm rods + T patellas set for direction control |
2 x | 140 mm rods set for direction control |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Motor B40-10 L |
1 x | PowerBUS to PWM |
1 x | Marker ties (20 pcs) |
1 x | LA500 housing-upper cyclic |
1 x | Cierva C30 simulated motor |
1 x | Head core |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Rotorshape Autogyro |
1 x | Balls 4 mm |
1 x | LA500 tail empennage |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Central support Speed 280 |
1 x | Motor holder for AC 28/7 |
1 x | Extension for SensorSwitch 30cm |
1 x | Fiberglass motor-holder for electric motors |
1 x | Conector JR Servo female (10 pcs) |
1 x | PowerBox iGyro SRS + GPS Modul |
1 x | 10 mm gas motor standoff |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Motor A50-16 S V4 |
1 x | 2 piece mounting frame |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | PowerBUS Splitter |
1 x | Tape GFK 25 mm |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | USB Mini Camera endoscope |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | SE Ring 250 mm (2 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Stickers-digit for marking |
1 x | LA500 Blades |
1 x | Head lower part New |
1 x | LA500 housing-lower cyclic |
1 x | Cierva C30 Elevator |
1 x | Pilot LA 500 |
1 x | Rotor Mast |
1 x | Rotorshape Elevator |
1 x | Cierva C30 spanish decoration Stickers |
1 x | Raer wall |
1 x | Washer 2.2×4 |
1 x | LA500 pre-rotation gear |
1 x | LA500 Autogyro |
1 x | Battery plate |
1 x | Servo Arm aluminium ALU-STAR |
1 x | Parachute XTRALITE S |
1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
1 x | FIALA Propeller 25x10 |
1 x | FIALA Propeller 24x12 |
1 x | Deposito SECRAFT V2 1000 ml Gas |
2 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | Fuel dot V3 (Red) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Fuel dot Gold color |
1 x | KONDOR 15-92 |
1 x | Fuel line plugs (Black) |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | TYGON tubo 15 m Diam. 3.4 x 2.0 mm |
1 x | KIRA 480-31 5,2:1 |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | KIRA 400-34 |
1 x | Tubo espiral FESTO 6x1 Black |
1 x | Tygon tube 9.53 x 6.35 mm 15 m |
2 x | 280 cc gasoline fuel tank complet |
1 x | KWIKFILL FUELING VALVE GLOW |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | Shaft KPG25 4,2:1 |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 45 mm rods set for direction control |
2 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | double Fuel Dot V2 (silver) |
1 x | 500 ccm gasoline fuel tank |
1 x | Fuel line plugs (Blue) |
1 x | "Taxi Tank" Fuel Tank |
1 x | Fuel dot red |
1 x | Deposito DUBRO 3000cc-100oz |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | PYRO 600-11 |
3 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | Gearbox KPG27 5,2:1 |
1 x | Kerosene valve EVO Jet |
1 x | KIRA 480-34 |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
2 x | Tip wing protector 30x10 (2 pcs) |
2 x | Tip wing protector 40x14 (2 pcs) |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | Fuel Dot (Silver) |
1 x | Deposito DUBRO 360 ml - 12 oz |
1 x | Foam air filter Ø 48 mm, blue |
2 x | Electronic double valve landing gear |
1 x | Fuel Fittings-Red |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Fuel dot blue |
1 x | 18m Fitting barb |
1 x | Black "FUEL VENT" round aluminum overflow socket |
2 x | |
1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | Fuel Dot (RED) |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | Glow/Gas/Smoke/Kerosene filter |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
2 x | Tygon DUBRO Medium 15m |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | KIRA 600-30 6,7:1 |
1 x | KIRA 400-27 |
1 x | Tygon tube 7.94 x 4.7 mm 15 m |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | KIRA 480-26 5,2:1 |
1 x | KIRA 600-17 |
1 x | Fuel line plugs (Silver) |
1 x | Fuel line plug Small 2 pcs |
1 x | Tygon tube 4.8 x 3.2 mm 1m |
1 x | KIRA 480-43 5,2:1 |
1 x | KIRA 600-16 |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | KIRA 600-24 6,7:1 |
1 x | KIRA 600-20 6,7:1 |
1 x | Adapter SPEED 480 whit axle short |
1 x | KIRA 480-34 5,2:1 |
1 x | KIRA 600-20 |
1 x | Fuel line plugs (Red) |
1 x | Adapter FUN 400/480 |
1 x | BEC extension JIVE |
1 x | MAMBO 17 |
1 x | Simple take for fuel tank |
1 x | PYRO 600-12 |
1 x | KIRA 500-26 6,7:1 |
1 x | Adapter SPEED 500/600 |
1 x | Tygon tube 4.8 x 3.2 mm 15 m |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
1 x | Gas combustible tube |
1 x | Kontronik Kosmik 30 cm Cable Kit |
1 x | KIRA 400-39 5,2:1 |
1 x | Fuel line plug Large 2 pcs |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | 80 mm rods set for direction control |
2 x | Allen wheel collar M3x5 |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Allen wheel collar M4x4 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Window mounting channel 5m |
|
19,343.68EUR |